···
Log in / Register

What engine does the Qoros 5 use?

5 Answers
OBlakely
07/29/25 5:18pm

Taking the 2019 model as an example, all Qoros 5 vehicles are equipped with a 1.6-liter inline 4-cylinder turbocharged engine. It is important to note that although all Qoros 5 models use the same 1.6-liter inline 4-cylinder turbocharged engine, they are available in two different power outputs: high and low. The low-power version of the 1.6-liter inline 4-cylinder turbocharged engine is paired with a 6-speed dual-clutch transmission, delivering a maximum power of 115KW, maximum horsepower of 156PS, maximum torque of 210Nm, maximum power speed at 5500rpm, and maximum torque speed ranging from 1750 to 5000rpm. The fuel supply system is multi-point electronic injection, and all models meet the China V emission standard. The high-power version of the 1.6-liter inline 4-cylinder turbocharged engine is paired with a 7-speed dual-clutch transmission, delivering a maximum power of 145KW, maximum horsepower of 197PS, maximum torque of 290Nm, maximum power speed at 5500rpm, and maximum torque speed ranging from 2000 to 4000rpm. The fuel supply system is direct injection, and all models meet the China VI emission standard.

Was this review help?
8
1
Share
VanCamille
08/14/25 7:59am

Since childhood, I've been fascinated by the inner workings of cars. The Qoros 5 SUV is powered by a 1.6-liter turbocharged gasoline engine with the model number SQRE4T16, delivering a maximum output of 145 horsepower and a peak torque of 210 Newton-meters. It features direct fuel injection technology and is paired with a 6-speed dual-clutch transmission, providing responsive power delivery and smooth acceleration without any abruptness. In daily driving, the power is more than adequate for city commuting, making overtaking effortless, while noise control on highways is commendable. However, in terms of fuel consumption, it averages around 8.5 liters per 100 kilometers, which isn't the lowest but is still reasonable. For maintenance, I use full synthetic oil and regularly inspect the turbo system to prevent carbon buildup from affecting its lifespan. This engine was developed by Qoros based on the Chery platform and is considered reliable in terms of durability among domestic brands.

Was this review help?
19
0
Share
Expand All
LaJuliet
10/13/25 6:13am

As a Qoros 5 owner, I've been driving this SUV for over two years. It's equipped with a 1.6T turbocharged engine that delivers robust power output, with particularly crisp response during urban starts. It handles suburban uphill sections effortlessly, even when fully loaded with luggage for family trips. Fuel consumption stays under 9L/100km, and it runs fine on 92-octane gasoline, making it reasonably economical. The engine noise is minimal at idle, with slightly noticeable wind noise at highway speeds that doesn't hinder conversation. I'd advise new owners to strictly follow maintenance schedules, replace filters promptly, keep the engine clean to prevent turbo lag. Overall, it offers safe and stable driving performance, well-suited for daily commuting.

Was this review help?
15
4
Share
Expand All
LaOmar
11/26/25 7:10am

Having repaired cars for ten years, the Qoros 5 commonly comes with a 1.6-liter turbocharged engine, delivering around 145 horsepower. Its structural design is reasonable, making maintenance straightforward—usually just oil and filter changes. However, owners who neglect regular maintenance may encounter issues like clogged fuel injectors or worn piston rings, which I've seen in several cases. Using genuine parts is crucial, and keeping the air system clean can extend its lifespan. The power output is reliable, making it a worry-free drive when properly maintained.

Was this review help?
14
0
Share
Expand All
DePeter
11/26/25 7:12am

When choosing the Qoros 5, I was drawn to its sporty styling. The 1.6T turbocharged engine delivers outstanding power performance, with quick acceleration that perfectly suits young drivers' preferences. In city driving, it starts off lightly, and the power doesn't lag when turning. On long trips, the fuel consumption remains stable at around 8.5 liters. I'm quite satisfied with it, and there have been no safety issues. Occasionally driving on mountain roads, the power is more than adequate.

Was this review help?
14
3
Share
Expand All
More Forum Discussions

What Causes a Motorcycle to Have Unstable Firing with a 'Tututu' Sound?

When a motorcycle only makes a 'tututu' sound but fails to start during ignition, there are several potential causes to consider. It is necessary to separately check whether the spark plug is faulty, whether there is a misfire or the high voltage is too weak, whether the gasoline is of poor quality, whether the carburetor is clogged (clean the carburetor), and whether the carburetor's air-fuel mixture ratio is improperly adjusted. Additionally, check whether the choke is used incorrectly or has issues preventing the enrichment of the mixture, whether the valve clearance is too small or the valves are not sealing properly, whether there is a flooded cylinder, whether the cylinder pressure is too low, whether there is slight air leakage in the intake pipe or other rubber hoses, and whether the valve timing is incorrect. Any of these issues could lead to this type of malfunction.
8
4
Share

Which Vehicles Are Exempt from Toll Charges on Highways?

