What engine does the Vezel use?

1 Answers
ElainaMarie
07/24/25 8:46pm
Honda Vezel is equipped with a 1.5L direct-injection naturally aspirated engine codenamed L15B and a 1.8L naturally aspirated engine codenamed R18ZA. Below is detailed information about the Vezel's engines: 1. This Honda Vezel engine is used in the Japanese-spec third-generation Fit 1.5L gasoline-powered models and the Japanese-spec first-generation VEZEL gasoline-powered models. It is also the version with the highest power peak in the L15B series, delivering a maximum power of 132ps/6600rpm and a maximum torque of 155Nm/4800rpm. The minimum fuel requirement is 95RON gasoline. 2. The L15B2 engine is used in the Chinese-spec third-generation Fit produced by GAC Honda. It is also equipped in the first-generation VEZEL produced by GAC Honda, the Chinese version's 1.5L model, and the 1.5L versions of the VEZEL's sister models produced by Dongfeng Honda.
Was this review help?
10
0
Share
More Forum Discussions

Is a Water-Submerged Car Considered Totaled?

Automobiles submerged in water are not necessarily considered totaled. Generally, water-damaged vehicles are categorized into three different levels: If the water level exceeds the car's chassis, it is referred to as a water-immersed vehicle; if the water level surpasses the oil dipstick, it can be termed a semi-submerged vehicle; and if the water level has gone beyond the engine hood or the dashboard panel, then it is called a fully submerged vehicle. Here are the recommended actions for a water-submerged car: 1. Do not attempt to start the vehicle after it has been submerged in water; 2. Call for a rescue tow truck and inform your insurance company of the repair shop location where the car will be taken, so that the claims adjuster can assess the damage; 3. While waiting for rescue, if conditions permit, disconnect the vehicle's power, shift into neutral, and push the car to a safe location.
7
3
Share

What are the new regulations for mopeds in Shanghai?

In the Shanghai area, the mopeds allowed to operate are two-wheeled mopeds. The driver's license category for these vehicles is F. Applicants must be between 18 and 70 years old, meet the physical conditions required for a driver's license, and must not have any disqualifying circumstances. Below is a detailed introduction to the new regulations for mopeds in Shanghai: 1. Application locations for mopeds: Since moped management is divided into urban and suburban categories, residents whose household registration is in the nine districts of Pudong New Area, Baoshan, Jiading, Minhang, Songjiang, Jinshan, Qingpu, Fengxian, and Chongming must apply for a moped driver's license at the driver management window of the traffic police detachment in their household registration location. Residents whose household registration is outside these suburban areas can apply in non-suburban areas, and cross-district applications are supported. 2. Other information: Mopeds are a type of motorcycle and must meet various technical standards and legal requirements for motor vehicles. Their maximum design speed, displacement, or total motor power are lower than those of regular motorcycles. Their technical parameters and performance are between electric bicycles and motorcycles, and they are a type of motorcycle that can be driven by individuals under 70 years old.
4
1
Share

Can Water-Damaged Leather Seats Be Restored?

Generally, water-damaged leather seats can be restored. Since genuine leather has certain waterproof properties, if the surface shows no signs of swelling or loosening, simple treatment followed by air drying can restore them. However, if the seats have been soaked for an extended period with severe water saturation, leading to swelling and loosening of the leather, professional restoration at an auto detailing center may be required. After leather seats are soaked in water, use a damp cloth with neutral or alkaline cleaning products to gently wipe the seat surface and remove any stains. For stubborn stains, slightly increase the proportion of cleaner. After cleaning, use a soft towel to dry the surface moisture and allow the seats to air dry naturally. During the drying process, avoid using a hair dryer for quick drying or exposing the seats to direct sunlight, as this can damage the leather. Leather seat maintenance tips: Regularly clean leather seats using neutral or alkaline cleaning products, and avoid chemical cleaners with unknown ingredients to prevent leather corrosion. It's best to park the car indoors to minimize sun exposure and prevent the leather from drying out and cracking.
1
5
Share

What maintenance is required for a vehicle after driving 20,000 kilometers?

At 20,000 kilometers, the main maintenance items for a vehicle are: 1. Oil change. 2. Air filter replacement. 3. Cabin air filter and oil filter replacement. 4. Replacement of wear-and-tear parts and fluids such as power steering fluid, along with checking the remaining lifespan of components. Below are relevant details: The wear-and-tear parts of a vehicle include brake pads, tires, wiper blades, brake rotors, various filters, spark plugs, ignition coils, etc. The vehicle's fluids include engine oil, transmission fluid, coolant, brake fluid, and power steering fluid. 1. During vehicle maintenance, the primary focus is on replacing wear-and-tear parts and fluids. The wear-and-tear parts include brake pads, tires, wiper blades, brake rotors, various filters, spark plugs, ignition coils, etc. The vehicle's fluids include engine oil, transmission fluid, coolant, brake fluid, and power steering fluid. 2. Check the moisture content of the brake fluid. Since brake fluid is highly hygroscopic, if the moisture content exceeds 3%, it must be replaced immediately. 3. The remaining lifespan of wear-and-tear parts should also be checked. Especially tires, which are rubber products. Over time, tires will age and typically need replacement every four years. For frequent drivers, it is recommended to shorten the tire replacement cycle.
8
0
Share

How Many Months Should You Not Exceed When Buying Tires?

New tires should not be purchased if they have been in storage for more than three years after production. According to the domestic trade industry standard "Technical Specifications for Tire Claims," the claim period (including unused tires and those under normal use) is calculated from the production date of the tire, with a three-year period being the valid claim duration. The domestic trade industry standard "Specifications for Tire Marketing Management" further stipulates that tire dealers should not sell tires that are not eligible for claims. Below is relevant information: Specific reasons: The aging of rubber products like tires leads to significant changes in their physical properties, such as tensile strength, hardness, and wear resistance. The aforementioned industry standards are linked to the general lifespan limits of tires, reflecting the common consensus in the tire distribution industry regarding quality control. Additional information: Every tire has a production date, and it is important to be aware of your tire's usage period and mileage. Exceeding this period or mileage can result in severe tire wear, potentially compromising their ability to perform adequately. Therefore, it is crucial to keep track of your vehicle's tire production dates to avoid potential issues.
15
4
Share

What is the actual height of a 2-meter height limit on highways?

Highway height limits of 2 meters are actually a safe passage height, with the actual height being approximately 2.2 meters. Therefore, slightly taller vehicles may barely pass, but this is not recommended as getting caught by traffic cameras will result in fines and penalty points. Typically, small balls are hung on height-limiting gantries as a safety warning—if a vehicle touches these balls, it cannot pass. The purpose of setting up height-limiting structures is often due to bridges, tunnels, or culverts ahead on the road. Below is relevant information about height limits: 1. Purpose: Most height-limiting structures are installed on roads beneath bridges and in front of tunnels, primarily to protect the bridges and tunnels while also serving as a warning to passing vehicles. 2. Standards: The standards for setting road height limits are not uniform. Generally, the clearance height for height-limiting structures on first- and second-class highways should be 5 meters, while for third- and fourth-class highways, it should be 4.5 meters. The original intention of setting height limits is to ensure the safety of drivers and structures.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.