What engine does the Mitsubishi Lancer EX use?

Does the Kia Pegas have a hatchback version?

Kia Pegas does not have a hatchback version. Here are the relevant details: Introduction to Kia Pegas: The Kia Pegas is a compact sedan with body dimensions of 4300mm in length, 1700mm in width, and 1460mm in height, with a wheelbase of 2570mm. In terms of power, the Pegas is equipped with a 1.4L naturally aspirated engine across all variants, paired with either a 5-speed manual transmission or a 4-speed automatic AT transmission. The engine features DCVVT technology, delivering a maximum power output of 95 horsepower and a peak torque of 132 Nm at 4000 rpm. For configuration, the car comes with safety features such as airbags, rear parking sensors, safety controls, and an external sunroof. Kia Hatchback Models: Kia offers three hatchback models: the K2 Hatchback, the Cerato Eurostyle, and the imported Carens.

18

4

Share

What Causes Loud Engine Noise in Cars?

Loud engine noise in cars may be caused by aging engine mounts. With high mileage, the engine mounts can deteriorate, and replacing them can solve the problem. Carbon buildup can also lead to increased engine noise. If the engine sounds normal when heard from outside but feels excessively noisy inside the car, it indicates poor sound insulation. In this case, the vehicle's sealing strips should be checked for signs of aging. If the engine produces a dull, thumping sound during operation, it might be due to issues with the cylinder valves. This sound often disappears when driving at high speeds, which strongly suggests a problem with the cylinder valves. Additionally, oil pressure should be checked to rule out any related issues.

20

2

Share

What does a faucet-like symbol on the car mean?

A faucet-like symbol on the car is the engine malfunction indicator light. If this light illuminates while driving, it may indicate that the engine is experiencing poor combustion conditions, engine knocking, poor fuel quality, dirty engine cylinders with carbon deposits, or unavailable computer data. The engine status indicator light: it turns on when the ignition is switched on and should go off after about 3 to 4 seconds. If it does not light up or does not turn off, it indicates an engine fault that requires immediate repair. When a malfunction indicator light on the car's instrument cluster illuminates, it means that the component represented by that light has an abnormality or fault. However, the exact cause of the fault cannot be determined without a professional diagnostic tool, so it's necessary to visit a 4S shop for a professional diagnosis.

7

5

Share

What are the correct steps for starting and parking an automatic transmission car?

The correct steps for starting an automatic transmission car are: 1. Press the brake and shift to N gear, then start the car; 2. Shift from N gear to D gear; 3. Release the handbrake, then lift your foot off the brake pedal to start moving. The steps for parking are: 1. When parking, first press the brake, then firmly pull the handbrake; 2. Shift the gear to P; 3. Slowly release the brake pedal and then turn off the engine. Explanation of automatic transmission gears: P stands for Parking gear, also used when starting; R stands for Reverse gear; N stands for Neutral gear; D stands for Drive gear, also known as the driving gear; L stands for Low gear; S stands for Sport mode, when shifted into this gear, the gear can be freely switched; OD stands for Overdrive gear, used during high-speed driving.

18

1

Share

What Causes the ETC Light to Illuminate?

ETC light illumination can be attributed to: 1. Malfunction of the vehicle's computer; 2. Depleted battery in the odometer, requiring replacement; 3. Aged fuses in the fuse box, necessitating a new fuse. When the ETC light is on, it is crucial to inspect the sensors in various parts of the vehicle for proper functionality. A diagnostic tool can be used to check for fault codes, often pointing to components such as the throttle body, spark plugs, or exhaust gas valve. ETC is an abbreviation that typically stands for three terms: Electronic Throttle Control, Electronic Temperature Control, or Traction Control System. Vehicle fault indicator lights are categorized into fault warning lights and reminder indicator lights. Fault warning lights are red, indicating a severe malfunction or critical warning that requires immediate attention. Reminder indicator lights are yellow, signaling issues that, while not urgent, should not be ignored as they indicate existing problems.

12

2

Share

What brand is the Beijing Hyundai Elantra's transmission?

Beijing Hyundai Elantra's transmission brand is Aisin Warner 6AT from Japan. Here are the relevant details: Introduction to Hyundai Elantra's transmission: The transmission of Beijing Hyundai Elantra is Aisin Warner 6AT from Japan, offering two engine options: 1.6L and 1.4T. However, the main focus is on the 1.6L naturally aspirated engine, with a power output of 95.3kw and torque of 157nm. Function of the transmission: It changes the gear ratio between the engine and the wheels, allowing the engine to operate under optimal conditions. It expands the torque and speed transmitted from the engine to the driving wheels, achieving different speeds. It enables the car to reverse and also provides a neutral gear setting.

5

1

Share

What engine does the Mitsubishi Lancer EX use?

Does the Kia Pegas have a hatchback version?

What Causes Loud Engine Noise in Cars?

What does a faucet-like symbol on the car mean?

What are the correct steps for starting and parking an automatic transmission car?

What Causes the ETC Light to Illuminate?

What brand is the Beijing Hyundai Elantra's transmission?

What transmission does the Dongfeng Fengshen AX7 use?

What is the pressure of a car air conditioner?

Is the Trax equipped with a three-cylinder engine?

Why does the car shake when in D gear?