What engine does the Yeti use?

1 Answers
KeeganRose
07/29/25 11:29pm
The Yeti is equipped with three engine options: a 1.4-liter turbocharged engine, a 1.8-liter turbocharged engine, and a 1.6-liter naturally aspirated engine. The 1.4-liter variant delivers a maximum horsepower of 150 hp, the 1.8-liter variant offers 160 hp, and the 1.6-liter variant provides 110 hp. The Yeti is a compact SUV produced by SAIC Skoda, with body dimensions of 4275mm in length, 1793mm in width, and 1682mm in height, and a wheelbase of 2638mm. In terms of exterior design, the Yeti features more straightforward lines, a robust and reliable wide front end, and a central skid plate under the front bumper that enhances the overall visual appeal. Equipped with a 4-cylinder turbocharged engine, it delivers strong acceleration, especially at medium speeds, and boasts excellent noise reduction design inside the cabin, ensuring minimal noise.
Was this review help?
19
0
Share
More Forum Discussions

Which side are cylinders 1 and 2 on the Subaru Forester?

Subaru Forester cylinders 1 and 2 are on the battery side. Standing in front of the vehicle, facing the engine, cylinders 4 and 3 are on the right side inside, while cylinders 2 and 1 are adjacent to the battery. In fact, the cylinder block is marked with 1, 2, 3, and 4, but these markings are obscured by the intake manifold. Look carefully on the cylinder block for the 1234 markings. Below is an introduction to the Subaru Forester: 1. Positioning: The Subaru Forester is a hybrid SUV designed for both urban and off-road family use. The safety of the driver and passengers is of course not to be overlooked, and Subaru has done extensive work in this area. 2. Safety: The car frame plays the most significant role in vehicle safety. Subaru has developed a new generation of high-strength ring-shaped frames. The cabin is specially reinforced, from the roof to the doors and pillars, as well as the floor, all of which are reinforced with specialized support frames that can absorb impacts and vibrations from all directions, ensuring cabin safety. The front of the car is most likely to be impacted and often suffers severe damage. The main frame is designed to be collapsible, absorbing energy during impacts.
8
5
Share

Why is the 7th Generation Honda Accord Considered a Classic?

The 7th generation Honda Accord (Accord) is considered a classic in terms of appearance, quality, and reputation. Since its market debut in 2003, 18 years have passed, yet the 7th generation Accord has maintained excellent resale value in the market. Below is an extended introduction: 1. Powertrain: The 2.0L 4-cylinder model delivers 156ps at 6,300rpm and 19.34kgm of torque at 4,300rpm, paired with a 5-speed transmission. The 2.4L version of the Accord7 offers 180ps at 6,500rpm and 22.74kgm of torque at 4,300rpm, with an upgraded 5-speed transmission. 2. Exterior Design: The Accord7's exterior leans towards a bold and dynamic style, featuring sharp, rear-slanting headlights and a pronounced waistline that conveys a sense of forward motion, elements that are relatively rare for the Accord series, giving it a sporty character. However, catering to the mainstream preferences of domestic mid-to-large sedan buyers, the new Accord7 underwent deep refinements to enhance its luxurious appeal. For instance, the front grille of the Accord7 adopts a sleek, single wide chrome strip for a refined look.
12
2
Share

What Causes the Front Wheels to Make Abnormal Noises When Driving Over Speed Bumps?

When a car makes a clunking noise while driving over speed bumps, it is usually caused by a loose stabilizer bar or a faulty shock absorber. Generally, shock absorbers themselves rarely produce abnormal noises. However, noises can occur if the shock absorber fails, deteriorates, has loose or detached internal components, has a loose rubber bushing on the mounting ring, or lacks oil or leaks oil. It is recommended to promptly inspect and repair the vehicle when such noises occur. Below is some related information about speed bumps: 1. Speed bumps, also known as speed humps, are traffic installations placed on roads to slow down passing vehicles. They are typically strip-shaped, though some are dot-shaped, and are primarily made of rubber, though some are metal. They are usually painted in alternating yellow and black colors to attract visual attention, with a slight elevation on the road surface to force vehicles to slow down. 2. Speed bumps are commonly installed in areas where vehicles need to reduce speed, such as road intersections, industrial and mining zones, schools, residential entrances, and accident-prone sections. They are a specialized traffic safety measure designed to reduce the speed of both motorized and non-motorized vehicles.
10
1
Share

Why is the BMW X3 engine noise loud?

