What engine does the Roewe RX8 use?

1 Answers
LeCarson
07/29/25 11:00pm
The Roewe RX8 is equipped with a 2.0-liter four-cylinder turbocharged engine codenamed 'Blue Core'. This engine delivers a maximum horsepower of 222 HP, a peak power output of 163 kW, and a maximum torque of 360 N·m. The Roewe RX8 is a mid-to-large-sized SUV produced by SAIC Motor, with the currently available model being the 2019 version. In terms of body dimensions, the Roewe RX8 measures 4923 mm in length, 1930 mm in width, and 1840 mm in height. For transmission, the Roewe RX8 is exclusively paired with a 6-speed automatic transmission with manual shift mode. According to the Ministry of Industry and Information Technology's comprehensive fuel consumption data, the Roewe RX8 has a combined fuel consumption of 9.2 liters per 100 kilometers. Regarding suspension, the front suspension of the Roewe RX8 features a double-wishbone independent suspension, while the rear suspension utilizes a five-link independent suspension.
Was this review help?
2
1
Share
More Forum Discussions

Will a Novice Driver Get Points Deducted for the First Traffic Violation?

Points will be deducted. From the date of obtaining the driver's license, any traffic violation can result in points deduction based on the severity of the violation. The same applies during the probationary period. If 12 points are deducted during the probationary period, the license will be revoked. Below is relevant information: Handling: Points deduction on a driver's license is a penalty for traffic violations. Depending on the severity of the violation, points can range from a minimum of 1 to a maximum of 12 per offense. The points accumulation cycle is one inspection period. If a driver accumulates 12 points in one cycle, they lose their driving privileges. Typically, they must undergo no less than 7 days of traffic safety education and pass an exam before their driving privileges can be restored. License Suspension: Driving under the influence of alcohol, allowing someone without a valid driver's license or whose license has been revoked or suspended to drive, driving 50% over the speed limit, driving a modified or scrapped vehicle, causing a major traffic accident that constitutes a crime, or accumulating 12 points in one points cycle.
12
3
Share

Where is the Cruze reversing radar module located?

The Cruze reversing radar module is located at the center console screen position, and the reversing radar will activate when the reverse gear is engaged. Method for installing a reversing radar on a Chevrolet Cruze: 1. Install four radars at the rear of the car. First, use measuring tools to mark the installation positions of the probes. 2. Prepare an electric drill, install the provided specialized drill bit, and drill holes at the marked positions. 3. Connect the probes to the wiring harness and install them in the corresponding drilled holes. Then, organize the wiring harness of the probes and route it to the trunk. 4. Install the front two probes, then install the rear probes using the same method. 5. Route the wiring harness of the front probes to the brake position of the driver's seat and connect it to the trunk through the door gap. Next, connect the red wire to the reversing wire and the white wire to the brake wire. 6. Connect the display, probe wiring, etc., to the main unit. Secure and hide the main unit inside with adhesive tape, then fix the display screen to complete the installation.
14
3
Share

Where to Apply for a Motorcycle License in Baoding?

To obtain a motorcycle license in Baoding, you can apply at the vehicle management office of the local traffic management department under the public security authority, either at your place of residence or temporary residence. Below is relevant information about the motorcycle license application: 1. Required materials: Generally, you can apply for a motorcycle license at a driving school approved by the traffic police department. You will need to pay a certain application fee and prepare 8 white-background photos and a 10-yuan medical examination fee. For non-local residents, a local residence permit is also required. If you are upgrading your license, you must provide the original driver's license. The fees and examination process for first-time applicants and those upgrading their license are the same. After registration, a medical examination is required, which mainly includes tests for color blindness, physical disabilities, and vision. 2. Examination content: The test consists of four parts: Subjects 1, 2, 3, and 4. Subjects 1 and 4 are theoretical tests, assessing general knowledge and emergency response capabilities. Subjects 2 and 3 are practical road tests. Subject 2 involves navigating around poles—four poles are placed in a straight line, and you must weave through them in an S-shape and then weave back, without your feet touching the ground, the engine stalling, or the vehicle crossing the line. Subject 4 requires driving as instructed by the examiner.
1
0
Share

What is the maximum allowed speed of the Tiggo 8?

The maximum allowed speed of the Tiggo 8 is 190 km/h. The maximum speed refers to the highest driving speed that a car can achieve on a well-paved road, which is the speed when the driving resistance and driving force are balanced under windless conditions on a flat road surface. It is one of the evaluation indicators of a car's dynamic performance. The Tiggo 8 is a mid-size SUV under the Chery brand. This vehicle has a wheelbase of 2710 mm, with a length, width, and height of 4700 mm, 1860 mm, and 1746 mm respectively. The Tiggo 8 is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 230 Nm. This engine reaches its maximum power at 5500 rpm and its maximum torque between 1750 to 4000 rpm. The 1.6-liter turbocharged engine produces 197 horsepower and a maximum torque of 290 Nm. This engine achieves its maximum power at 5500 rpm and outputs its maximum torque between 2000 to 4000 rpm.
2
2
Share

Can a hole in the bumper be patched?

A hole in the bumper can be repaired, but it is not recommended because the bumper is a high-pressure point for wind resistance. If the craftsmanship or materials are slightly inferior, it is prone to damage again. Therefore, replacement is recommended. The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear of the vehicle body. Here is an introduction to car bumpers: 1. Bumper material: The front and rear bumpers of a car are made of plastic, known as plastic bumpers. They are generally made of polyolefin and polypropylene materials, formed by injection molding. 2. Bumper composition: The plastic bumper of a car consists of three parts: the outer panel, buffer material, and crossbeam. The outer panel and buffer material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin sheets into a U-shaped groove; the outer panel and buffer material are attached to the crossbeam. 3. Other functions of the bumper: Plastic bumpers have strength, rigidity, and decorative properties. From a safety perspective, they can act as a buffer during collisions, protecting the front and rear of the car body. From an aesthetic standpoint, they can naturally integrate with the car body, forming a seamless whole, and serve as an important decorative component of the car's exterior.
16
0
Share

How to Reset the Engine Oil for Kia K3?

Kia K3 engine oil reset steps are as follows: 1. Press the TIPE button to display the maintenance reminder number. 2. Then hold the TIPE button for several seconds to bring up the menu with "Consumables Settings." 3. Press REST to confirm and use TIPE to select from options like 3000KM, 4000KM, and 5000KM, choosing based on the specific condition of your vehicle. 4. The engine oil reset will then be completed. Below is an introduction to Kia K3 maintenance oil: 1. For Kia K3 maintenance, you can use SN-grade oil. Kanglibo SN utilizes ANT technology, formulated with high-quality synthetic base oil PAO and imported additives, offering significant performance advantages over SL-grade oils. Additionally, when switching to the same brand's product, there is no need to clean the engine. However, if the engine is particularly dirty, it is recommended to clean it before changing the oil for better results. 2. For vehicle operation and maintenance, you can use the oil recommended by the manufacturer or opt for higher-grade oils, as premium oils can extend the maintenance interval. The highest-grade oil is SM, followed by SN, with SJ being the most commonly used. There are also fully synthetic oils, which are the most expensive, semi-synthetic oils, and mineral oils, among others.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.