What engine is equipped in the 2009 Geely Vision?

1 Answers
Elijah
07/29/25 6:36pm
2009 Geely Vision is equipped with a 1.5L naturally aspirated engine, featuring 4 cylinders arranged in an L-formation. The engine has a cylinder bore of 78.7mm and a stroke of 77mm, with natural aspiration intake. It is paired with a 5-speed manual transmission, delivering a maximum output power of 78 kW and a peak torque of 135 N·m. The 2009 Geely Vision is a compact car under the Geely brand, with body dimensions of 4602mm in length, 1725mm in width, and 1485mm in height, along with a wheelbase of 2602mm. The car features a 4-door, 5-seat sedan body structure and adopts a front-engine, front-wheel-drive layout.
Was this review help?
9
5
Share
More Forum Discussions

How to turn off a Porsche Cayenne?

Owners only need to carry the sensor card and stand within the detector's range, then directly open the door for easy access to the car. Without pressing the brake, pressing the one-touch start button turns on the vehicle's power. Press and hold the brake, shift to N or P gear, then press the button to start the engine. When parking, shift to P or N gear. With the engine running, simply press and hold the brake and lightly press the one-touch start button to immediately turn off the engine.
17
2
Share

What to Do When the Car Cigarette Lighter Won't Pop Out?

Solutions for a car cigarette lighter that won't pop out: You can try pulling it out by hand, but avoid using excessive force. Gently rotate it while pulling vertically upwards. If the lighter is glowing red and functioning normally, it indicates that the spring clip in the socket is damaged. If it's not glowing red and simply won't pop out, it might be due to a blown fuse, causing the lighter to lose power and preventing it from ejecting properly. The cigarette lighter operates at 12 volts, matching the vehicle's battery voltage. Typically, the lighter has a dedicated power line connected to it, separate from other circuits, and thus has its own fuse. The correct usage method involves inserting and removing the lighter vertically without shaking it, as frequent wiggling during removal can lead to loosening, short circuits, and damage to the fuse or external devices.
10
3
Share

How to start the Roewe RX5?

Use the key to enter the vehicle, allowing the vehicle to detect the key. This enables the car to start normally. Press the brake pedal and press the one-touch start button located in the center of the vehicle to start the engine. Check the vehicle's dashboard to ensure there are no fault warnings, confirming that the vehicle is operating normally. Any faults detected could affect the car's movement. Press the electronic parking brake button to release it, then shift gears to begin driving. The vehicle will now start and move normally.
5
1
Share

How to start a Kia car when the key fob battery is dead?

Place the key near the push-button start for a while. Touch the button with the key. The Kia K3 is a compact car under Dongfeng Yueda Kia, and the 2021 Kia K3 is equipped with a 1.4L turbocharged engine.
13
3
Share

How to Remove the Rear Seats of a Kia?

On both sides of the rear seat headrests, near the windows, there are handles. Pull these handles. The backrest of the rear seat can be folded forward. For the cushion part of the rear seat, in most cases, you simply push the cushion towards the rear of the car and then lift it upwards to remove it.
12
4
Share

How to fold down the rear seats of a Kia Forte?

Purchase a 12mm T-socket wrench. Locate the fixing screws in the gap between the seat and the backrest, and the screws between the backrest and the door frame, then remove them. Feel for a latch under the seat, hold the latch and lift the seat directly upwards to remove it. Lift the backrest slightly (the back of the backrest is hooked on), then remove it after disengaging.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.