What engine does the MG GS use?

How Long Can a Car with Oil Burning Continue to Run?

When experiencing oil burning, the car can generally continue to run as long as there is sufficient oil in the engine. However, if the oil burning is severe, it is recommended to perform repairs as soon as possible, as this can both save on oil consumption and protect the components. The decision to repair an oil-burning car can be based on the severity of the issue. Normal oil consumption is typically around 0.5L per 1000 kilometers or less. If the consumption exceeds this value, repairs are necessary. Causes of oil burning in cars: 1. Valve seals: Valves are designed to prevent oil from leaking into the combustion chamber, but over time, they can wear out and age, leading to poor sealing and allowing oil to enter the combustion chamber. 2. Piston clearance: After prolonged operation, carbon deposits can form on the pistons, and wear can also occur. Over time, the piston clearance increases, making it easier for oil to enter the combustion chamber. This is why it is often recommended to switch to a higher viscosity oil as the vehicle ages. 3. Oil viscosity: If the oil viscosity is too low, oil burning can also occur. Low-viscosity oil has better fluidity, making it easier to seep into the cylinder and participate in combustion. 4. Oil quantity: If there is too much oil, the oil pressure can become excessive, forcing some oil into the cylinder and resulting in oil burning.

9

1

Share

How to Solve Fogging on Car Windows in Summer?

You can use a clean cloth to wipe off the fog on the windows; adjust the car window button to leave a small gap, reducing the temperature difference to prevent fogging; you can also use the car's air conditioning system to defog, or use a detergent mixture method to remove fog. Here are some additional tips: 1. Proper use of the air conditioning system: First, turn on the recirculation mode to prevent outside moisture from entering the car, then turn on the air conditioning to lower the humidity inside the car. Depending on the situation, activate the front or rear window defogging mode, set the fan speed to maximum, and the temperature to the lowest setting for quick defogging. 2. Specialized anti-fog products: Spray evenly on the windows and wipe clean before each use to form a transparent protective film that prevents fogging. One application can last about 10 to 15 days, depending on the product's effectiveness. Buying anti-fog spray is a convenient but not cost-effective solution, as its effects are short-lived. 3. Leave a small gap in the window: If the fog is not heavy, you can open a small gap on both sides of the windows to allow air circulation inside the car. This will gradually equalize the temperature inside and outside the car, causing the fog to dissipate. The advantage is that it achieves the same effect as using the air conditioning without increasing fuel consumption. However, during winter or rainy days, it is recommended to intermittently open and close the windows.

14

4

Share

Can a Class C License Drive a 9-Seater Business Vehicle?

C1 license holders can drive small passenger vehicles with 9 seats or fewer (including 9 seats), light and small cargo vehicles with a total mass of 4,500 kg or less (including 4,500 kg), a vehicle length of 6 meters or less (including 6 meters), and an approved load capacity of 1,500 kg or less (including 1,500 kg). Traffic police verification is based on the vehicle registration certificate (must be a small vehicle). The specific vehicle types that a C1 license can drive and the regulations on how many seats a C1 license can drive are as follows: 1. Vehicles with blue license plates: Generally, small vehicles with blue license plates can be driven with a C1 license. 2. Manual or automatic transmission minivans or business vehicles with 9 seats or fewer (including 9 seats): A C1 license can also drive these. Vehicles with more than 9 seats cannot be driven, even if they have blue license plates. 3. All small automatic or manual transmission cars: A C1 license can drive these, as they are the basic vehicles permitted for a C1 license. Light, small, and micro special-purpose operation vehicles can also be driven with a C1 license, but these require approval from relevant departments. 4. General light and micro cargo vehicles under 1.5 tons: A C1 license can drive these, provided the total length of the vehicle does not exceed 6 meters. 5. New regulation: As of 2017, a C1 license does not permit riding motorcycles.

7

5

Share

Is the Free Maintenance Provided by 4S Stores Nationwide Applicable?

