What engine does the Yuexiang V3 use?

1 Answers
PaisleeDella
07/28/25 6:06pm
The Yuexiang V3 is equipped with two engines: a 1.3-liter naturally aspirated engine and a 1.4-liter naturally aspirated engine. The 1.3-liter naturally aspirated engine delivers 94 horsepower and a maximum torque of 121 Nm, while the 1.4-liter naturally aspirated engine produces 101 horsepower and a maximum torque of 135 Nm. The Yuexiang V3 is an entry-level sedan launched by Changan Automobile, originally codenamed Changan B501. Its body dimensions are 4200mm in length, 1650mm in width, and 1465mm in height, with a wheelbase of 2410mm. Available body colors include Vibrant Red, Snow White, and Shining Deep Sea Blue.
Was this review help?
14
2
Share
More Forum Discussions

Are Zhuoa and Sinfoni the same?

Zhuoa and Sinfoni are the same car audio brand. Here is some relevant information about car audio: Introduction to car audio: Car audio (auto-audio) is a radio and playback device installed to alleviate the boredom of drivers and passengers during travel. The earliest version used was the car AM radio, later followed by AM/FM radios, tape players, and eventually CD players and digital audio compatible with DCC and DAT. Composition of car audio: Car audio mainly consists of three parts: the head unit, speakers, and amplifier. The head unit is the most important component in car audio.
12
4
Share

Where is the air intake of Suzuki UU located?

The air intake of Suzuki UU is located at the lower part of the engine. Below is a detailed introduction of the Suzuki UU: Power Performance: This model is equipped with a 125cc single-cylinder four-stroke engine. Its power and torque performance are average among models of the same class, with a maximum power of 6.9kw at 7500 rpm and a torque of 9.8Nm at 6000 rpm. The comprehensive fuel consumption per 100 kilometers is around 2.1-2.2 liters. Appearance Parameters: The overall length of this model is 1845mm, the width is 665mm, the height is 1095mm, the wheelbase is 1260mm, the seat height is 755mm, and the vehicle weight is 100kg.
9
3
Share

Why Can't the Interior Door Handle Open the Car Door?

The reasons why the interior door handle cannot open the car door include: the central lock is not unlocked, the child lock on certain doors is activated, the connecting rod of the interior handle has fallen off, the lock mechanism is damaged, or the door switch on the driver's side is not activated. Central lock not unlocked: Press the central lock switch on the driver's control panel to unlock it. Child lock on certain doors is activated: Open the door from the outside, check the side of the door for a child lock, and toggle the switch to deactivate it. Connecting rod of the interior handle has fallen off: Reattach it to restore normal function. Lock mechanism is damaged: If this issue occurs, opening the door will be very difficult or impossible. The solution is to replace the door limiter to ensure smooth operation. Driver's side door switch is not activated: For safety reasons, car doors automatically lock while driving. If there are no other issues, check if the driver's side switch is activated.
13
4
Share

What car model is the JLH-4G20TDB engine used in?

The Lynk & Co 05 is equipped with a 2.0T turbocharged engine model JLH4G20TD, which is essentially the same model as the T5 engine used in the Volvo XC60. Detailed specifications are as follows: Model: JLH4G20TD, Parameters: Maximum power 187kW (5500rpm), maximum horsepower 254Ps, maximum torque 350N•m (1800-4800rpm). Brief analysis of the JLH4G20TD engine: This engine features technologies such as centrally mounted high-pressure direct injection, secondary fuel injection, fully variable displacement oil pump, and DVVT variable valve timing. Both the cylinder head and block are made of aluminum alloy, reducing engine weight and improving fuel economy. Additionally, it uses a long-life timing belt, which not only reduces engine noise and enhances power but also improves fuel efficiency.
15
4
Share

What are the causes of the ix3 powertrain failure?

The causes of the failure include wiring issues, network problems, etc. Specific explanations are as follows: Computer response: The vehicle's computer cannot respond in time, and the program cannot run properly. Fuel pump damage: The fuel pump is damaged or the fuel pump sensor is damaged. Wiring issues: The ignition coil is damaged. The spark plug is damaged or has carbon buildup. The turbo wastegate may not be damaged, but the internal filter screen could be clogged. Component damage: The vacuum tube on the turbo wastegate is incorrectly connected. The relay in the right rear trunk fuse box is burnt out. The VANOS solenoid valve is damaged. The camshaft position sensor screw is loose or damaged.
2
2
Share

What is the reason for no response when kick-starting?

Possible reasons include insufficient battery voltage, blown fuse, etc. Specific causes are introduced as follows: Insufficient battery voltage: You can check the battery voltage with a voltmeter. If you frequently drive short distances at low speeds in the city for extended periods, the battery may discharge. The motorcycle battery serves as an auxiliary power source for the motorcycle, with its main functions being to assist in vehicle starting and store current, providing a certain voltage stabilization effect. If the battery is dead or the voltage is too low, it will undoubtedly affect the motorcycle's operation. Excessive spark plug gap or excessive carbon buildup: A faulty high-voltage cap connected to the spark plug can also cause the motorcycle to show no response when starting. Damaged starting fuse: This can lead to no response when starting, requiring motorcycle after-sales service for repair.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.