What engine does the Lifan Maiwei use?

1 Answers
NaomiFitz
07/29/25 12:11am
Lifan Maiwei uses a 1.5L naturally aspirated engine and a 1.8L naturally aspirated engine. The 1.8L naturally aspirated engine delivers 133 horsepower and a maximum torque of 168 Nm, with a maximum torque speed range of 4200 to 4400 rpm and a maximum power speed of 6000 rpm. This engine is paired with either a 5-speed manual transmission or a 5AT transmission. The Lifan Maiwei is a compact SUV under the Lifan brand, with body dimensions of 4480mm in length, 1770mm in width, and 1730mm in height. In terms of suspension, the front suspension of the Lifan Maiwei uses a MacPherson independent suspension, while the rear suspension employs a rear guide rod-type non-independent suspension.
Was this review help?
12
3
Share
More Forum Discussions

What to Do When There's a Layer of Frost on the Windshield?

When there is a layer of frost on the car windshield, simply start the car and wait for the engine to warm up. Then, adjust the air conditioning to direct airflow toward the windshield. After a few minutes, cracks will begin to appear in the frost. At this point, using the windshield wipers along with windshield washer fluid can quickly remove the frost. Additional Tips: 1. After using the car for the day, do not immediately lock the car and leave. Instead, open both doors to allow ventilation until the interior temperature drops to match the outside temperature before locking the doors and leaving. The next morning, there will definitely be no frost on the windshield. Even if it snowed the night before, simply brushing off the snow from the windshield will prevent ice formation, allowing you to drive immediately. 2. The reason the windshield ices over is that after the occupants leave, residual heat inside the car keeps the windshield temperature higher than the outside. This causes moisture in the air or snowflakes to melt upon contact with the windshield. Once the interior and exterior temperatures equalize, the melted snow begins to freeze.
15
1
Share

How to open the Nissan Qashqai trunk from the inside?

Methods to open the Nissan Qashqai trunk from the inside: 1. There is no switch button in the Qashqai's cabin. The owner needs to get out of the car and press the button on the trunk to open it. 2. Alternatively, press the trunk opening button on the car key, or simply press the unlock button to release the trunk. Here is some relevant information about the Nissan Qashqai trunk: 1. The trunk capacity of the Qashqai ranges from 352 to 1513L, offering strong space expandability. Under normal circumstances, the trunk volume is only 352L, which is less than that of a typical compact sedan. However, thanks to its taller body and larger trunk opening, the Qashqai can easily accommodate larger items. 2. It is recommended that owners install a trunk mat. The car trunk serves as a storage compartment for miscellaneous items. A trunk mat can effectively protect the trunk, preventing dirt or liquids from entering and damaging the trunk surface, and it also helps keep items in the trunk from sliding.
10
5
Share

Where is the fuel tank cover switch for the 12 Sagitar?

The fuel tank cover switch for the 12 Sagitar is located on the right side of the vehicle body. Press the fuel tank cover lightly when the vehicle is unlocked to open it. Below is an introduction to the Sagitar: 1. Vehicle Positioning: The Sagitar is a joint venture A+ class sedan brand under FAW-Volkswagen, a compact car from Volkswagen. 2. Configuration: All models come standard with integrated high/low beam LED headlights. High-end models feature a grille ambient light design, along with MDFS intelligent dynamic headlight assist system and AFS headlight steering system. 3. Interior: The interior combines soft-touch materials and piano black lacquer panels. High-end models are equipped with a 10.2-inch Active-Info-Display dashboard and an 8-inch multimedia screen, angled toward the driver's side, supporting Apple Carplay connectivity. Lower-end models do not include a multimedia screen, and the air conditioning panel uses touch-sensitive buttons. Mid to low-end models are equipped with traditional mechanical pointer dashboards.
18
5
Share

How to Check the Tire Pressure on the Cruze?

To check the tire pressure on the Cruze, press the button at the top of the left-hand steering column stalk to switch to the tire pressure display. Below is some relevant information: 1. The Cruze is a compact sedan under the Chevrolet brand, equipped with two engine options: a 1.0-liter turbocharged engine and a 1.3-liter turbocharged engine. 2. The 1.0-liter turbocharged engine delivers 125 horsepower and a maximum torque of 170 Nm, with a maximum power output at 5,600 rpm and peak torque available between 2,000 and 4,000 rpm. This engine features multi-point fuel injection technology and an aluminum cylinder head and block. It is paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission. 3. The 1.3-liter turbocharged engine produces 163 horsepower and a maximum torque of 230 Nm, achieving maximum power at 5,500 rpm and peak torque between 1,800 and 4,400 rpm. This engine also utilizes multi-point fuel injection and an aluminum cylinder head and block, mated to a 6-speed automatic transmission.
2
4
Share

Where is the fuel tank button of the Lavida?

The fuel tank switch of the Lavida is located on the left side of the fuel tank cover. The fuel tank cover is linked with the central locking system. After unlocking the central lock, press the fuel tank cover to open it. Introduction to the Lavida: 1. Body dimensions: The length, width, and height are 4605 mm, 1765 mm, and 1460 mm respectively, with a wheelbase of 2610 mm. 2. Powertrain: It is equipped with three engines, namely a 1.2-liter turbocharged engine, a 1.4-liter turbocharged engine, and a 1.5-liter naturally aspirated engine. The 1.2-liter turbocharged engine has a maximum power speed of 5000 rpm and a maximum torque speed range of 2000 to 3500 rpm; the 1.4-liter turbocharged engine has a maximum power speed of 5000 rpm and a maximum torque speed range of 1750 to 3000 rpm; the 1.5-liter naturally aspirated engine has a maximum power speed of 6000 rpm and a maximum torque speed of 3900 rpm.
7
3
Share

What is the difference between Mercedes-Benz C and Mercedes-Benz E?

The differences between the Mercedes-Benz C-Class and E-Class are as follows: 1. Different positioning: The Mercedes-Benz C-Class is only the entry-level luxury model in the Mercedes-Benz brand; while the E-Class is the main mid-to-large luxury sedan under Mercedes-Benz. 2. Different exterior and interior design: The exterior and interior design of the Mercedes-Benz C-Class are more youthful; while the E-Class tends to focus more on creating a luxurious atmosphere to highlight the elegance of a mid-to-large luxury sedan. 3. Different powertrains: As an entry-level model, the Mercedes-Benz C-Class has three variants—C180, C260, and C300—equipped with 1.6T, 1.5T+48V mild hybrid, and 2.0T powertrains, respectively. On the other hand, the E-Class has five variants—E200, E260, E300, E350, and E320—equipped with 2.0T low power, 2.0T low power+48V mild hybrid, 2.0T, 2.0T high power+48V mild hybrid, and 3.0T V6 powertrains, respectively.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.