What engine does the Volvo S40 have?

1 Answers
Elizabeth
07/30/25 8:21am
Volvo S40 is equipped with a 2.0L naturally aspirated engine, with a maximum power of 103kw and a peak torque of 185nm, paired with a 6-speed dual-clutch transmission. An engine is a machine that converts other forms of energy into mechanical energy, originating in the UK. It can refer to either the power generation device or the entire machine including the power unit. The Volvo S40 is a model under the Volvo brand, with body dimensions of 4676mm in length, 1770mm in width, and 1454mm in height, and a wheelbase of 2640mm. In terms of interior, the Volvo S40 is simple yet elegant, with a decorative style full of charm and harmonious colors, where different colors create different styles.
Was this review help?
16
3
Share
More Forum Discussions

What is the tire size of the Nissan NV200?

The Nissan NV200 is equipped with Hankook tires across all models, with a tire size of 165R14C. The Nissan NV200 is a commercial vehicle based on a sedan platform, available in three variants: a 5-seat commercial version with two rows of seats, a 7-seat commercial version with three rows of seats, and a 7-seat passenger version with three rows of seats. Below are details about the vehicle: 1. The Nissan NV200 has body dimensions of 4400 mm in length, 1695 mm in width, and 1847 mm in height, with a wheelbase of 2725 mm. 2. The Nissan NV200's 1.6-liter naturally aspirated engine produces 124 horsepower and a maximum torque of 153 Nm. This engine reaches its maximum power at 5600 rpm and its maximum torque at 4000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The 1.6-liter naturally aspirated engine is paired with either a 5-speed manual transmission or a CVT transmission.
8
4
Share

Where is the USB port of Baojun 730 located?

The USB port of Baojun 730 is located in the storage compartment under the center console. You can see it by opening the cover. Here is some information about the USB port: 1. The car USB port can be used to read USB drive information for the car entertainment system, charge mobile phones, etc. After inserting the USB drive into the USB port, you can play the songs in the USB drive by opening the music player in the car entertainment system. 2. Besides the USB port, the cigarette lighter can also be used to charge mobile phones, but a power converter is needed. Precautions for using the car charger: 1. Do not use the car charger in a humid environment. 2. Do not store the car charger in a humid environment. 3. The suitable temperature for use is 0-45℃. 4. Keep it away from children. 5. Avoid lightning strikes. 6. Unplug the charger in time after charging.
3
5
Share

How to Adjust the Time in a Verna Car?

Here are the steps to adjust the time in a Verna car: 1. Turn the key to the ACC position and hold the CLOCK button for a few seconds. 2. Enter the time adjustment mode and rotate the knob on the right. 3. After adjusting the hour, press the knob on the right once to proceed to minute adjustment. 4. Once adjusted, press the knob on the right again to complete the process. Additional Information: The Verna features smooth, flowing lines in its design, with a style that leans towards fashion, targeting young consumers. The inverted trapezoidal grille paired with sleek, diamond-shaped headlights enhances its modern appeal. The rear of the vehicle adopts a continuous taillight design, emphasizing the lines and contours. Overall, its exterior is more distinctive and exudes a stronger sporty vibe.
19
2
Share

How to Break in a New Volkswagen Tiguan L?

The following are methods for breaking in a new Volkswagen Tiguan L: 1. Warm up before starting: For fuel-injected cars, before starting, turn the key to the second position and wait for 5-10 seconds before ignition. This is because once the ignition is turned on, the fuel pump begins working to adjust oil pressure and fuel injection volume. Therefore, waiting a few seconds before starting helps protect the new engine. 2. Avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 3. Avoid overloading: If a new car is driven at full load during the break-in period, it can cause damage to mechanical components. Therefore, within the first 1000 kilometers, domestic cars should not exceed 75%-80% of the rated load capacity. Extension: The break-in period for a new Volkswagen Tiguan L refers to the initial driving distance after the car leaves the factory, during which the engine components are smoothed out. The break-in mileage for a new car is generally between 1000 kilometers and 3000 kilometers.
2
5
Share

How to Turn On the Outlander's Headlights?

Here are the methods to turn on the Outlander's headlights: 1. The headlight switch is generally integrated into the lever-type switch on the left side of the steering wheel, although there are exceptions—some models feature a rotary knob switch. Simply turn or toggle the switch to the designated position, and the corresponding exterior lights will illuminate, with the corresponding indicator appearing on the instrument panel. 2. The high beams are typically activated by pushing the lever forward or inward. Pushing it forward turns the high beams on continuously. When using high beams, it is essential to turn them off when encountering oncoming traffic and only reactivate them after passing the other vehicle. This prevents your high beams from dazzling the other driver's vision and causing accidents, which is also a standard of courteous driving.
8
5
Share

What brand are the brakes on the Cadillac CT6?

The Cadillac CT6 uses TRW brake pads. The brake pads on the Cadillac CT6 can normally last for over 30,000 kilometers, with no fixed replacement interval. Cadillac CT6 brake pad replacement tutorial: 1. Connect the computer to the vehicle, locate the "Brake Pad Replacement Setting" and open the rear wheel brake caliper. Wait for five seconds until a sound indicates that the caliper has disengaged, meaning the brake motor has retracted. Be sure to open the brake fluid reservoir cap because brake fluid will flow back as the caliper retracts. 2. Then loosen the two nuts on the cover. If the caliper has not fully retracted, use a flathead screwdriver to pry it open slightly. 3. Open the outer cover of the brake caliper to install the new brake pads. The side with the text label should face outward, while the side without the production text label should face inward. 4. After installing the new brake pads, select "Close Rear Wheel Brake Caliper" in the settings. The brake motor will reset and extend in about 5 seconds.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.