What engine does the Sharan use?

What does it mean when Skoda detects a pressure loss?

Detecting tire pressure loss means that a certain tire is underinflated. Here are the relevant explanations: 1. Underinflation: Tires are a very important component of a car. If the tire pressure is insufficient, it should be inflated immediately. When the tire pressure is too low, the increased contact area between the tire tread and the ground leads to higher rolling resistance, resulting in increased fuel consumption. Additionally, the wear on the tire tread will abnormally concentrate on both sides. 2. Extended information: The vehicle can still be driven when pressure loss is detected. The tire pressure monitoring system will only alert the driver when the tire pressure drops to the minimum pressure limit.

20

2

Share

Can a Used Car Be Transferred Along with Its License Plate?

Buying a used car does not allow for the transfer of the license plate along with it. If the original license plate meets the usage period requirement, it can be retained under the original owner's name for use when purchasing a new car. If the conditions are not met or the owner relinquishes the original license plate, the vehicle management office will reclaim it, and the new owner will need to select a new license plate. Conditions under which a vehicle cannot be transferred include: 1. Vehicles without compulsory traffic insurance cannot be transferred; 2. Vehicles that have been modified, altered, or had their cargo weight or passenger capacity changed without approval; 3. The applicant cannot act as an agent for the original owner to complete the transfer procedures; 4. Vehicles with unresolved traffic violations, accidents, or those under investigation by authorities; 5. Vehicles that have not undergone regular inspections or have failed inspections; 6. Smuggled, customs-supervised, or stolen vehicles cannot be transferred; 7. Vehicles under court-ordered freeze or with unresolved mortgages; 8. Commercial vehicles converted to non-commercial use that have reached the scrap age or will reach it within one year; 9. Used cars being relocated in or out that do not meet local standards.

15

4

Share

Why does the Civic need system initialization after power loss?

Because the vehicle has an onboard computer, the stored memory information is lost after power loss, requiring initialization. Below are relevant explanations: 1. Causes of power loss: GPS-induced power loss (recommend inspecting GPS at installation location if suspected). Faulty wiring or poor grounding of anti-theft devices. Forgetting to turn off lights or other electrical equipment after parking, resulting in battery drain. 2. Additional information: Precautions for new Civic models after power loss: Before parking and turning off the engine, users should first deactivate all electronic devices in the vehicle, such as radios, headlights, and other electrical equipment.

17

4

Share

Why are the lights still on after locking the Sagitar?

If the taillights remain on after the car is turned off, it may indicate a faulty brake switch. Here are the relevant explanations: 1. When the brake switch is faulty: The owner can replace the brake light switch themselves. Alternatively, they can seek treatment at a professional repair shop. If it's not the car's brake light switch, it could be a fault in the car's circuit. 2. Extended information: The main function of the AUTO feature is to eliminate the need for the driver to manually turn on the headlights. The vehicle will use the exterior light brightness sensor to determine whether the headlights need to be activated for illumination. In most cases, the activation of the 'leave home' function occurs when pressing the unlock button on the remote key at night with the light switch in the AUTO position, causing the headlights to automatically turn on. The 'come home' function is activated by turning off the ignition switch and operating the headlight flasher to illuminate the headlights for a period of time to provide lighting for the user.

2

1

Share

Why Can't the Skoda Car Window Be Rolled Up or Down?

Window failure to roll up or down should consider two aspects of fault causes: electrical failure/circuit failure and mechanical failure. Below are the relevant introductions: 1. Car circuit failure: The car battery is disconnected or the window control circuit is disconnected during maintenance. At this time, only the window system needs to be reset. Turn on the car ignition switch, hold the switch to keep the window in the rising state, wait for the glass to rise to the top and continue to hold for more than three seconds, release the lifting switch and immediately press to keep the window in the descending state, make the window glass descend to the bottom and wait for more than three seconds, and then continue to repeat the rising window action once, the window lifting system reset is completed. 2. Window mechanical failure: The problem is mostly due to excessive dust in the window glass groove, increased resistance causing the window lifter to be obstructed and unable to work normally. In case of such a problem, go to a professional car repair shop for cleaning.

4

2

Share

Why does the Subaru atoiltemp warning light flash?

Subaru's atoiltemp light refers to the transmission oil temperature warning light, which typically appears during the vehicle's self-check when the key is turned to the start position before ignition and should disappear after the engine starts. If it does not go off, it is recommended to visit a Subaru dealership to reset or update the vehicle's software. 1. Solutions: Avoid overusing the vehicle, such as towing excessive loads; refrain from driving for extended periods in four-wheel-drive snow mode or sport mode; when the atoiltemp light is on, stop driving to prevent overheating and damage to the transmission, and it is advisable to have it checked at a service center. 2. Additional Information: Subaru vehicles are known for their unique technologies, particularly the horizontally opposed engine and the full-time all-wheel-drive system. Subaru has achieved significant sales growth in recent years, with global sales reaching a record high in 2006. Fuji Heavy Industries has continuously developed distinctive all-wheel-drive systems and high-performance horizontally opposed engines. Their all-wheel-drive system, refined over more than 20 years and tested under harsh driving conditions worldwide, has seen continuous improvements in performance and quality.

7

4

Share

What engine does the Sharan use?

What does it mean when Skoda detects a pressure loss?

Can a Used Car Be Transferred Along with Its License Plate?

Why does the Civic need system initialization after power loss?

Why are the lights still on after locking the Sagitar?

Why Can't the Skoda Car Window Be Rolled Up or Down?

Why does the Subaru atoiltemp warning light flash?

What are the differences between China 4 and China 5 standards?

What to Pay Attention to When Transferring Ownership of a Used Car?

What are the reasons why a Toyota car won't start?

How many years can a Toyota Vios normally last?