What engine does the Nissan X-Trail use?

1 Answers
LeJeffrey
07/29/25 4:46pm
Nissan X-Trail engines are: 2.0-liter inline 4-cylinder naturally aspirated engine and 2.5-liter inline 4-cylinder naturally aspirated engine. They are domestically produced. The Nissan X-Trail engine model is KR15, with a maximum power of 113kw and a maximum torque of 204nm; the 2.5-liter engine has a maximum power of 137kw and a maximum torque of 246nm. For daily maintenance of the Nissan X-Trail engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, bypassing the filter and carrying dirt back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
14
1
Share
More Forum Discussions

On Which Pulley Does Belt Slippage Occur First?

Belt slippage first occurs on the smaller pulley. Introduction to the Contact Arc: The contact arc can be divided into two parts: the part with relative sliding (sliding arc) and the part without relative sliding (static arc). The central angles corresponding to these two arcs are called the sliding angle and the static angle, respectively. The static arc is always located at the beginning part where the belt wraps around the driving and driven pulleys, while the sliding arc is located on the part of the contact arc where the belt leaves the driving and driven pulleys. When the belt is not transmitting load, the sliding angle is zero. Elastic Sliding: Elastic sliding only occurs on the sliding arc of the belt. As the load increases, the sliding angle gradually increases, while the static angle gradually decreases. When the sliding angle increases to the wrap angle of the pulley, the limit state is reached, and the effective tension of the belt drive reaches its maximum (critical) value. If the working load continues to increase, significant relative sliding between the belt and the pulley will occur, resulting in slippage. Since the wrap angle on the larger pulley is always greater than that on the smaller pulley, slippage always occurs first on the smaller pulley.
10
3
Share

What number to call to have a blocking vehicle moved?

Call 114 to have a blocking vehicle moved. Solutions: If unable to contact the owner, call the auto insurance hotline, 114 or 110. If your car is blocked, check if the owner left a phone number. If available, call the owner directly. If no phone number is displayed, look for the owner's commercial insurance sticker and call the insurance company's service hotline to request they notify the owner to move the vehicle. 114 Hotline: After dialing 114, state you need to locate a vehicle owner. 114 will transfer you to a dedicated hotline. Simply provide the vehicle's color, license plate number, and model. The operator will immediately contact the owner to request vehicle relocation. Alternatively, call 110 or 122.
2
4
Share

What is the normal annual mileage for a car?

It is normal for a car to run 20,000 kilometers per year. Introduction to normal mileage: Generally, the normal mileage for a private car is defined as not exceeding 20,000 kilometers per year. This is also an important reference value for used car transactions. In other words, if a car has been used for two years with a mileage of 60,000 kilometers, it theoretically means the car has been driven quite hard. Definition of mileage: The mileage of a car starts counting from zero when it leaves the factory, and there are at least two mileage readings. One is the total mileage, which represents the total distance traveled from the factory to the present. It will always increase regardless of the driving conditions and will never decrease. The other is the trip mileage, which can be reset during the journey. Many car owners use the trip mileage to calculate how far a full tank of fuel can take them.
6
4
Share

What is the goal of the Lynk & Co brand?

The goal of the Lynk & Co brand is to become a global new premium luxury brand. Introduction to the Lynk & Co brand: LYNK & CO (Chinese name: Lingke) is a new era premium brand jointly established by Geely Holding Group, Geely Auto Group, and Volvo Car Group. It integrates European technology, European design, global manufacturing, and global sales, based on the CMA (Compact Modular Architecture) jointly developed by Volvo Cars and Geely Auto, with Volvo Cars taking the lead. Lynk & Co's technological philosophy: LYNK & CO is a new era premium brand that embodies European technology, European design, global manufacturing, and global sales. Upholding the brand philosophy of "Born Global, Open and Connected," and the brand values of "Individuality, Openness, and Connectivity," it carries inherent global DNA, designed for urban populations worldwide. Born in the internet era, Lynk & Co merges internet thinking with traditional automotive industry practices, driving a transformation in mobility towards individuality, openness, and connectivity.
10
3
Share

How many kilometers is normal for a car to run in a year?

A normal annual mileage should be around 10,000 kilometers, which is an average figure. If a car runs 5,000 kilometers in a year, it is being used normally. Running 10,000 kilometers is quite normal and there is no need for excessive concern. If a car runs 20,000 kilometers in a year, it is advisable to increase the maintenance efforts for the car. Below is the relevant introduction to daily car maintenance: Vehicle maintenance generally consists of two types of services, categorized as major services and minor services. The minor service mainly includes changing the engine oil and oil filter. The major service involves changing the engine oil, oil filter, air filter, and fuel filter as part of routine maintenance. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
8
5
Share

What Types of Cars Use 98 Octane Gasoline?

Cars with engine compression ratios of 10 and above typically use 98 octane gasoline. Anti-Knock Combustion Capability: 98 octane gasoline offers higher anti-knock performance and power output, while 95 octane gasoline has average anti-knock combustion capabilities. Gasoline appears as a transparent, flammable liquid, refined from petroleum-derived components such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline. After refinement and blending with high-octane components, it is primarily used as fuel for spark-ignition internal combustion engines in automobiles. Introduction to 98 Octane Gasoline: 98 octane gasoline refers to fuel with an octane rating equivalent to a mixture of 98% isooctane and 2% n-heptane. Its advantages are summarized as "two highs and two lows": higher anti-knock performance and power output, along with lower harmful substances in the gasoline and reduced exhaust emissions.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.