···
Log in / Register

What engine does the Toyota 86 use?

4 Answers
VanRose
07/29/25 1:04pm
The Toyota 86 is equipped with a naturally aspirated engine with the model code FA20. This engine was jointly developed by Toyota and Subaru. Naturally aspirated engines are the original type of engines, offering relatively lower costs in later maintenance and upkeep, and are less prone to malfunctions. The Toyota 86 has body dimensions of 4240mm in length, 1775mm in width, and 1285mm in height, with a wheelbase of 2570mm. It features a distinct short-body, short-wheelbase design centered around driving dynamics. Such body dimensions and proportions help the Toyota 86 achieve an optimal weight distribution, thereby maintaining its crucial handling characteristics.
Was this review help?
15
1
Share
OLorenzo
08/14/25 2:25am
The Toyota 86 is equipped with the FA20 engine, a 2.0-liter horizontally opposed four-cylinder engine with a naturally aspirated design, delivering around 200 horsepower. Its low center of gravity layout enhances the car's agility in steering, providing direct acceleration feel, making it suitable for mountain road drifting or urban commuting. The engine noise is not excessive, and the sound at high RPMs is quite sporty. Having driven it a few times, I found the throttle response quick, but low-speed torque is average, requiring higher RPMs to deliver power. For maintenance, it's recommended to change the oil every 5,000 kilometers using full synthetic oil, and inspect the spark plugs every 20,000 kilometers to effectively extend their lifespan. This engine was jointly developed by Toyota and Subaru, similar to the heart of the BRZ, balancing performance and fuel efficiency, with urban fuel consumption around 8-9 liters per 100 kilometers. For frequent long-distance driving, it's advisable to check the cooling system to prevent overheating issues.
Was this review help?
5
2
Share
Expand All
IsabelAnn
08/14/25 2:27am
The Toyota 86 is equipped with the FA20 engine, a horizontally opposed four-cylinder power unit. With a displacement of 2.0 liters, this engine is optimized based on Subaru technology and delivers approximately 200 horsepower. The lower center of gravity enhances stability, making the car less prone to skidding during turns. In practical driving, the acceleration is smooth from a standstill, though it feels slightly underpowered when climbing hills. I recall that in cold regions, it requires a bit more time to warm up; otherwise, the fuel system might not function optimally. Maintenance should not be neglected—regularly replacing the air filter and engine oil can reduce wear. The engine offers considerable modification potential, such as upgrading the intake and exhaust systems to boost power. However, beginners are advised against tampering with the ECU to avoid damaging the circuitry. Overall, it's a reliable and excellent choice, well-suited for daily driving.
Was this review help?
17
2
Share
Expand All
McIker
10/09/25 7:33am
The Toyota 86 is equipped with an FA20 engine, a 2.0-liter horizontally opposed four-cylinder. It delivers nearly 200 horsepower and substantial torque. The engine sound is exhilarating when driving, and it performs exceptionally well at high RPMs. The low center of gravity design reduces the body height, enhancing handling precision. The downside is its weak low-end torque, requiring deeper throttle input. Don't forget the oil change intervals for maintenance.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

What Causes a Car to Feel Bumpy on Smooth Roads?

Car feels bumpy on smooth roads due to: 1. Corrosion or aging of the stabilizer bar bushings; 2. Damaged brake pads; 3. Malfunction in the connection between the suspension and shock absorbers; 4. Abnormal noise from wheel bearings; 5. Deformation of shock absorber springs; 6. Aging or wear of shock absorber pressure bearings. Solutions for a bumpy car on smooth roads include: 1. Clean the fuel system and check the idle speed motor for carbon buildup, clean promptly; 2. Check oil pressure and replace faulty components; 3. Replace brake discs in time; 4. Inspect or replace spark plugs; 5. Check the engine to identify problematic parts; 6. Clean the fuel filter.
1
5
Share

What is the working principle of an exhaust gas turbocharging system?

The working principle of an exhaust gas turbocharging system is to increase the intake air volume by compressing air, utilizing the inertial impulse of the exhaust gas discharged from the engine to drive the turbine in the turbine chamber. The turbine drives the coaxial impeller, which compresses the air delivered from the air filter pipe, pressurizing it into the cylinder. The maintenance methods for an exhaust gas turbocharging system are: 1. After starting the car engine, do not abruptly press the accelerator pedal; 2. Do not immediately turn off the engine after prolonged high-speed operation; 3. Choose the appropriate engine oil; 4. Regularly clean the engine oil and filter; 5. Clean the air filter on time; 6. Periodically check the sealing rings of the turbocharger; 7. Regularly clean the air filter; 8. Periodically inspect the lubrication oil pipes and joints.
9
2
Share

What are the steps to replace the battery in a Ford Mustang key?

The steps to replace the battery in a Ford Mustang key are: 1. There is a button on the back of the key. Press and hold the button to pull out the mechanical key inside; 2. After pulling out the mechanical key, you can see a small black switch. Press the switch to remove the old battery; 3. Take out the old battery and replace it with a new one. Taking the 2019 Mustang as an example, its front suspension is a MacPherson independent suspension, the rear suspension is a multi-link independent suspension, the body dimensions are: length 4555mm, width 1835mm, height 1715mm, wheelbase 2665mm, fuel tank capacity 60l, and curb weight 1545kg.
6
2
Share

Which country does Ferrari originate from?

Ferrari originates from Italy and is a manufacturer of world-class racing and sports cars, primarily producing Formula One racing cars, racing vehicles, and high-performance sports cars. Models under the Ferrari brand include: Ferrari 488, Ferrari 812, Ferrari 458, Ferrari LaFerrari, Ferrari F8, etc. Taking the 2020 Ferrari 812 as an example, its body structure is a two-door, two-seater hardtop convertible, with body dimensions of: length 4693mm, width 1971mm, height 1276mm, a wheelbase of 2720mm, a fuel tank capacity of 92 liters, and a luggage compartment capacity of 210 liters.
4
4
Share

How to remotely start the LaCrosse?

To remotely start the LaCrosse, follow these steps: 1. Press the lock button on the car key; 2. Hold down the 'C' button on the car key, and the car will automatically start. Remote start refers to starting the engine remotely using the key fob. When using this feature, owners should note the following: 1. The vehicle must be within a 50-meter range for the remote start to work; 2. After the vehicle is remotely started, it is advisable to open the door and wait a moment to allow stale air to circulate out. Taking the 2021 LaCrosse as an example, it is a mid-size sedan with the following dimensions: length 5026mm, width 1866mm, height 1459mm, wheelbase 2905mm, fuel tank capacity 55l, and curb weight 1535kg.
1
2
Share

What does Hill Descent Control (HDC) mean in cars?

Hill Descent Control (HDC) refers to a slope control system, which is an automatic control system designed for downhill driving. Its primary function is to maintain a low speed and ensure tire traction on steep downhill roads, allowing the vehicle to safely descend to level ground. When the HDC function is activated, it enables the driver to focus solely on steering without needing to press the brake pedal, ensuring a smooth descent on steep slopes. To use the HDC system: Before descending a steep slope, turn on the HDC switch. Then, release the accelerator and brake pedals, and the HDC system will automatically engage. The system will immediately deactivate if the brake or accelerator pedal is pressed.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.