What engine does the Mitsubishi Lancer use?

1 Answers
MacKhloe
07/29/25 11:48pm
The Mitsubishi Lancer is equipped with a 1.6L engine, model DA4G18. The DA4G18 engine has an actual displacement of 1584ml, with 4 cylinders arranged in an L-formation, and features natural aspiration. The engine specifications include a cylinder bore of 76mm, a stroke of 87.3mm, a compression ratio of 9.5, and a SOHC valve train. The Mitsubishi Lancer is a domestically produced sedan launched by Soueast Motors under the Mitsubishi brand, positioned between the Mitsubishi Galant in the market. The series includes four models: Comfort Manual, Comfort Automatic, Luxury Manual, and Luxury Automatic.
Was this review help?
19
2
Share
More Forum Discussions

What to Use to Remove Engine Oil Stains from Pants?

Alcohol can be used. Below is an introduction to engine oil: 1. Overview: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). 2. Function: It lubricates and reduces friction in the engine, aids in cooling, seals against leaks, prevents rust and corrosion, and provides shock absorption. 3. Additional Information: Often referred to as the 'blood' of a car, engine oil consists of base oil and additives. The base oil is the primary component of lubricants, determining their fundamental properties, while additives compensate for and enhance the base oil's performance, adding new characteristics and making them an essential part of lubricants.
12
0
Share

What level of vehicle is the XT4?

XT4 is a compact SUV under the Cadillac brand. More details about this vehicle are as follows: 1. It has a wheelbase of 2779 mm, with length, width, and height measuring 4600 mm, 1881 mm, and 1627 mm respectively. 2. It is a five-door, five-seat SUV model, and all variants of this car are equipped with a 2.0-liter turbocharged engine codenamed LSY. 3. The 2.0-liter turbocharged engine in the Cadillac XT4 delivers 241 horsepower and a maximum torque of 350 Nm, offering relatively strong climbing performance.
16
1
Share

Can a Car with Temporary License Plates Drive on Highways?

Vehicles with temporary license plates are permitted to drive on highways, provided that the temporary plates are displayed in the designated position, which is no different from driving with regular license plates. To apply for temporary plates, one of the following conditions must be met: 1. When driving from the vehicle purchase location to another place, temporary license plates must be obtained from the local vehicle management office at the purchase location. 2. If the vehicle is being transferred and the regular license plates have been surrendered, temporary plates must be obtained from the local vehicle management office to drive back to the original location. 3. For new vehicles in the local area that have not yet obtained regular license plates but need to be driven to another location for modifications, temporary plates must be obtained locally. After modifications are completed, temporary plates must be obtained at the modification location to drive back to the original area.
3
4
Share

What are the tips for B2 reverse parking?

Here are some tips for B2 reverse parking: 1. Parking position: The left side of the car must be parallel to line 1 and about 2 meters away from it, not less than 1.5 meters (if it is less than 1.5 meters, when turning the steering wheel to enter garage B, the front of the car is prone to cross line 1 due to the outward shift of the rear suspension); nor should it be more than 2.5 meters (if it is more than 2.5 meters, the horizontal distance between the right side of the car and the door of garage B decreases, the turning radius decreases, the distance for adjusting the direction shortens, making it more difficult to park, and the rear of the car is prone to cross the boundary line of garage B). 2. Timing of turning the steering wheel during reverse parking: When starting to reverse from point A, you can first turn the steering wheel half a turn to the right, keeping the car body slightly inclined towards the garage while reversing. When the rear of the car is about 1 meter away from the extended line of garage A (extended towards line 1), start turning the steering wheel to enter garage B (note: do not turn the steering wheel too early), meaning the car should turn in a more circular path.
8
0
Share

Is Baojun a Domestic or Joint Venture Car?

Baojun is a domestic car brand. It is an independent automobile brand established in 2010 by SAIC-GM-Wuling. The name 'Baojun' originates from the meaning of 'fine steed,' symbolizing people's most beloved horse. The vehicles produced under this brand utilize Wuling's branding, SAIC's technology, and GM's engines. Below is an introduction to the Baojun brand: 1. The trademark design of the Baojun brand aligns phonetically and visually with the brand name 'Baojun.' The main element of the brand logo is a 'horse head,' which conveys meaning through form, highlighting the creative integration of traditional Chinese elements with modern graphic design. This fully embodies the brand spirit of 'optimism, progress, reliability, and confidence.' 2. The classic shield-shaped emblem adopts the stable and firm structure commonly seen in international brands, subtly implying the reliable quality of its products and SAIC-GM-Wuling's determination to fully enter the mainstream passenger vehicle market.
10
2
Share

How many liters of engine oil should be added to a Mercedes-Benz C180?

According to official specifications, the Mercedes-Benz C180 requires 7 liters of engine oil. In practice, it is recommended to add slightly more than 7 liters, typically around 7.5 liters. Here are some details about the engine oil used in the Mercedes-Benz C180: 1. Gasoline engines operate at high speeds with relatively low loads, resulting in lower lubrication pressure, while diesel engines operate at lower speeds with higher loads, leading to higher lubrication pressure. These differences in performance requirements mean that engine oils are categorized into two types: gasoline engine oil and diesel engine oil, which should not be mixed. 2. Full synthetic oil offers excellent stability and durability, allowing for extended oil change intervals of 7,500 to 10,000 kilometers for engines using full synthetic oil. When turbocharging components are engaged, the engine torque increases significantly.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.