What engine does the Honda CR-V use?

1 Answers
VonGemma
07/25/25 11:02am
The Honda CR-V is equipped with two engines: a 1.5T and a 2.0L, with engine models L15BL and LFA11 respectively. L15BL engine: The actual displacement of the L15BL engine is 1498ml, with 4 cylinders arranged in an L formation, and turbocharged intake. The compression ratio of the L15BL engine is 10.3, with a DOHC valve train. The engine reaches its maximum power at 5600 rpm and maximum torque at 5000 rpm. LFA11 engine: The actual displacement of the LFA11 engine is 1993ml, with 4 cylinders arranged in an L formation, and naturally aspirated intake. The compression ratio of the LFA11 engine is 13, with a DOHC valve train. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. In terms of body dimensions, the Honda CR-V measures 4550mm in length, 1820mm in width, and 1685mm in height.
Was this review help?
7
3
Share
More Forum Discussions

What Causes the Abnormal Noise When Shifting Gears in a Grand Cherokee?

Grand Cherokee shifting gear abnormal noise reasons are as follows: 1. Normal ABS activation: The ABS working process is actually a cycle of locking-releasing-locking-releasing, keeping the vehicle in a state of near-lock rolling. When you brake hard and trigger the ABS, it will produce a clunking sound, which is normal. In this case, just press the brake pedal firmly to the end. 2. Automatic transmission vehicle makes a "clunk" sound when braking: If you hear a "clunk" sound between the transmission and the gear lever when pressing the brake pedal, the main reason for this sound may be the electronic linkage between the brake system and the automatic transmission. Pressing the brake activates the transmission solenoid valve, which produces a "clunk" sound. At this time, you need to press the gear lever lock button to shift gears, which serves as a safety reminder.
13
1
Share

What are some tips for using the Mazda3 Axela?

During the break-in period of a new car, it is important not to let the engine run at high speeds without load. Avoid driving at a constant speed for extended periods, whether fast or slow. Do not keep the accelerator fully depressed for long durations or run the engine at high RPMs for too long. Automatic trunk opening: Simply press and hold the trunk button on the key fob for about two seconds, and the trunk will open automatically. Key fob not working due to water damage or being dropped: There is a switch on the back of the key fob. Press it to remove the mechanical key. In emergencies, such as when the key fob is out of battery or submerged in water and stops working, you can use the mechanical key to open the door. Then, place the key fob near the ignition switch and press the ignition button to start the car. If the key fob is out of battery, the dashboard will display a red key symbol. You can still start the car by pressing the ignition button for several seconds. Leaving the key fob inside the car: If you unlock the car but do not enter within 30 seconds, the car will automatically relock. It is recommended to keep the key fob on your person and not leave it inside the car after entering. If you forget to take it out and the car locks automatically, the key fob will temporarily become inactive. You will need to use a spare key to start the car. Once the car is started, the previously locked key fob will resume normal function.
8
3
Share

What is the solution for slight coolant leakage after replacing the cylinder head gasket?

Coolant leakage should be addressed by replacing the hose or re-securing the connection depending on the situation. Coolant replacement method: Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue adding water to the reservoir so that it continuously flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out from the reservoir will have a faint pink color. Continue adding clean water until the outflowing water runs clear. Note: Don't forget to remove the heater hose to drain the water from the heater core. After approximately 1 hour of draining, add new coolant through the radiator hose - this allows the coolant to flow into the radiator quickly. Then add another container of coolant to the reservoir until it's nearly full. Run the engine for about 10 minutes; as some air is purged from the cooling system, the fluid level will drop. Add more coolant until it reaches the "MAXT" mark on the reservoir.
17
5
Share

Can the Broken Rear Window Defroster Wire Be Repaired?

If the defroster wire in the car's rear windshield is broken, it cannot be repaired; the entire rear windshield must be replaced. However, if it's just a blown fuse, replacing the fuse will suffice. The rear windshield heating system uses resistance heating wires, which are particularly useful during rainy or snowy weather. Function of the defroster wire: The horizontal lines on the rear windshield are the defroster wires. Their primary function is to defrost and demist the glass. During rainy or snowy conditions, activating the defrost/demist button electrifies the heating wires, raising the glass temperature. This causes frost or fog on the glass to melt into water droplets or evaporate as mist, effectively removing frost and fog. This ensures clear visibility for the driver, enhancing safety during reversing and driving. Usage duration of defroster wire: It's important to note that the rear windshield defroster should not be used for extended periods. Each use should be limited to approximately 15 minutes. While the defroster function effectively removes frost and fog, prolonged or uneven heating due to faulty wires can not only reduce its effectiveness but also pose safety risks, potentially leading to windshield cracking in severe cases.
4
1
Share

Is the lifetime maintenance for Hongqi HS5 real?

Hongqi HS5 lifetime maintenance is indeed a real offer. The lifetime warranty for Hongqi HS5 means that after the product warranty period ends and before the vehicle is scrapped, as long as the warranty conditions are met, the vehicle will receive free repair services (including labor and material costs). The conditions for the lifetime warranty are: the vehicle must be owned by the first owner; the vehicle damage is not caused by an accident; the vehicle must be maintained according to the maintenance schedule and content specified in the , and the maintenance must be performed at an authorized Hongqi dealership. As long as these conditions are met, when the vehicle experiences product quality issues, Hongqi's after-sales service will repair the vehicle free of charge, covering both material and labor costs. It is important to note that all wear-and-tear parts of the vehicle are not covered under the warranty. This includes items such as wiper blades, batteries in the remote key, vehicle bulbs, fuses, spark plugs used in the engine, oil filters, fuel filters, vehicle brake pads, and tires, among others.
3
5
Share

Can I Turn on the Air Conditioning When the Car is Parked?

You can turn on the air conditioning when the car is parked. However, it will not have a cooling function, and prolonged use can easily drain the battery. Therefore, it is not recommended to keep the air conditioning on for long periods when the engine is off. If you need ventilation, switch to the external circulation mode to allow fresh air to enter the cabin. Below are some maintenance tips for car air conditioning: 1. Do not randomly adjust the air vent direction: When using the air conditioning, failing to adjust the airflow direction properly can reduce its effectiveness. Based on the principle that cold air sinks and warm air rises, the correct approach is to point the vents upward when cooling and downward when heating. 2. Regularly start the air conditioning in winter: In regions with milder winters, some car owners may not use the air conditioning at all during the season. Prolonged disuse can cause the rubber seals to age and the lubricants on internal components to dry out. Starting the air conditioning periodically allows the components to be lubricated and maintains their condition, so it's best to run the air conditioning at least once a week in winter. 3. Avoid prolonged continuous use of the air conditioning: Keeping the air conditioning on for too long after starting the car can increase the pressure on the condenser, leading to wear and tear on the cooling system. Therefore, avoid using the air conditioning for extended periods. If the cabin temperature has reached a comfortable level, turn it off and restart it later. 4. Ventilate and cool the car before using internal circulation in summer: During hot summers, many drivers habitually switch to internal circulation as soon as they enter the car, thinking it will cool the cabin faster. However, since the interior temperature is higher than outside, this approach is less effective. Upon entering the car, first open the windows for ventilation and activate external circulation to expel the hot air. Once the cabin temperature drops, switch to internal circulation.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.