What engine does the Landwind X7 use?

1 Answers
OPenelope
07/30/25 6:10am
The engine of the Landwind X7 is provided by Shenyang Aerospace Mitsubishi and is a domestically produced engine. The 1.5T version of the Landwind X7 uses the engine model JX4G15B5L, with a maximum power of 120kW and a maximum torque of 250Nm. The 1.5T version also has another engine model, 4G63S4T, with a maximum power of 140kW and a maximum torque of 250Nm. For the daily maintenance of the Landwind X7's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
5
1
Share
More Forum Discussions

Which date determines the reset of demerit points on a driver's license?

The reset time for demerit points on a driver's license is based on the issuance date indicated on the license. Scoring cycle and point clearance method: The cumulative scoring cycle for road traffic safety violations is 12 months, with a maximum of 12 points. The cycle starts from the date the motor vehicle driver's license is initially issued and repeats continuously in this manner. If the demerit points accumulated within one scoring cycle do not reach 12 points, the scoring system will automatically reset the points from the previous cycle at the start of the next scoring cycle. Methods for handling demerit points: Drivers who accumulate 12 points must attend a study session and take an exam at the vehicle management office where the license was issued or at the vehicle management office where the violation occurred. Only after passing the subject one exam can the points be reset. Otherwise, the driver's license cannot be used normally. If the points do not reach 12 within one scoring cycle, driving is not affected, but the corresponding fine must be paid. After the fine is paid, the system will automatically reset the points at the start of the next scoring cycle.
9
4
Share

What Causes the Abnormal Noise at Idle in a Manual Transmission That Disappears When the Clutch is Depressed?

Manual transmission idle abnormal noise that disappears when the clutch is depressed is caused by a faulty transmission bearing, where the release bearing becomes loose or detached, resulting in vibration. Below is a detailed introduction to the car clutch: 1. Working Principle: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power from the engine to the transmission. 2. Basic Requirements: The clutch is a common component in mechanical transmissions, allowing the transmission system to be separated or engaged at any time. Its basic requirements include: smooth engagement, rapid and thorough separation; ease of adjustment and repair; compact size; lightweight; good wear resistance and sufficient heat dissipation capacity; easy and effortless operation. Clutches are divided into two categories: jaw-type and friction-type.
14
3
Share

Can LED lights pass the annual inspection?

Whether LED headlights can pass the annual inspection depends on the specifications and performance of the modified headlights. If the color temperature, brightness, and beam angle of the modified headlights meet the national safety requirements for driving, they can pass the inspection. There are two main aspects to check: Whether the brightness meets the requirement, which means the brightness must not be less than 1400 lumens. Whether the beam angle is up to standard, as long as the high and low beam angles are normal. Essentially, as long as the modified LED headlights do not affect driving safety, they can pass the inspection. Relevant regulations for vehicle annual inspection: Vehicles that fail the inspection must be repaired within a specified period. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not undergo the inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership. Vehicles that meet the scrapping conditions or exceed the prescribed service life will not be inspected, and their license plates will be revoked, their files canceled, and they will be scrapped.
9
2
Share

How to Deal with Scratches Down to the Primer?

If it's just a light scratch with some faint black marks on the paint that haven't reached the primer, take a clean towel and quickly rub off the black marks with some force. The solution is to purchase paint online that matches your car's color and spray it according to the instructions. In this case, the best approach is to use your insurance to have it professionally repaired at a 4S shop, ensuring the repair quality is generally problem-free.
16
1
Share

How many months in advance can a driver's license be renewed?

A driver's license can be renewed three months before its expiration date. According to relevant regulations, the motor vehicle driver should apply for renewal at the vehicle management office of the issuing authority within 90 days before the expiration of the motor vehicle driver's license. When applying, the "Motor Vehicle Driver's License Application Form" must be filled out. Renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other permitted vehicle-type driver's licenses must have fewer than 12 demerit points in the current scoring cycle; holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses with demerit points in a scoring cycle, as well as holders of other permitted vehicle-type driver's licenses involved in a traffic accident resulting in death and bearing equal or greater responsibility without having their motor vehicle driver's license revoked. For those who have completed the inspection education: The applicant must have no pending road traffic safety violations or traffic accidents; the applicant's physical condition must meet the driving permit requirements; the motor vehicle driver's license must not be under circumstances of being legally seized, detained, temporarily suspended, revoked, canceled, or annulled.
1
1
Share

What does 'inside' mean on tires?

On car tires, 'INSIDE' indicates the inner side, serving as a directional marking for tire installation. Below are specific methods for tire maintenance: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should neither be too high nor too low; always inflate according to the vehicle's specified pressure. In summer, try to keep the pressure slightly lower. In winter, ensure tires have slightly higher pressure than in summer due to thermal expansion and contraction. 2. Inspect wear patterns: Some vehicles may experience uneven tire wear. Frequently check the inner side of tires for abnormal wear, focusing on whether tread depths on both sides are consistent. 3. Promptly remove foreign objects: Debris in tire treads poses potential hazards and may eject during driving. Strive to keep tires clean. 4. Schedule regular wheel alignment: If the vehicle pulls to one side or exhibits abnormal steering, perform wheel alignment promptly to prevent further tire issues. Four-wheel alignment ensures even force distribution across all tires, preventing excessive wear.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.