What engine does the Ruifeng S7 have?

Does a Motorcycle Need Repair After Wading Through Water?

It is advisable to have your motorcycle inspected after wading through water to avoid potential malfunctions caused by water ingress. If necessary maintenance is not performed promptly, it can not only affect the normal operation of the vehicle but also lead to premature damage to various components of the motorcycle. Here are some precautions for driving a motorcycle through water: 1. Inspect the wading route before proceeding: Before wading, check the depth, water flow speed, and condition of the riverbed. Avoid taking risks when driving through water. You can assess the situation by observing other vehicles passing through or by stepping into the water yourself to test the route. Then, proceed diagonally in the direction of the water flow. 2. Shift gears before wading: Before driving through water, shift to a lower gear and enter the water slowly. Maintain a steady and even speed with sufficient power (low gear) to prevent splashing water, which could cause electrical or fuel system failures and lead to engine stalling.

18

4

Share

What is the reason the headlight adjustment screw doesn't work?

If the misalignment is caused by an accident, the positioning needs to be readjusted. However, in many cases, it's due to improper adjustment where turning the screw to the limit has no effect - this isn't caused by accidents or damage. In such situations, an experienced technician should perform the adjustment. Another possibility is that the bulb's original angle is incorrect, making adjustment impossible; in this case, simply replacing the bulb will suffice. Detailed information about headlight adjustment is as follows: 1. Standard for car headlight adjustment: Park the car 7.6 meters away from a wall, turn on the headlights, and adjust the beam position according to the light pattern on the wall, adjusting both high and low beams sequentially. Alternatively, you can drive the car onto a level road, align the low beam's focal point at 30 meters with two points overlapping, and adjust the high beam to be parallel with the ground. 2. Headlight height adjustment: The headlight height adjustment switch uses a rotary wheel marked with numerical gears. The numbers indicate the headlight height level - the higher the number, the higher the headlight beam points. Correct adjustment of headlight beam height is crucial, as the directional height of the beam not only affects actual illumination effectiveness but also significantly impacts driving safety for both your vehicle and others.

16

4

Share

Why Does the Car Carpet Get Wet When It Rains?

Reasons why the car carpet gets wet when it rains: The causes of water ingress inside the vehicle include loose door seals allowing rainwater to enter, clogged drainage holes on both sides of the U-shaped channel below the windshield leading to water accumulation, and the need to inspect aging rubber seals along with clogged sunroof drainage holes or pipes causing poor water flow. Related matters concerning car water leakage: 1. If there is water leakage in the trunk, it is usually due to the bottom rubber plugs not being fully engaged. 2. For loose weatherstrips, reattach them using specialized adhesive to restore sealing performance and prevent further leakage. Pay attention to aging weatherstrips in older vehicles. 3. If peeling occurs, reattach using a waterproof adhesive called sealant, being careful not to overstretch to avoid damage. 4. When part of the weatherstrip is lifted or twisted, rainwater often enters from there. Severe deformation requires replacement. 5. Leakage around the door is mostly caused by the surrounding weatherstrip. Check for any breaks or peeling. 6. If a small section is difficult to reattach, peel it off completely and reapply to fix any twisting or loosening of the weatherstrip.

3

1

Share

Does Gasoline Corrode Car Paint?

Gasoline can corrode car paint. Under normal circumstances, it is not advisable to use gasoline to wipe a car because automotive paint is baked-on paint, and gasoline can significantly affect the surface gloss and even cause peeling. It is recommended to have the vehicle cleaned at a professional car wash. Automotive paint primarily consists of resin, pigment, additives, fillers, curing agents, solvents, etc. Metallic automotive paint includes reflective metallic flakes (aluminum powder), while pearlescent paint contains mica particles. Automotive paint must possess excellent weather resistance, scratch and abrasion resistance, gloss retention, and superior resistance to gasoline, alcohol, acids, alkalis, salt spray, and other chemicals. However, gasoline is an organic solvent capable of dissolving organic materials, so it can have a certain impact on car paint. Car paint maintenance can be done in the following ways: Waxing: Forms a protective wax film on the car's paint surface to inhibit oxidation caused by external harmful elements. Glazing: Enhances the strength of the car paint, preventing minor scratches caused by windblown sand and offering protection against high temperatures and UV rays. Coating: Represents the highest level of paint protection, preventing oxidation and providing a glossy surface resistant to acids, alkalis, oxidation, UV rays, and more. Polishing: Through grinding and polishing, oxidized paint surfaces are removed, restoring the vehicle's shine and temporarily bringing the color back to a like-new condition.

1

Share

How to Reset the Check Engine Light on a Cruze by Yourself?

If the check engine light is on, you can follow these steps to address the issue: First, check whether the engine is running normally. Look for symptoms such as shaking, black smoke, or difficulty starting. If any of these issues are present, avoid restarting the engine. Note: If the light is red, do not attempt to restart the engine under any circumstances. If the engine is running normally and the vehicle can still be driven, visit a service center as soon as possible to diagnose the problem. A service center can easily read the trouble codes using a portable diagnostic tool and perform targeted repairs based on the fault information. If the engine is running normally, the owner can also try gently reconnecting wiring harness plugs, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position may reset the light. Generally, the check engine light may illuminate due to the following seven reasons: 1. Sensor Malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. If these sensors are damaged, poorly connected, or their signals are interrupted, the ECU cannot accurately obtain engine data, triggering the check engine light. 2. Fuel or Oil Quality Issues: Using fuel or engine oil that does not meet the manufacturer's specifications may cause engine wear and trigger the warning light. 3. Poor Combustion of Air-Fuel Mixture: Incomplete combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the check engine light will illuminate. Possible causes include faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines. 4. Turbocharger Problems: Issues with the intake boost system or turbocharger can also trigger the light. Common turbocharger failures may be accompanied by oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black smoke from the exhaust. 5. Air Intake Issues: Clogged intake passages can lead to engine problems, and severe blockages may cause the check engine light to turn on. A dirty or uncleaned air filter can restrict airflow. 6. Exhaust System Problems: Faults in the exhaust system, such as a malfunctioning rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, can trigger the light. The catalytic converter is particularly susceptible to damage from leaded gasoline, improper additives, physical impact, or fuel system issues. 7. Immobilizer System Fault: If the car's electronic immobilizer malfunctions or is incompatible with the engine control unit, the engine may not operate correctly, and the check engine light will illuminate.

4

2

Share

What is the minimum ground clearance of the Teana?

Teana's minimum ground clearance is 132mm when unloaded. Here is some extended information about minimum ground clearance: 1. Definition: Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting surface when fully loaded and stationary, which indicates the vehicle's ability to pass over obstacles such as rocks and stumps without collision. 2. Meaning: It represents the vehicle's capability to overcome obstacles (like rocks, etc.). 3. Capability: The smaller the ground clearance, the poorer the ability to overcome obstacles. 4. Reason: Sedans generally operate on flat urban roads, hence they have smaller ground clearance.

10

2

Share

What engine does the Ruifeng S7 have?

Does a Motorcycle Need Repair After Wading Through Water?

What is the reason the headlight adjustment screw doesn't work?

Why Does the Car Carpet Get Wet When It Rains?

Does Gasoline Corrode Car Paint?

How to Reset the Check Engine Light on a Cruze by Yourself?

What is the minimum ground clearance of the Teana?

Can the car heater be turned on without starting the engine?

How to Remove the Brake Disc of the Santa Fe?

How to Remove the Rear Seat of a Mazda 6?

Reasons for Insufficient Power of LNG Vehicles on Uphill Roads