What engine is equipped in the Bestune X40?
3 Answers
The engine of the Bestune X40 is independently developed by FAW Car Co., Ltd. under China FAW Group, making it a domestically produced engine. The engine model of the Bestune X40 is CA4GB16, with a maximum power output of 84kW, a maximum torque of 155 N·m, and a maximum horsepower of 114. For daily maintenance of the Bestune X40's engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.
The Besturn X40 is equipped with a 1.6L naturally aspirated engine from the CA4GB16 series, delivering a maximum power output of around 110 horsepower. This four-cylinder engine, based on FAW's technological platform, features a compression ratio of 11.2:1. It offers smooth daily driving performance, with urban fuel consumption approximately at 8L/100km, dropping to just over 6L on highways. Owners with several years of driving experience praise its durability and low maintenance costs, mentioning that oil and filter changes are straightforward and hassle-free. Engine noise becomes slightly noticeable at high speeds but remains unobtrusive in city driving. While it may not be the most exhilarating option for those seeking dynamic performance, it's well-suited for family use, offering economical and practical benefits.
The Besturn X40 is equipped with a 1.6L naturally aspirated engine. I remember when I used it for my daily commute, the average fuel consumption was around 7.5L. The power was just adequate, not too strenuous for overtaking on slopes. As a daily driver, the engine response was stable without major issues, and the maintenance intervals were long—changing oil and spark plugs didn’t cost much. It wasn’t sluggish at city traffic lights, and friends often praised its stability when riding along. On long highway trips, the power felt a bit ordinary, and engine noise became noticeable at higher RPMs, but playing some music could easily cover it up. Overall, it’s a hassle-free and economical choice for family use.
