···
Log in / Register

What Engine is Equipped in FAW Senya R9?

3 Answers
StAsher
09/03/25 2:37am
Senya R9 is equipped with a 1.2-liter turbocharged engine. Parameters of the 1.2-liter turbocharged engine: The maximum power of the 1.2-liter turbocharged engine is 105kw, and the maximum torque is 204nm. It can output the maximum power at 5500 rpm and the maximum torque between 1500 to 4200 rpm. This engine is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission. Maintenance methods for turbocharged engines: Let the engine idle for a few minutes before shutting it down after high-load operation. Regularly clean the air filter: The engine oil and filter must be kept clean to avoid impurities, which can degrade the performance of the lubricating oil and cause premature failure of the turbocharger. Regularly clean the turbocharger: The turbocharger operates continuously at high temperatures, and the lubricating oil lines are affected by the heat, causing some of the internal oil to coke, which can lead to insufficient lubrication and damage to the turbocharger.
Was this review help?
19
4
Share
StNicole
09/15/25 4:24am
I've been driving the FAW Senya R9 a lot lately. It's equipped with a 1.2-liter turbocharged gasoline engine producing 143 horsepower and 204 Nm of torque, making overtaking in the city particularly smooth and hill climbing effortless. The engine noise is minimal when driving, unlike older cars that rumble loudly, and it remains stable on highways without any drifting. The fuel consumption is impressive, with actual measurements showing around 6-7 liters per 100 kilometers, and a full tank can take you quite far. Routine maintenance is straightforward, requiring only regular oil changes, so there's no need for frequent trips to the repair shop. Compared to other small-displacement vehicles, this engine features a lightweight design, quick acceleration response, and offers more driving fun, making it perfectly suitable for weekend family outings.
Was this review help?
4
1
Share
Expand All
MacPaige
10/29/25 5:02am
I've been using the Senya R9 for a while now, and its 1.2T engine offers moderate power, making daily commutes quite comfortable. The fuel consumption is around 6.5 liters per 100 kilometers, saving a significant amount on fuel costs each month, which is quite economical. The engine delivers smooth power without any jerking during starts, and it remains stable at high speeds, even performing well in rainy or snowy conditions without slipping easily. In the car owner groups, maintenance is a frequent topic. The turbo system is quite durable, but it's recommended to check the filter every 5,000 kilometers. The car generally has a low failure rate, matching the reliability reputation of the FAW brand. Long drives are not tiring, and with the air conditioning on, the engine noise is minimal, not affecting driving concentration.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

What is the tire model of the Lynk & Co 03?

The Lynk & Co 03 has two tire models: 215/50R17 and 245/35R19. The first number, 205, represents the tire width of 205MM. 60 indicates that the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width. The letter R stands for radial tire, and 16 represents the rim diameter of 16 inches. The Lynk & Co 03 has a top speed of 210km/h, accelerates from 0 to 100km/h in 7.4 seconds, and has a fuel consumption of 6.2L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
19
2
Share

Diesel Vehicle Exhaust Pipe Cleaning?

High-cleanliness gasoline tends to form less carbon deposits, so the addition of gasoline cleaners must be done with caution, as substandard quality can lead to the opposite effect. Try to increase the shifting RPM for manual transmission vehicles and drive more on highways. The purpose of frequent highway driving is to utilize the scouring effect of airflow on the intake tract to prevent carbon deposit formation.
19
0
Share

What are the reasons for excessive pressure in the urea solution pump?

There are many reasons for excessive pressure in the urea solution pump. Severe external leakage at the upper part of the urea tank: After replacing the urea tank assembly, if the urea pump still exhibits faults, it is necessary to inspect the urea pump pipelines. Upon checking the urea tank water heating valve, it was found that the water valve was damaged and constantly open. Damage to the water heating valve: A damaged water heating valve can cause the coolant to continuously circulate and heat the urea tank, leading to excessively high temperatures inside the urea tank. This results in urea evaporation, which crystallizes around the urea tank after being discharged through the vent hole. Over time, excessive crystallization at the vent hole can block it. When the urea system operates, severe vacuum is created inside the tank, obstructing urea pressure buildup, thus triggering a fault indicating excessively low urea pressure.
9
5
Share

Is a Break-in Period Required After Replacing the Timing Chain?

Replacing the timing chain requires a break-in period. The role of the timing chain: The main function of the engine timing belt is to drive the engine's valve train, ensuring that the intake and exhaust valves open and close at the appropriate times to allow the engine cylinders to properly intake and exhaust air. In some models, such as the Volkswagen Jetta (EFI), Santana 2000, Bora, and Audi, the timing belt also drives the water pump. Advantages and disadvantages of the timing system: The timing belt has low noise, low transmission resistance, and low transmission inertia, which can improve the engine's power and acceleration performance, and is easy to replace. However, its downside is that it is prone to aging, has a high failure rate, and results in relatively higher maintenance costs for the owner. On the other hand, the advantages of the timing chain include a long service life, low failure rate, and reduced likelihood of vehicle breakdowns due to timing transmission failures. However, it also has some unavoidable drawbacks, such as high chain rotation noise, high transmission resistance, and high transmission inertia, which to some extent increase fuel consumption and reduce performance.
15
2
Share

What is the function of engine mounts?

The function of engine mounts is to eliminate resonance generated during engine operation and reduce hydraulic oil pressure. Method for replacing automobile engine mounts: Use a jack to support the engine; open the hood, remove the air filter cover and pipes; remove the filter base; take out the old engine mounts and replace them with new ones. Functions of engine mounts: Eliminate resonance generated during engine operation; reduce hydraulic oil pressure. Once the mounts are damaged, significant resonance will occur between the engine and the frame, causing the vehicle body to shake and produce various abnormal noises. Generally, automobile engine mounts should be replaced every 6 years, but they must be replaced immediately once damaged.
16
3
Share

Are Old Tires Toxic When Stored Indoors?

Old tires stored indoors can be toxic. Aging of waste tires accelerates, and during the aging process, they release irritating gases that can irritate the respiratory tract, potentially leading to respiratory diseases. They also tend to breed mosquitoes and insects, spread diseases, and are prone to causing fires. Methods for disposing of old tires: Tire retreading is a technology that repairs and processes worn or otherwise damaged tires to restore their usability. Tire lifespan: The wear life of a tire is between 30,000 to 50,000 kilometers. If a tire hasn't reached the wear limit or mileage but has been in use for 5 years or has developed numerous cracks on the sidewall, it should be replaced.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.