What engine does the Range Rover use?

How many kilometers should the shock absorbers of the Malibu be replaced?

The shock absorbers of the Malibu generally need to be replaced after driving 80,000 kilometers, and should not exceed 100,000 kilometers at most. Although there is no exact replacement cycle for shock absorbers—they need to be replaced as soon as they fail—shock absorbers are wear-prone parts that can get damaged as the vehicle's mileage increases, hence the need for regular replacement. Information about shock absorbers is as follows: 1. Shock absorbers are mainly used to suppress the oscillation of the spring after absorbing shocks and impacts from the road. When driving on uneven roads, although the shock-absorbing springs can filter out road vibrations, the springs themselves still have reciprocating motion, and the role of the shock absorber is to suppress this spring bouncing. 2. In automotive suspension systems, tube-type shock absorbers are widely used, which can provide damping in both compression and extension strokes, known as double-acting shock absorbers. There are also new types of shock absorbers, including gas-filled shock absorbers and adjustable-resistance shock absorbers.

13

3

Share

Why was the Cruze discontinued?

The main reason for the discontinuation of the Chevrolet Cruze is its poor sales performance. Below is a detailed introduction to the reasons for the Cruze's discontinuation: 1. The Cruze's sales were sluggish, and its advantages were not prominent enough among competing models. Consumers had more choices in the same vehicle segment, which affected the sales of the Chevrolet Cruze. 2. The design style of the Chevrolet Cruze underwent significant changes during its mid-cycle facelift. Based on consumer feedback, the car was not well-suited for transitioning from a moderate style to a more aggressive one. 3. When the Cruze was first launched, consumers quite liked it, and although sales were affected, they were not terrible. However, after competing models such as the Lavida, Sylphy, and Civic—all A-segment sedans—entered the market, they made breakthroughs in terms of exterior design, interior features, and powertrain composition. In comparison, the Cruze was not outstanding in terms of quality, fuel efficiency, or appearance. Gradually, consumers began to abandon it, and the market marginalized it. With sales failing to improve, the only option was to discontinue production.

13

3

Share

What Transmission Does the Spirior Use?

Honda Spirior Transmission Models: The 2.0L version uses a CVT (Continuously Variable Transmission), while the 2.4L version is equipped with an 8-speed DCT (Dual Clutch Transmission). Here are the relevant details: 1. The Honda Spirior utilizes an 8-speed dual-clutch transmission independently developed by Honda. Its unique parallel-axis automatic transmission combines a torque converter with constant-mesh gears, integrating the characteristics of both manual and traditional automatic transmissions. Similarly, this dual-clutch transmission still connects to the drive shaft via a torque converter, but the internal structure has been replaced with a dual-clutch mechanism. 2. The advantages of this structure are evident. Firstly, it effectively provides smoother low-speed crawling performance and theoretically offers higher reliability. According to official data, this 8-speed dual-clutch transmission improves fuel economy by 11%, increases efficiency by 4%, and enhances acceleration performance by 10% compared to the previous 5-speed automatic transmission.

5

4

Share

Should You Shift Gears or Release the Handbrake First When Starting an Automatic Transmission Car?

When starting an automatic transmission car, you should shift gears first and then release the handbrake. Below is an introduction to the relevant content: 1. Automatic Transmission: Automatic transmission usually refers to the car's automatic gear-shifting mechanism. While driving, the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load. 2. Operation: It replaces the driver's subjective judgment of timing and gear-shifting operations. 3. Gears: A typical automatic transmission car has six gears, arranged from top to bottom as P, R, N, D, S, L. 4. Professional Term for Handbrake: It is an auxiliary brake, different in principle from the main brake. It uses a steel cable connected to the rear brake shoes to brake the car. Long-term use of the handbrake can cause the steel cable to undergo plastic deformation. 5. Deformation: Since this deformation is irreversible, long-term use will reduce its effectiveness, and the handbrake's travel distance will also increase.

3

2

Share

What does Excelle 15T and 18T mean?

Excelle 15T represents a 1.0 turbocharged engine, while Excelle 18T represents a 1.3 turbocharged engine. Below is a related introduction to Excelle engines: 1. The turbocharged engine of Excelle 15T is a three-cylinder engine, and Excelle 18T represents a 1.3 turbocharged engine, which is also a three-cylinder engine. 2. 18T indicates that the engine is a 1.3-liter turbocharged model. Displacement refers to the total volume of air and fuel mixture that can be delivered to all cylinders during one complete engine cycle, and it also refers to the volume that a piston can displace from one stroke to another. 3. The 1.0-liter turbocharged engine is a three-cylinder engine with a maximum power of 92 kW, a maximum torque of 170 Nm, a maximum power speed of 5600 rpm, and a maximum torque speed range of 2000 to 3600 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.

10

3

Share

Symptoms of Clutch Disc Slippage?

Symptoms of clutch disc slippage include the car being unable to start or having difficulty starting when the clutch pedal is fully released. Here are the extended reasons for clutch disc slippage: 1. The rivets connecting the clutch steel plate to the groove shell flange are damaged or fallen off, causing slippage between the clutch disc and the transmission input shaft. 2. Insufficient pressure or broken springs in the clutch pressure plate, resulting in incomplete engagement between the pressure plate and the clutch disc. 3. Insufficient release lever clearance or pedal obstruction prevents tight engagement between the pressure plate and clutch disc, or the release lever is adjusted too high. 4. The clutch release bearing presses against the release lever, preventing the pressure springs from functioning fully, meaning there's no clearance between the release lever and clutch thrust bearing. 5. Oil contamination on the clutch disc lining reduces the friction coefficient, causing the driving and driven parts to rotate asynchronously.

13

4

Share

What engine does the Range Rover use?

How many kilometers should the shock absorbers of the Malibu be replaced?

Why was the Cruze discontinued?

What Transmission Does the Spirior Use?

Should You Shift Gears or Release the Handbrake First When Starting an Automatic Transmission Car?

What does Excelle 15T and 18T mean?

Symptoms of Clutch Disc Slippage?

What is the ground clearance of the Skoda Octavia?

What are the exterior dimensions of the CR-V?

Where is the air conditioning filter of Volkswagen Polo located?

What is the real fuel consumption of the Emgrand GS 1.4T?