What engine does the Mustang use?

Will There Be Abnormal Noise If the Shock Absorber Is Broken?

There will be abnormal noise if the shock absorber is broken. 1. Symptoms of a broken shock absorber: The shock absorber makes abnormal noises when the vehicle is driving on bumpy roads; when the vehicle is driving on bumpy roads, if it is found that the body posture is excessively bumpy and unstable; check the shock absorber through the wheel arch with a flashlight, and when it is found that there is oil leakage on the outside of the shock absorber. 2. Countermeasures: Generally, when abnormal noise is found in the car's shock absorber, it is most likely caused by damage to the shock absorber. At this time, the wheel on the side with the abnormal noise should be removed, and the appearance of the shock absorber should be carefully checked for integrity and oil leakage. At the same time, check whether there are foreign objects between the shock absorber sleeves. If no abnormalities are found, then it is necessary to go to a professional 4S store or repair shop for inspection and repair.

7

3

Share

How many points will be deducted for changing the color without updating the vehicle registration certificate?

Changing the color without updating the vehicle registration certificate will not result in point deductions but will incur a certain fine. Below is an extended introduction: 1. Legal provisions: 1) According to Article 10 of the "Regulations on the Registration of Motor Vehicles" issued by the Ministry of Public Security: If a registered motor vehicle has any of the following circumstances, the owner of the vehicle shall apply for a change of registration to the local vehicle management office. Among these, "changing the body color" is listed in the first paragraph of this article. 2) Additionally, according to Article 56, Item 5 of the "Regulations on the Registration of Motor Vehicles": Changing the body color, replacing the engine, body, or frame without applying for a change of registration within the time limit specified in Article 10 will result in a warning or a fine from the traffic management department of the public security authority. 2. Correct practice: If a registered motor vehicle undergoes a change in body color, the owner should apply for a change of registration at the local vehicle management office within ten days after the change.

12

2

Share

What Causes the Smell of Engine Oil Inside the Car?

Here are the specific reasons for the smell of engine oil inside the car: Overfilled Gasoline: Gasoline may flow into the carbon canister through the pipelines. The carbon canister, originally designed to collect gasoline vapors, will release excess gasoline vapors through the ventilation holes when invaded by liquid gasoline. When the air conditioning is in the external circulation mode, the smell of gasoline can enter the car. Gasoline Pipe Leakage: The smell of gasoline may enter the car through the air conditioning system. Leakage usually occurs at the connections between pipes. If there is leakage at the connection points, dust will accumulate on the surface, forming oil sludge, which can be observed when opening the engine compartment. Replacement or Disassembly of the Gasoline Pump: The smell of gasoline inside the car may be caused by residual substances not being cleaned thoroughly after disassembly or replacement. It is necessary to visit a repair shop to check if the gasoline pump is installed correctly.

10

5

Share

What are the differences between No. 5 spindle oil and No. 2 spindle oil?

No. 2 spindle oil and No. 5 spindle oil correspond to Skalan No. 2 spindle oil and Skalan No. 5 spindle oil respectively: They are both industrial equipment lubricating oils, mainly serving the purposes of lubrication and cooling. The difference between them is that No. 2 has lower viscosity while No. 5 has higher viscosity, with no other essential differences. The lower the viscosity, the better the fluidity. Below is an extended introduction: Spindle oil: Spindle oil is a low-viscosity spindle bearing oil (commonly known as spindle oil). The new industry standard classifies spindle oil under bearing oils, which are anti-oxidation, anti-rust, and anti-wear oils. It is formulated using deeply refined base oils and multifunctional additives, providing excellent performance and ideal protection for equipment. This product is divided into grades 2, 3, 5, 7, 10, 15, and 22 based on its kinematic viscosity at 40°C.

9

2

Share

Does the tire cord need to be lubricated?

Tire cord needs to be lubricated. The cords inside the tire are called tire cords. Related introduction: 1. Viscose cord: Fatigue-resistant, heat-resistant, and has good dimensional stability, but viscose cord has the disadvantage of being prone to moisture absorption and reduced strength after moisture absorption. Mainly used in radial passenger car tires. 2. Polyamide cord: High strength, good impact resistance and fatigue resistance, but poor dimensional stability and poor adhesion to rubber. When used, it must undergo dipping and heat stretching treatment to improve its dimensional stability and adhesion. Widely used in tires for trucks, aircraft, as well as in belts and hoses. 3. Polyester cord: High strength, large initial modulus, good thermal shrinkage and dimensional stability, but it generates high heat during fatigue, is prone to amination and hydrolysis, which reduces strength, and is difficult to bond with rubber. To improve adhesion, surface activation treatment and dipping are required. Widely used in passenger car tires. 4. Aramid cord: High strength and modulus, better high-temperature resistance and dimensional stability, but high cost and poor adhesion to rubber. Suitable for high-performance tires such as luxury cars, military vehicles, and aircraft.

1

Share

Which way to turn the steering wheel for right reverse parking?

When performing right reverse parking, the steering wheel should be turned based on the movement of the rear of the car. If you want the rear to move right, turn the steering wheel to the right; if you want it to move left, turn to the left, then straighten in the opposite direction. Introduction to reverse parking: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013. Content of reverse parking: It assesses the driver's ability to maneuver the vehicle in a confined space. Reverse parking is an assessment point in the driver's test, requiring the driver to correctly reverse the vehicle into a garage from both sides while in motion. Standards for reverse parking methods: There are three most common types of reverse parking. The first is the "non"-shaped reverse parking, commonly seen in large shopping malls. The second is the roadside "one"-shaped reverse parking, also known as parallel parking. The third is the less common diagonal reverse parking. 70% of driving school students find parallel parking more challenging.

10

5

Share

What engine does the Mustang use?

Will There Be Abnormal Noise If the Shock Absorber Is Broken?

How many points will be deducted for changing the color without updating the vehicle registration certificate?

What Causes the Smell of Engine Oil Inside the Car?

What are the differences between No. 5 spindle oil and No. 2 spindle oil?

Does the tire cord need to be lubricated?

Which way to turn the steering wheel for right reverse parking?

Is it necessary to install window chrome trim?

What is the default WiFi password for Buick cars?

What is the sequence of the driving test?

Can the driver's license medical examination be rescheduled?