If the free maintenance provided by the 4S store is the first maintenance or others listed in the maintenance manual, it is generally a gift from the manufacturer to the car owner, and thus can be used nationwide. As long as you bring the vehicle's invoice and maintenance manual, you can go to any 4S store of the same brand nationwide for maintenance. However, in other cases, it may be a sales promotion by the 4S store and cannot be used nationwide; it must be used at the 4S store where the car was purchased. Relevant information about 4S maintenance is as follows: 1. Free maintenance provided by the 4S store does not cost money: If the 4S store clearly lists the free maintenance items as gifts, no payment is required. However, after maintenance at the 4S store, the after-sales staff may generally recommend the car owner to undertake some other non-free projects. 2. What does the 4S store's offer of three years and six free maintenance services include: It generally includes conventional engine oil and oil filters, such as oil pan plugs (gaskets), air filters, fuel filters, cabin air filters, spark plugs, and corresponding labor costs. More formal 4S stores, when selling cars, may offer such packages. Therefore, in cases where the car is not driven frequently or the mileage is relatively short, the car owner can choose to go for regular maintenance.

13

0

Share

Are private cars under 10 years old inspected every two years?

Private cars under 10 years old are inspected every two years. According to the new vehicle inspection regulations implemented from November 20, 2020, new vehicles within 6 years can be exempted from inspection twice (inspection labels need to be applied for every two years, but no on-site inspection is required). At the 6th and 8th years, vehicles must undergo on-site inspection. For private cars over 10 years old, the original inspection cycle still applies, i.e., annual inspection for vehicles aged 10 to 15 years, and semi-annual inspection for vehicles over 15 years old. Below is additional information: 1. Relevant regulations: Article 13 of the Road Traffic Safety Law of the People's Republic of China stipulates that motor vehicles registered for road use shall undergo regular safety technical inspections according to laws, administrative regulations, and based on factors such as vehicle purpose, passenger and cargo capacity, and service life. Upon submission of the vehicle's driving license and compulsory third-party liability insurance policy, the motor vehicle safety technical inspection institution shall conduct the inspection, and no additional conditions may be imposed by any unit. 2. Conditions for the six-year exemption from inspection: (1) The vehicle has been involved in a traffic accident causing casualties; (2) The vehicle has been legally penalized for illegal modifications; (3) The vehicle has not been registered within 4 years from the date of manufacture.

11

0

Share

Why Do You Need to Press the Clutch When Braking?

If you brake without pressing the clutch, the wheels are forced to stop rotating, and the resistance is transmitted to the engine through the drivetrain. The engine cannot overcome such a large resistance and will stop working, i.e., stall. Below are the functions of the clutch: 1. Facilitates car starting: Before the car starts, it is stationary. Since the engine and transmission are rigidly connected, once a gear is engaged, the car will suddenly surge forward due to the abrupt connection of power. This not only causes damage to mechanical components but also makes the driving force insufficient to overcome the huge inertia generated by the sudden forward movement, causing the engine speed to drop sharply and stall. 2. Reduces torsional vibration impact: The output torque of a car engine is usually unstable. During the operating stroke, the inertia of the engine's rotating system can reduce torsional vibration, but the remaining impact still adversely affects the subsequent transmission and driveshaft. The damping springs in the clutch can significantly reduce the torsional vibration impact from the engine, extending the lifespan of the transmission gears. 3. Prevents excessive pressure on the drivetrain from causing damage: During emergency braking, the wheels suddenly decelerate sharply, while the drivetrain connected to the engine maintains its original speed due to rotational inertia. This often generates an inertia torque in the drivetrain far greater than the engine torque, making the drivetrain components prone to damage.

9

1

Share

What engine does the MG GS use?

How Long Can a Car with Oil Burning Continue to Run?

How to Solve Fogging on Car Windows in Summer?

Can a Class C License Drive a 9-Seater Business Vehicle?

Is the Free Maintenance Provided by 4S Stores Nationwide Applicable?

Are private cars under 10 years old inspected every two years?

Why Do You Need to Press the Clutch When Braking?

What is the ideal distance from the side line when reversing into a parking space?

What should I do if there are cracks along the sidewall of the tire?

Turn Signal: Light Tap or Full Push?

Where is the Cabin Air Filter Located in BAIC Senova?