What engine is equipped in the BJ40?

Where is the interior trunk switch for the BYD Qin located?

The interior trunk switch for the BYD Qin is located below the driver's side door on the left. Here is some related information about BYD: 1. Brand History: BYD Company Limited was founded in 1995, starting with a team of just over 20 people. By 2003, it had grown into the world's second-largest producer of rechargeable batteries and established BYD Auto in the same year. Starting as a battery manufacturer, BYD initially played the role of an 'outsider' in the automotive industry. However, leveraging its 'independent intellectual property rights' and the acquisition of Qinchuan Auto, BYD gained a first-mover advantage over other newcomers. 2. Brand Introduction: BYD Auto adheres to a development strategy of independent R&D, production, and branding, committed to creating affordable and high-quality vehicles for the masses. The product designs incorporate advanced international trends while aligning with Chinese cultural aesthetics.

13

3

Share

How long can a car go without inspection before being scrapped?

A car that has not been inspected for 3 years will be forcibly scrapped. The criteria for compulsory scrapping are: Reaching the prescribed service life; After repair and adjustment, it still does not meet the national standards for in-use vehicle safety technical requirements; After repair and adjustment or the adoption of control technology, the emissions of pollutants or noise into the atmosphere still do not meet the national standards for in-use vehicle requirements; Failing to obtain the motor vehicle inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period. Motor vehicle scrapping process: The car owner applying for scrapping and renewal must fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" in duplicate and affix the owner's seal. Apply at the registration acceptance counter. For vehicles that have reached the scrapping age, the "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age, after verification by the motor vehicle inspection counter and confirmation that they meet the scrapping standards, the "Vehicle Scrapping Notice" will be issued. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Change Form", "XX Province Updated Vehicle Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates will be reclaimed, and the case will be submitted for approval according to regulations to complete the scrapping registration.

10

4

Share

Does Snow Cause Significant Damage to Car Paint?

After snowfall, the most vulnerable part of a vehicle is its paint. Snowwater contains high levels of salt and various alkaline components. If splashed onto the car body or chassis and not cleaned promptly, it can cause severe corrosion to the paint, chassis, and tires. Timely Car Washing: It is essential to wash the car promptly after snowfall because the muddy water on roads contains salt and various alkaline substances that adhere to the body, tires, wheel hubs, and chassis. If left uncleaned and covered by snow for an extended period, it can lead to severe corrosion of the paint and chassis. When washing the car, use lukewarm water as extremely cold or hot water can damage the paint in cold weather. After washing, dry the windows thoroughly to prevent water from freezing in the door seams. If windows freeze, avoid forcing them open or closed, especially for power windows, as this can easily cause malfunctions. Automatic Car Wash: After snowfall, always opt for a professional automatic car wash. These facilities use copious amounts of flowing water and neutral detergents to gently rinse the car body. Special wheel brushes thoroughly clean sludge from the wheel hub gaps. Most importantly, automatic car washes are equipped with undercarriage rinsing systems that use powerful water jets to completely remove mud and water adhering to the chassis surface.

2

3

Share

Why Are Used Aston Martins So Cheap?

In fact, not all used Aston Martins are that cheap—only some lower-end models and older-year vehicles have relatively low prices, while newer and high-end models still command high prices in the used car market. Whether a used Aston Martin is worth buying depends on individual needs. Below are details about the Aston Martin DBX: 1. Detail One: The 4.0-liter twin-turbocharged V8 engine in the Aston Martin DBX delivers a maximum power of 405 kW at 6,500 rpm and a peak torque of 700 Nm between 2,200 and 5,000 rpm. This engine features direct fuel injection and an aluminum alloy cylinder head and block, paired with a 9-speed automatic transmission. 2. Detail Two: The 9-speed automatic transmission enhances gear-shifting smoothness and fuel efficiency, while also offering better reliability and durability. The DBX employs a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. 3. Detail Three: The double-wishbone suspension reduces body roll and minimizes brake dive, significantly improving handling and ride comfort. The multi-link suspension, a more complex independent setup derived from the double-wishbone design, replaces the two wishbones with individual links. This configuration enhances tire grip, further boosting the car's handling performance.

8

1

Share

What are the speed ranges for gears 1 to 5?

