What engine does the Mazda CX-4 have?

1 Answers
ChristopherRose
07/29/25 1:58pm
The Mazda CX-4 is equipped with a Skyactiv-G 2.0L or 2.5L naturally aspirated engine, paired with a 6-speed manual or 6-speed automatic transmission. The 2.0L engine delivers a maximum power of 116kW and a maximum torque of 202Nm, while the 2.5L engine produces a maximum power of 141kW and a maximum torque of 252Nm. The Mazda CX-4 is a compact coupe SUV with body dimensions of 4637mm in length, 1855mm in width, 1524mm in height, and a wheelbase of 2700mm. It features a front MacPherson strut independent suspension and a rear E-type multi-link independent suspension, both equipped with stabilizer bars.
Was this review help?
17
0
Share
More Forum Discussions

How to Modify Anti-Lag System?

Modifying an anti-lag system is not recommended. Here are the details: 1. To install an anti-lag system in a family car, the ECU needs to be reprogrammed to allow the fuel injection system to continue spraying fuel when the throttle is released. However, modifying anti-lag ignition for family cars is illegal. Anti-lag systems are only feasible in turbocharged vehicles, commonly used in racing cars. 2. Anti-lag works by stopping the ignition action when lifting off the throttle during gear shifts, intentionally allowing the air-fuel mixture to enter the exhaust manifold. The extremely high temperature in the manifold causes the mixture to explode upon contact, generating powerful explosion pressure that drives the turbine's exhaust blades. This, in turn, spins the turbocharger's compressor wheel at high speed, maintaining boost pressure even during low-speed driving or throttle-off gear shifts. 3. The anti-lag system was developed to reduce turbo lag. Most family turbocharged cars use small-inertia turbos to achieve quick spool-up, making them unsuitable for anti-lag modifications. If a family car is to be equipped with an anti-lag system, a larger turbo must be installed. However, modifying the stock turbo with an anti-lag system can easily cause damage.
4
4
Share

What is the fuel consumption of the old Cruze?

Discontinued models can be considered as old versions. According to data from Xiaoxiong Youhao: 1. Equipped with a 1.6L-121 horsepower L4 engine and a 5-speed manual transmission, the average fuel consumption is 7.97 liters/100km, with a range of 6.92~9.01 liters/100km, based on tests from 2,745 owners. 2. Equipped with a 1.6L-117 horsepower L4 engine and a 5-speed manual transmission, the average fuel consumption is 8.57 liters/100km, with a range of 7.41~9.73 liters/100km, based on tests from 3,104 owners. 3. Equipped with a 1.6L-184 horsepower L4 engine and a 6-speed manual transmission, the average fuel consumption is 8.95 liters/100km, with a range of 7.71~10.20 liters/100km, based on tests from 245 owners. 4. Equipped with a 1.6L-117 horsepower L4 engine and a 6-speed automatic manual transmission, the average fuel consumption is 10.10 liters/100km, with a range of 8.66~11.54 liters/100km, based on tests from 533 owners. 5. Equipped with a 1.8L-143 horsepower L4 engine and a 6-speed automatic manual transmission, the average fuel consumption is 10.22 liters/100km, with a range of 8.75~11.70 liters/100km, based on tests from 716 owners.
3
2
Share

What to Do When Alcohol Causes White Spots on Car Interiors?

The reasons and solutions for white spots appearing on car interiors after spraying alcohol are as follows: 1. Reasons: Medical alcohol containing 75% ethanol, which is effective for disinfection, can have a corrosive effect on genuine leather car interiors. Additionally, besides genuine leather interiors, chrome-plated and painted areas inside the car may also fade due to alcohol corrosion. 2. Solutions: (1) Car owners should avoid wiping these areas when cleaning with alcohol. (2) If alcohol is accidentally used to wipe genuine leather interiors, the best approach is to visit a professional leather care shop for leather repair to avoid worsening the situation with improper DIY fixes. (3) Furthermore, for whitened areas on the dashboard after alcohol cleaning, car owners can purchase dashboard spray paint or visit a beauty shop for wax repair.
18
3
Share

What Does the Car Warranty Cover?