BMW X3 engine noise loud reasons are as follows: 1. Engine reason: The four-cylinder engine uses an N20 engine fuel injector and has an additional high-pressure pump inside the cylinder block, resulting in louder noise. 2. Installed valve: One of the BMW's dual exhaust pipes is equipped with a valve that does not open at low speeds, so the idle speed is high at startup, causing loud noise. This is a normal phenomenon, and the noise will decrease after a dozen seconds. Relevant information about the BMW X3 is as follows: 1. Power aspect: There are three power options available for the 2.0T engine - low, standard, and high. The low power is called 25i, the standard power is 28i, and the high power is 30i. The transmission is uniformly 8AT, and the four-wheel drive system is standard across the entire series. 2. Chassis structure: It features a front double-ball-joint shock absorber suspension and a rear multi-link independent suspension, equipped with an intelligent four-wheel drive system. The central differential is a multi-plate clutch type, adopting a unibody structure.
14
1
Share

Where is the cabin air filter located on a Ford Transit?

The factory Ford Transit does not come with a cabin air filter installed. The reserved installation position for the cabin air filter is at the air conditioning outlet under the front hood of the vehicle. The benefits of installing a cabin air filter are as follows: 1. It ensures the filter fits tightly against the housing. 2. It prevents unfiltered air from entering the cabin. 3. It separates solid impurities such as dust, pollen, and grinding particles from the air. Below is an introduction to the dimensions of the Ford Transit: 1. In terms of transmission: The Ford Transit offers a choice between a 5-speed manual and a 6-speed automatic transmission. 2. In terms of power: The Ford Transit is equipped with a 2.0-liter turbocharged engine, available in both diesel and gasoline versions. 3. Diesel version: Maximum horsepower of 121 hp, maximum power of 89 kW, maximum torque of 300 N·m, and a top speed of 156 km/h. 4. Gasoline version: Maximum horsepower of 202 hp, maximum power of 148.5 kW, maximum torque of 300 N·m, and a top speed of 156 km/h. 5. In terms of body structure: The Ford Transit offers two structures to choose from, a box-type transport vehicle and a multi-purpose commercial vehicle, catering to the needs of different consumer groups.
7
5
Share

Where is the folding button for the Envision's side mirrors?

The BMW 3 Series requires approximately 5.5 liters of engine oil. The specific amount can be checked via the electronic oil dipstick, and the recommended oil grade for the BMW 3 Series is 5W30. Information about engine oil is as follows: 1. Engine oil: (Engine-oil) is the lubricant used by the engine. 2. Composition: It consists of base oil and additives. The performance characteristics of engine oil include: 1. Lubricity: Under various conditions, the ability of engine oil to reduce friction, minimize wear, and prevent metal sintering is referred to as the lubricity of engine oil. The viscosity of engine oil is an important indicator for evaluating lubricity. 2. Low-temperature operability: The performance of engine oil that ensures the engine starts easily and reliably supplies oil under low-temperature conditions is called the low-temperature operability of engine oil. The low-temperature operability of engine oil includes facilitating cold starts and reducing start-up wear. 3. Viscosity-temperature characteristics: The property of lubricating oil to change viscosity with temperature fluctuations is called viscosity-temperature characteristics. Good viscosity-temperature characteristics mean that the oil's viscosity changes minimally with temperature. The effect of temperature on oil viscosity: as temperature increases, viscosity decreases; as temperature decreases, viscosity increases.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.