What engine does the SWM G05 use?

[McConnor]

SWM G05 uses a 2.0L naturally aspirated engine and a 1.5T turbocharged engine. The engine models are SWD15T and SWE20 respectively. The 2.0L engine has a maximum power of 105kw and a maximum torque of 190nm; the 1.5T engine has a maximum power of 115kw and a maximum torque of 230nm. The engine of SWM G05 is domestically produced. The SWM brand was founded in Italy in 1971 and was fully acquired by XinYuan Holdings in 2014. The engine of SWM G05 can be maintained daily using the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and the usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The oil quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which will cause various problems to the engine. To avoid failures, the oil should be changed regularly according to the usage conditions, and the oil quantity should be moderate. When the engine oil passes through the fine holes of the filter, the solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, allowing the oil to pass through the bypass valve and still bring the dirt back to the lubrication part, accelerating engine wear and internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with the metal powder produced by part wear to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale can not only ensure the normal operation of the engine but also extend the overall life of the radiator and the engine.