The car warranty covers a wide range of issues. As long as the faults or part damages occur under normal usage conditions as specified, the manufacturer will provide free repairs or replacement of corresponding parts for the car owner. Below is a detailed introduction to the car warranty: 1. Many car advertisements promote the longest warranty period, but different components have different warranty periods. Consumers should especially pay attention to the warranty period and conditions for consumable parts. Many manufacturers specify in the vehicle manual that consumable and wear-and-tear parts are not covered under warranty unless they are due to quality issues. Generally, the warranty period for the engine and transmission is the same as the overall warranty period, while consumable parts like the battery, air filter, cabin air filter, and timing belt have much shorter warranty periods. 2. The Maintenance Manual usually clearly states that consumable parts such as wiper blades, brake pads, clutch discs, tires, headlights, and glass are not covered under warranty. After purchasing a new car, it is essential to carefully read the accompanying Warranty Manual. In addition to specifying the warranty periods for various components, almost all car models' Maintenance Manuals impose conditions on the warranty. In special circumstances, the car owner may not be eligible for free warranty services.
7
2
Share

What Happens When a Car Engine Runs Out of Oil?

If a car engine runs out of oil, it is highly likely to experience burning of the crankshaft and bearing shells. Without the lubrication provided by the oil, the engine's components will inevitably rub against each other and sustain damage. Additionally, the absence of cooling effects means that during high-speed operation, the engine may suffer from burning of the crankshaft and bearing shells. Below is relevant information: Engine dry burning can be caused by the following two situations: 1. Lack of oil: If caused by insufficient oil, it will not only wear out engine components but also lead to severe consequences such as burning of the crankshaft and bearing shells, or even complete engine failure. In such cases, the only solution is to replace the damaged parts. 2. Lack of coolant: If caused by insufficient coolant, the engine will naturally fail to cool effectively. The remedial measure in this situation is to promptly cool the engine and replenish the coolant. Do not continue driving when the coolant is low, as this can easily result in engine cylinder scuffing and even damage to the car's bearing shells and piston rings.
7
4
Share

Is it better to use higher or lower viscosity oil for burning oil?

Whether it's better to use higher viscosity oil for burning oil in cars depends on specific situations. Here's a detailed explanation: 1. Burning oil is also a lubricant. The viscosity grade of the lubricant is crucial for the normal operation of the engine. To prevent wear on the contact surfaces between moving parts of the engine, the lubricant must have sufficient viscosity to form an oil film between moving parts under various operating temperatures, ensuring smooth operation of the truck engine. However, using lubricants with excessively high viscosity can also have some drawbacks. The methods for selecting the appropriate lubricant are as follows: 2. For heavy loads, choose oil with higher viscosity and good oiliness or extreme pressure properties; for light loads, choose oil with lower viscosity; in situations with significant impact, also choose oil with higher viscosity and good extreme pressure properties. 3. For high-speed movements, choose low-viscosity oil; for low-speed components, oil with slightly higher viscosity can be selected, but for oils with anti-wear additives, excessive emphasis on high viscosity is unnecessary. 4. Temperature is divided into ambient temperature and operating temperature. For low ambient temperatures, choose lubricants with lower viscosity and pour point (or freezing point), and vice versa; for high operating temperatures, choose lubricants with higher viscosity, flash point, and good oxidation stability, or even solid lubricants; for large temperature variations, choose lubricants with good viscosity-temperature characteristics (high viscosity index). 5. For environments with high humidity and frequent contact with water, choose lubricants with strong anti-emulsification properties and good oiliness and rust prevention. 6. For car engines with significant wear, generally, the viscosity index of the oil at 100°C should be selected one level higher to thicken the oil film, which can help reduce noise to some extent.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.