What engine does the Yuan EV use?

1 Answers
DiAbigail
07/30/25 1:59am
According to the official introduction from BYD Auto, the BYD Yuan EV New Energy is a pure electric compact SUV, so it is equipped with an electric motor and does not use a fuel engine. Here is some relevant information about the Yuan EV: 1. The Yuan EV New Energy uses a permanent magnet/synchronous electric motor, which comes in two versions: high power and low power. The high-power version of the Yuan EV New Energy has a maximum horsepower of 136 hp, a maximum power of 120 kW, and a maximum torque of 280 N·m; the low-power version has a maximum horsepower of 95 hp, a maximum power of 70 kW, and a maximum torque of 180 N·m. 2. The electric motor used in the Yuan EV New Energy adopts a front-mounted layout, which provides some space for the trunk. Its battery type is a ternary lithium battery, which has a relatively long lifespan and is less prone to failure. 3. According to BYD Auto's official introduction, the low-power version of the Yuan EV New Energy has a pure electric cruising range of 305 km, while the high-power version has a pure electric range of 410 km. 4. In terms of warranty, BYD Auto provides a six-year or 150,000-kilometer warranty for the entire vehicle of the Yuan EV New Energy and an eight-year or 150,000-kilometer warranty for the battery pack.
Was this review help?
7
0
Share
More Forum Discussions

Why Doesn't China 6 Affect Supercars?

The main reason why China 6 does not affect supercars is that the original Euro 5 standard was equivalent to China 5, and the implementation of China 6 initially only imposes restrictions on China 2 and China 3 vehicles. Below is relevant information about the China 6 standard: 1. Emission Standards: The emission standards have been raised by more than 30%, with nitrogen oxides reduced by 77%, particulate matter reduced by 67%, and the introduction of PN (particle number) limit requirements. Additionally, the emission durability and OBD-related requirements have been tightened, and vehicle emission testing requirements have been introduced to fundamentally ensure compliance with emission standards. Compared to the China 5 emission regulations, the China 6 standard adds real-world driving emission (RDE) testing requirements and limits. 2. Implementation: Since July 1, 2019, the China 6a standard has been implemented nationwide, with plans to fully replace the 6a standard with the 6b standard by 2023. The currently implemented China 6a standard can be seen as a transitional phase toward the actual China 6 standard. Some first-tier cities like Guangzhou skipped the 6a standard altogether and directly implemented the 6b standard from the beginning.
14
3
Share

What to Do If Your Driver's License Exceeds 12 Points?

After deducting 12 points from your driver's license, you must undergo a seven-day road safety regulations study and retake the subject one exam to have your license returned. Here are some tips to avoid point deductions while driving: 1. Obey the law: Drivers must comply with China's traffic regulations, avoid speeding, and never drink and drive. 2. Maintain sufficient safety awareness: Consciously observe surrounding vehicles, use hand signals appropriately, change lanes in advance, and stay away from large vehicles. 3. Avoid fatigue driving: Do not drive while fatigued; take breaks of about one hour during long trips.
6
3
Share

What does the MIC button in a car mean?

The MIC in a car stands for microphone. Here is some additional information: 1. Inside the car, the microphone is primarily used for Bluetooth call answering and navigation voice playback, among other functions. 2. The technical name for a microphone is actually a transducer, which is a device that converts sound signals into electrical signals. 3. Wireless microphones can generally be divided into three frequency bands: FM band, VHF band, and UHF band. (1) FM band: Since FM radios operate at frequencies between 88-108MHz, and FM band wireless microphones operate at frequencies above 108MHz, typically between 110-120MHz, FM radio signals do not interfere with FM band wireless microphones. This type of wireless microphone is simple in structure and low in cost, but the sound quality is relatively poor. (2) VHF band: The VHF band is commonly referred to as the V band, with frequencies between 180-280MHz. Due to the higher frequencies, it experiences less interference and uses crystal locking for stable reception performance. (3) UHF band: The UHF band is commonly referred to as the U band, with frequencies between 700-900MHz. At such high frequencies, there is almost no external interference. Additionally, U band devices often use surface-mount components, resulting in very stable performance and good sound quality.
17
5
Share

What are the differences between 92, 95, and 98 gasoline?

Here are the specific differences between 92, 95, and 98 gasoline: 1. Octane rating: 92 gasoline contains 92% isooctane and 8% n-heptane; 95 gasoline contains 95% isooctane and 5% n-heptane. 98 gasoline is a mixture of 98% isooctane and 2% n-heptane. 2. Anti-knock combustion capability: The gasoline grade represents the fuel's anti-knock performance. The higher the grade, the better the anti-knock performance. 92 gasoline has poor anti-knock combustion capability; 95 gasoline has average anti-knock combustion capability; 98 gasoline has higher anti-knock performance and power.
4
4
Share

What does DPF regeneration mean?

When a certain value is reached, it will lead to a decline in engine performance such as power and fuel economy. The following are the methods of DPF regeneration: 1. Regeneration method one: Monitor the exhaust back pressure through a differential pressure sensor. When the back pressure rises to a certain value, the captured particles are burned into CO2 and discharged. 3. Regeneration method three: Use electric heating in the particulate filter to create high temperature, burning the captured particles into CO2 and discharging them. 4. Regeneration method four: Add additives to the fuel to lower the combustion temperature of particles, allowing the captured particles to burn into CO2 and be discharged at a lower temperature.
10
4
Share

Can the National V diesel engine be tuned for more horsepower?

National V diesel engines can indeed be tuned for increased horsepower. Below is relevant information about diesel: 1. Introduction: Diesel is a light petroleum product, a complex mixture of hydrocarbons (carbon atoms approximately 10-22). It serves as fuel for diesel engines. Primarily produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking, diesel fractions are blended. It can also be obtained from shale oil processing and coal liquefaction. Diesel is categorized into light diesel (boiling point range approximately 180-370°C) and heavy diesel (boiling point range approximately 350-410°C). It is widely used in large vehicles, railway locomotives, and ships. The most important application of diesel is in diesel engines for vehicles and ships. 2. Differences from gasoline: Compared to gasoline, diesel has higher energy density and lower fuel consumption rate. Due to its low energy consumption, some small cars and even high-performance vehicles have switched to diesel.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.