What engine does the Landwind FengHua use?

1 Answers
Isabel
07/30/25 9:58am
Landwind FengHua is equipped with two engines, one is a 1.5L naturally aspirated engine, and the other is a 1.6L naturally aspirated engine. The specific details are as follows: 1. The 1.5L naturally aspirated engine delivers 95 horsepower and a maximum torque of 137 N·m, with the maximum power achieved at 5500 rpm and the maximum torque available between 3500 to 4500 rpm. The 1.6L naturally aspirated engine produces 96 horsepower and a maximum torque of 142 N·m, with the maximum power achieved at 5500 rpm and the maximum torque available at 3800 rpm. 2. Both the 1.5L and 1.6L naturally aspirated engines feature multi-point fuel injection technology and utilize aluminum alloy cylinder heads and blocks. The engines are paired with a 5-speed manual transmission.
Was this review help?
13
0
Share
More Forum Discussions

What are the tips for practicing straight-line driving in Subject 3?

When driving in a straight line, the most crucial point is to look far ahead, and if you feel any deviation, promptly adjust the steering wheel to quickly straighten the direction; otherwise, the car may veer off in another direction. The key challenges in the Subject 3 test are as follows: 1. Speed and gear mismatch: Be cautious about the errors of high gear at low speed and low gear at high speed during the test. Before shifting gears, always adjust the speed to match the gear, then switch gears. During driving, remember to glance at the speedometer every eight seconds to prevent such mistakes. 2. Straight-line driving deviation: Many students deliberately slow down during driving due to concerns about not maintaining a straight trajectory, which is not advisable. This behavior can actually increase the likelihood of the vehicle deviating from its path, so it's better to maintain a reasonable and consistent speed.
20
0
Share

How many types of car tire pressure monitoring are there?

There are two types of car tire pressure monitoring: direct tire pressure monitoring and indirect tire pressure monitoring. Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure, and then transmit the pressure information from inside the tire to a central receiver module via a wireless transmitter, which then displays the pressure data for each tire. When the tire pressure is too high, it reduces the contact area between the tire and the ground, and the pressure the tire bears increases relatively, affecting the tire's grip. Additionally, when the vehicle passes over bumps or uneven roads, the tire does not have enough space to absorb the shocks, which not only affects driving stability and ride comfort but also increases the impact on the suspension system, leading to potential hazards. Moreover, the risk of tire blowouts increases correspondingly in high temperatures.
7
1
Share

Who is at fault when reversing into a straight-moving vehicle?

The vehicle reversing is fully at fault if it collides with the vehicle behind. Traffic laws stipulate that when reversing, motor vehicles must observe the situation behind, confirm safety, and then proceed. Therefore, in such accidents, the reversing party bears full responsibility. Relevant details are as follows: 1. Precautions for reversing: When reversing, it is essential to observe the surrounding environment, especially being cautious of potential blind spots at the rear. It is advisable to honk in advance and be ready to brake at any time. Safety measures include checking the rear situation before reversing, estimating the reversing path, and ensuring the front of the vehicle does not hit obstacles. Particularly when turning the steering wheel significantly, the turning radius of the front wheels is larger than that of the rear wheels, causing the front of the vehicle to swing outward more prominently. Extra attention must be paid to avoid scraping the front. 2. Reversing techniques: This method is more suitable when parking on the right side or requiring a longer distance for reversing. If the rear of the vehicle needs to move right backward, turn the steering wheel to the right; conversely, turn it to the left, which aligns with the steering operation when driving forward. Do not constantly look behind while reversing. After ensuring rear safety, intermittently check the side mirrors, monitor the distance between obstacles and the vehicle body, and use the steering wheel to adjust the vehicle's position accordingly.
4
0
Share

What Causes White Smoke from Car Exhaust in Winter?

White smoke from car exhaust in winter is caused by water vapor adhering to the inner walls of the muffler in the exhaust pipe. Since the exhaust gas coming out of the pipe is at a high temperature, this high-temperature water vapor rapidly cools when expelled from the exhaust pipe, quickly condensing into visible white smoke or small water droplets. Car exhaust poses significant hazards, with major pollutants including carbon monoxide, nitrogen oxides, hydrocarbons, lead, sulfides, and more. The harmful substances emitted while driving damage both the environment and human health: car exhaust pollution primarily manifests as contributing to the greenhouse effect, depleting the ozone layer, and causing phenomena like acid rain and black rain. The harm to human health mainly includes causing various diseases, severely damaging the respiratory system, and having strong carcinogenic properties.
7
3
Share

Where is the Peugeot 301's cabin air filter located?

The Peugeot 301's cabin air filter is located inside the glove compartment under the front passenger seat. It can be accessed by removing the cover panel. The cabin air filter, commonly known as the pollen filter, functions to purify air entering the vehicle interior from outside, improving air cleanliness. The Peugeot 301 features a sedan design with a body length of 4440mm and a wheelbase of 2650mm, presenting a compact overall design with a short yet powerful rear styling. With its pure, fluid, and elegant design language, the Peugeot 301 embodies French sophistication in design. It comes equipped with EPS plus dual front and side airbags as standard safety features, meeting drivers' needs while delivering a relaxed and enjoyable driving experience.
10
3
Share

What modules make up the car body?

The car body modules consist of the body shell, car bumpers, car spoilers, engine hood, doors, windows, front sheet metal components, interior and exterior body trims and accessories, seats, as well as ventilation, heating, cooling, and air conditioning systems. The body shell serves as the installation base for all body components, typically referring to the rigid spatial structure formed by major load-bearing parts such as longitudinal beams, cross beams, pillars, and their connected sheet metal components. Doors are mounted on the body shell via hinges. Their structure is relatively complex and they are crucial components ensuring the functional performance of the body. These sheet metal components form spaces that accommodate the engine, wheels, and other parts. Car bumpers consist of three parts: an outer panel, cushioning material, and a crossbeam. They are designed to absorb and mitigate external impacts, protecting the front and rear of the body. During collisions, they help safeguard pedestrians and reduce injuries to occupants in high-speed impacts. Car spoilers primarily function to reduce the lift generated when the vehicle is traveling at high speeds, thereby preventing rear wheel lift-off. The engine hood ensures engine cooling and sound insulation, providing ride comfort while the engine operates at high speeds. It also offers dustproof and waterproof protection for the motor, battery, and various wiring in the engine compartment.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.