The speed ranges for gears 1 to 5 in a manual transmission car are as follows: 1st gear: 1st gear is the starting gear. When the vehicle is stationary, slowly release the clutch and gently press the accelerator. The speed range should be 0-15 km/h. 2nd gear: After a smooth start, when the RPM reaches between 1600 and 2200, you can shift to 2nd gear. The speed range for 2nd gear is 20-30 km/h. 3rd gear: When the car is around 2200 RPM, you can shift to 3rd gear. The speed range for 3rd gear is 40-50 km/h. 4th gear: When the car is around 2200 RPM, you can shift to 4th gear. The speed range for 4th gear is 50-80 km/h. 5th gear: When the car is around 2200 RPM, you can shift to 5th gear. The speed range for 5th gear is 80-150 km/h. The reason why the car's gear must match the speed is that when the speed corresponds to the gear, the car's performance is at its best, and the thermal efficiency of the fuel is the highest. If the speed and gear do not match, such as high speed with low gear or low speed with high gear, it will not only increase fuel consumption but also cause irreversible damage to the engine and transmission. Therefore, the gear and speed must be matched while driving. When shifting gears, the clutch and accelerator must be well-coordinated. Press the clutch pedal to the floor, then release the accelerator pedal, and quickly shift to the corresponding gear. After shifting, immediately release your hand and do not keep it on the gear lever for too long, as this can easily damage the gear lever. For manual transmission cars, the principle of "accelerate before upshifting, decelerate before downshifting" must be remembered. Before upshifting, "rev" the accelerator to increase the speed first, and before downshifting, "release" the accelerator to reduce the speed first. Before shifting gears, the clutch pedal must be fully depressed, and the gear lever should be operated lightly, quickly, smoothly, and accurately.

8

1

Share

What Causes a Motorcycle Spark Plug to Not Discharge?

Motorcycle spark plugs do not discharge due to a malfunction in the ignition system. Motorcycle spark plug power supply principle: The 15KV voltage on a motorcycle spark plug is generated by a dedicated high-voltage circuit. Inspection methods: Check whether the motorcycle battery has power or if there is voltage but no current output. The motorcycle battery supplies power to the self-excited oscillation circuit for ignition, which converts it into the low-voltage pulse voltage required by the low-voltage coil of the high-voltage coil. If the battery has no power, it cannot generate the low-voltage pulse voltage, preventing the high-voltage coil winding from producing a high-voltage pulse. This results in no voltage on the spark plug, making ignition impossible. Old batteries may show voltage but fail to output current when in use. Solution: Replace with a new battery for testing. If the power supply line from the motorcycle battery to the self-excited oscillation circuit is disconnected or has poor contact, the self-excited oscillation circuit cannot generate the low-voltage pulse voltage required by the low-voltage coil of the high-voltage coil. This prevents the high-voltage coil winding from producing a high-voltage pulse, resulting in no voltage on the spark plug and making ignition impossible. Solution: Carefully check for broken copper traces, cold solder joints, or other circuit disconnection issues. If the transistor or oscillation module in the self-excited oscillation circuit is damaged, or if the inverter capacitor is faulty, no low-voltage pulse will be generated. This prevents the high-voltage coil winding from producing a high-voltage pulse, resulting in no voltage on the spark plug and making ignition impossible. Solution: Remove the transistor and test it with a multimeter to check for damage. Use the multimeter's capacitance setting to measure if the capacitor's capacity has changed. If any part of the self-excited oscillation circuit, its power supply, the low-voltage winding of the high-voltage coil, or the high-voltage winding is disconnected, the high-voltage coil winding cannot produce a high-voltage pulse. This results in no voltage on the spark plug, making ignition impossible. Solution: Carefully inspect the connecting wires and copper traces for breaks, cold solder joints, or other issues.

11

5

Share

What engine is equipped in the BJ40?

Where is the interior trunk switch for the BYD Qin located?

How long can a car go without inspection before being scrapped?

Does Snow Cause Significant Damage to Car Paint?

Why Are Used Aston Martins So Cheap?

What are the speed ranges for gears 1 to 5?

What Causes a Motorcycle Spark Plug to Not Discharge?

Where to Pour Hot Water When the Handbrake is Frozen?

What is the ground clearance of the 2021 Honda CR-V?

What do you think of Peugeot's new logo?

Which Volkswagen model is equivalent to the Audi Q3?