What engine does the Lifan Maiwei use?

1 Answers
VonSkylar
07/25/25 12:12am
Lifan Maiwei uses two engines in total, one is a 1.5-liter naturally aspirated engine, and the other is a 1.8-liter naturally aspirated engine. More details about the Lifan Maiwei are as follows: 1. The Maiwei is a compact SUV under Lifan, with a wheelbase of 2720 mm, and its length, width, and height are 4480 mm, 1770 mm, and 1730 mm respectively. 2. The 1.8-liter naturally aspirated engine of the Lifan Maiwei has a maximum torque of 133 horsepower and 168 Nm. The maximum torque speed of this engine is 4200 to 4400 rpm, and the maximum power speed is 6000 rpm. 3. The 1.5-liter naturally aspirated engine of the Lifan Maiwei has a maximum torque of 109 horsepower and 145 Nm. The maximum torque speed of this engine is 3500 to 4200 rpm, and the maximum power speed is 5800 rpm.
Was this review help?
17
2
Share
More Forum Discussions

Where is the windshield washer button located?

The windshield washer button is located on the right side of the steering wheel, integrated with the wiper control. Pull it towards the steering wheel for three seconds to spray washer fluid. Here are the detailed operation methods: 1. On the right control stalk of the steering wheel, pulling it towards the steering wheel direction will spray windshield washer fluid, which is used for cleaning the windshield. 2. Windshield washer fluid, commonly known as glass water, possesses multiple functions including cleaning, antifreeze, antifog, antistatic, and lubrication properties, playing a significant role in enhancing driving safety. 3. It can quickly remove stubborn dirt, oil stains, and other contaminants from the windshield while forming a protective film to prevent dust and grease buildup. This ensures smoother and quieter wiper operation, maintains cleaner and more comfortable visibility, preserves a broad and clear driving view, and gently protects the wiper blades.
13
0
Share

What is the battery model for the seventh-generation Honda Accord?

7th-generation Honda Accord battery model is 12V60AH550A. Below are the specific details about the battery: 1. The battery is also known as a storage battery. A storage battery is a type of battery that works by converting chemical energy into electrical energy. Typically, cars use lead-acid batteries, which are made of lead and oxides, with sulfuric acid solution as the electrolyte. 2. The battery is a secondary battery, meaning it can be recharged after discharge for continued use. 3. Storage batteries are divided into conventional batteries and maintenance-free batteries. Conventional batteries require periodic replenishment of distilled water to maintain normal operation. They are cheaper but have a shorter lifespan. 4. Maintenance-free batteries have very minimal electrolyte consumption, so they rarely require distilled water replenishment. Compared to conventional batteries, they have a longer service life.
2
0
Share

What is the correct method for replacing brake fluid?

When it is necessary to replace the brake fluid, the correct method for replacing brake fluid involves the following steps: 1. Park the vehicle on a flat surface, turn off the engine, and open the hood. Use a syringe to extract the fluid from the reservoir until it is empty. 2. Fill the reservoir with new brake fluid. When pouring the brake fluid, use a funnel as much as possible to avoid spilling it onto the engine compartment, as brake fluid is corrosive. 3. Use a jack to lift the vehicle, starting with the rear wheels, and remove the tires. 4. Locate the bleeder screw on the brake caliper and remove the rubber dust cap. 5. Use a wrench to loosen the bleeder screw, attach a rubber hose to it, and connect the other end to a drain bottle. 6. Begin pumping the brake pedal, then stop and reinstall the tire. Repeat this process for the remaining three tires. 7. The brake fluid reservoir has upper and lower level marks; if needed, add new brake fluid appropriately.
15
5
Share

How to Repair a Burst Brake Hose?

When the brake hose of a car is leaking, pull over and turn off the engine. Below are detailed steps for repairing a leaking brake hose: 1. If the brake hose is leaking, pull over and turn off the engine, then use soap and a cloth strip to plug the leak. After plugging, find the nearest repair shop for professional service or call for roadside assistance. 2. Small crack in the brake hose: If the crack is minor, clean the area, apply soap, and cover it with a cloth strip or tape, then secure it with wire or string. 3. Broken brake hose: If the hose is broken, connect it with a hose of similar diameter and secure it with wire, then proceed to a repair shop immediately. 4. Leak at the brake hose connection: If there's a leak at the connection, temporarily plug it with chewed gum and head to a repair shop immediately.
6
5
Share

Under What Circumstances Is Wheel Alignment Necessary?

When wheel alignment is required, there are several situations: 1. Generally, vehicles must undergo wheel alignment every 20,000 kilometers or once a year (whichever comes first). 2. If you need to grip the steering wheel tightly to keep the car from veering when driving straight on a flat road, it indicates the need for wheel alignment. 3. If you feel the car body floating or swaying during normal driving, as if turning or driving on rough roads, it also suggests the need for wheel alignment. 4. When one side of the front or rear tires wears out significantly more than the other, wheel alignment is necessary. 5. If the car pulls to the left or right when driving straight, it indicates the need for wheel alignment. 6. After replacing new tires or following repairs due to collision accidents, steering, or suspension system maintenance, it is advisable to perform wheel alignment. 7. New cars should undergo wheel alignment after driving approximately 3,000 kilometers.
12
4
Share

How to turn off the engine with a keyless entry system?

The method to turn off the engine with keyless start is: After parking the car, shift the gear to P position and press the start button. The following are the functions of the key: 1. After turning off the engine, the windows will automatically rise and close; 2. Convenient for finding the car in the parking lot; 3. Automatically open the trunk; 4. Remote window opening. Precautions for using the key are: 1. Do not place it together with electronic devices; 2. Do not expose the key to high temperatures or direct sunlight; 3. Do not use batteries with different power levels. The method to replace the key battery is: 1. Take out the car key; 2. Insert a flat-head screwdriver into the gap on the side of the key to open the key cover; 3. Take out the battery and replace it.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.