Vehicles exempt from toll charges on highways include micro buses, sedans, small buses, small off-road vehicles with 7 seats or fewer, as well as motorcycles permitted to travel on regular toll roads. Below is an introduction to highways: 1. Overview: Highways are classified as high-grade roads, commonly referred to as expressways. 2. Requirements: According to the "Technical Standards for Highway Engineering" by the Ministry of Transport of China, highways are defined as "roads capable of accommodating an average annual daily traffic volume of over 25,000 small passenger vehicles, exclusively designed for high-speed divided-lane travel, with fully controlled access." 3. Development: Although different countries have varying names for highways, they all specifically refer to roads with at least four lanes, separated directional traffic, fully controlled access points, and entirely grade-separated interchanges. Additionally, many countries also classify direct trunk roads with partially controlled access and not entirely grade-separated interchanges as highways.
13
3
Share

Where is the cabin air filter located on the BMW 525Li?

The cabin air filter of the BMW 525Li is located in the engine compartment, adjacent to the engine hood support rod, and can be seen upon opening the hood. Below is relevant information about the cabin air filter: 1. The cabin air filter purifies air entering the vehicle interior from outside, improving air cleanliness. It typically filters impurities in the air, including microscopic particles, pollen, bacteria, industrial exhaust, and dust, preventing them from entering the air conditioning system and causing damage. It protects the health of vehicle occupants and prevents window fogging. 2. A high-quality cabin air filter can absorb fine particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, enhance driving comfort, and protect the air conditioning cooling system. There are two types of cabin air filters: one without activated carbon and another with activated carbon. The activated carbon cabin air filter not only performs the above functions but also absorbs a significant amount of odors. The general replacement interval for the cabin air filter is every 10,000 kilometers.
20
2
Share

What is the displacement of 60tfsi?

According to the manufacturer's model information, the imported Audi A8L-60-TFSI model has a displacement of 4.0T and a maximum horsepower of 435hp. Here is some extended information: 1. Audi A8L market: The Audi A8L is a car produced by Volkswagen Group of Germany. It is the most high-end luxury car in the Audi lineup, featuring an all-aluminum body with a top speed of 250km/h, positioned to compete with the Mercedes S600 and BMW 7 Series. Currently, there are three models available, all equipped with V6 spark plugs and 5 valves per cylinder. 2. Audi A8L exterior: The all-aluminum body frame structure (ASF) and permanent all-wheel drive quattro are unique technologies of Audi. ASF technology can reduce the vehicle weight by 50% while increasing strength by 60%. Quattro technology can improve the car's off-road capability and stability. The Audi A8L, which combines these two 'unique skills,' can be called the pride of the luxury car lineup.
18
3
Share

On which days of the week is Subject 4 usually taken?

It can be scheduled from Monday to Friday, depending on the appointment time. Relevant details are as follows: 1. Exam content: Subject 4, also known as the Subject 4 theoretical exam or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 exam was divided into two parts: besides the road test, a safe and civilized driving test was added, commonly referred to as "Subject 4," which evaluates "driving ethics." Since this test is conducted after Subject 3, it is commonly called the Subject 4 exam. However, there is no official term "Subject 4" in the actual regulations. 2. Exam format: The test paper consists of 50 questions, mainly in the form of case studies, images, animations, etc. The total score is 100, with a passing score of 90.
14
5
Share

Can Improper Gear Shifting Damage the Transmission Gears of a Motorcycle?

Yes, shifting gears on a motorcycle without pulling the clutch can cause jerking sensations, gear grinding, and in severe cases, damage the transmission. While riding at high speeds, you can shift gears without using the clutch, but this is only applicable during acceleration. When decelerating, the clutch must be used to avoid damaging the transmission. Transmission gears operate under conditions of high speed, high load, and constantly alternating speed and load. Apart from normal wear, factors such as poor-quality lubricating oil, inadequate lubrication, improper driving techniques, incorrect gear assembly during maintenance (leading to improper meshing), gear impacts, poor tooth meshing, and shaking during startup can all accelerate gear wear and damage. Additionally, wear in other parts of the gear or related components (such as spline grooves in gear holes, bearings, or spline shafts), deformation (e.g., wear or deformation of transmission housing bearing seats, bending of spline shafts), improper assembly of the clutch or drive shaft, and manufacturing defects (like uneven carburization or gear warping) can also hasten gear wear.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.