What engine does the Volkswagen Sagitar have?

1 Answers
AlinaRose
07/29/25 4:12pm
The engine of the Volkswagen Sagitar is developed by the Volkswagen Group and produced by FAW-Volkswagen Engine (Chengdu) Co., Ltd. The 1.2T version of the Volkswagen Sagitar has an engine model EA211-DLS, with a maximum power of 85kw, maximum torque of 175 Nm, and maximum horsepower of 116. The 1.4T version has an engine model EA211-DJS, with a maximum power of 110kw, maximum torque of 250 Nm, and maximum horsepower of 150. For daily maintenance of the Volkswagen Sagitar's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
13
5
Share
More Forum Discussions

What are the classifications of electric vehicle batteries?

Electric vehicle batteries are classified into storage batteries and fuel cells. Storage batteries are suitable for pure electric vehicles, including lead-acid batteries, nickel-metal hydride batteries, sodium-sulfur batteries, secondary lithium batteries, air batteries, and ternary lithium batteries. Fuel cells are used for fuel cell electric vehicles, including alkaline fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, solid oxide fuel cells, proton exchange membrane fuel cells, and direct methanol fuel cells. The performance parameters of electric vehicle batteries are: 1. Electromotive force: Also known as the standard voltage or theoretical voltage of the battery, it is the potential difference between the positive and negative poles when the battery is open-circuited; 2. Rated voltage: Refers to the recognized standard voltage of the electrochemical system when the battery is operating; 3. Open-circuit voltage: The battery voltage under no-load conditions.
14
0
Share

Can the car start after water enters the exhaust pipe?

Water entering the exhaust pipe can prevent the car from starting. After the car has driven through water: If water enters the exhaust pipe and the engine stalls, do not attempt to restart it forcefully. Instead, immediately call for roadside assistance and wait for help. If the water intake in the exhaust pipe is not severe: You can inspect the electronic systems yourself and remove any accumulated water under the car body. Then, remove the spark plugs to drain some water from the engine before reinstalling them. This process allows the engine to start and prevents stalling. If the car has been severely submerged in water: Roadside assistance is required to tow the vehicle to a repair shop. If water has entered the exhaust pipe, a simple cleaning and drying process is necessary before the engine can function properly again.
13
0
Share

How long after the car is turned off can the car cover be put on?

You can put on the car cover about 5 to 10 minutes after the car is turned off, which will not harm the car or the cover. The car cover, commonly known as car clothing, is an outer cover made of canvas or other flexible and wear-resistant materials according to the car's dimensions. It is a protective accessory for cars, consisting of the cover body, buckles, and spring hooks. Its functions include: 1. Protecting the car paint and window glass from dirt, dust, water, rain, and snow; 2. Resisting UV damage to the car paint, interior, and tires; 3. Providing insulation to prevent excessive heat inside the car in summer; 4. Preventing scratches on the car paint by pedestrians or children, thereby extending the lifespan of the car paint.
12
3
Share

What Are the Causes of Car Water Pump Leakage?

Car water pump leakage is caused by: 1. The water seal seat ring assembly was not installed properly during the installation of the water pump; 2. The machine is old, and the internal components of the water seal are worn, corroded, and aged, leading to failure; 3. The harsh working environment of construction machinery causes uneven wear of the bakelite sealing gasket and the bushing end face; 4. The spring is soaked in water for a long time, leading to rust and reduced elasticity; 5. The condensation of water vapor in the cooling system forms ice, causing the water pump body to crack due to freezing. The maintenance methods for car water pumps are: 1. Regularly check the sealing components to prevent internal water ingress, which can cause motor short circuits and burnout; 2. Replace the lubricating oil at scheduled intervals; 3. Perform regular rust removal.
7
0
Share

How much current is needed to start a car?

Starting a car requires 100 to 300 amps of current, and the larger the engine displacement, the greater the starting current. Starting current refers to the minimum current obtainable under specific conditions at -17.8°C and -28.9°C, which can relate the battery's starting capability to variables such as engine displacement, compression ratio, temperature, starting time, the technical condition of the engine and electrical system, and the lower operating voltage for starting and ignition. The working principle of starting current is as follows: at the moment the motor is energized, the rotor speed is 0, and the synchronous rotating magnetic field cuts the rotor windings at a high speed, inducing a high electromotive force in the rotor windings and generating a large current. This current counteracts the magnetic flux of the stator field, and to maintain the original magnetic flux compatible with the power supply voltage, the stator winding automatically increases its current, thereby increasing the stator current of the motor.
19
4
Share

Is Shanghai Volkswagen Skoda a domestic or joint venture brand?

Shanghai Volkswagen Skoda is a joint venture brand, a subsidiary under the Volkswagen Group, and one of Volkswagen's classic brands. As one of the world's oldest car manufacturers with a long history, Skoda is now a sub-brand under Volkswagen. Skoda has a rich history and is a century-old car manufacturer. Its domestic joint venture partner is SAIC Volkswagen. The 2018 Skoda Octavia sedan has body dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, with a wheelbase of 2686mm. This model is equipped with 1.5L, 1.2T, and 1.4T engines.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.