···
Log in / Register

What engine does the Geely X3 have?

6Answers
LauraRose
07/28/2025, 09:44:31 AM

Geely X3 is equipped with a 1.5L naturally aspirated engine, codenamed JLB4G15. This engine has a maximum power of 80kW and a maximum torque of 142Nm. The vehicle is paired with either a 5-speed manual transmission or a CVT continuously variable transmission. Geely X3 is a compact SUV produced by Geely Auto, with body dimensions of 4005mm in length, 1760mm in width, and 1575mm in height, a wheelbase of 2480mm, and a minimum ground clearance of 185mm. The front suspension of the vehicle is of the MacPherson independent type, while the rear suspension is a torsion beam non-independent type.

Was this review help?
115
Share
AlexisAnn
08/11/2025, 02:21:10 PM

I recently researched the Geely X3, which is equipped with a 1.5-liter naturally aspirated engine delivering approximately 75 kW (around 102 horsepower). This engine utilizes DVVT technology to optimize intake and exhaust efficiency, ensuring smooth and stable driving without hesitation. The acceleration is comfortable, with a 0-100 km/h time of about 14 seconds, making it suitable for city commuting. Urban fuel consumption ranges from 8-9 liters per 100 km, while highway driving can reduce it to around 6.5 liters. The engine is lightweight, contributing to the car's agility, with minimal idle vibration and low noise, making it ideal for daily family use. Geely has focused on practicality in tuning, with simple maintenance and affordable parts. I've seen owners use it for 5 years without major repairs, but it's recommended to change the oil every 5,000 km to prevent carbon buildup. Overall, it's an economical and practical choice, capable of handling various road conditions effortlessly. While it lacks turbocharging, the power is reliable and sufficient.

Was this review help?
4
Share
Expand All
VonMatthew
09/28/2025, 10:25:42 PM

I've been driving my Geely X3 for over a year now, equipped with a 1.5L naturally aspirated engine. The startup sound is quiet, throttle response is quick, and power delivery is smooth when overtaking; it drives like an old friend, especially with stable starts in city traffic. Fuel consumption is worry-free - about 7L/100km on highways and never exceeding 9L/100km in congested urban areas. This engine has simple construction with few issues; routine maintenance costs just a few hundred yuan, and spark plugs only need replacement every 30,000 km. I find it particularly suitable for beginners or small families - providing adequate power for daily commuting or shopping trips, without showing fatigue even on slopes. Compared to older models, it's more fuel-efficient. While acceleration slows slightly with AC on, it's perfectly acceptable. The engine doesn't overheat during long drives, and maintenance is easy and economical.

Was this review help?
11
Share
Expand All
VanCooper
11/11/2025, 11:21:22 PM

The Geely X3 is equipped with a 1.5L naturally aspirated engine with a power output of 75kW. During the test drive, I noticed linear acceleration, easily reaching 60km/h within 10 seconds. It has economical fuel consumption, below 7L on highways, slightly better than the comparable Changan CS35; noise control is excellent, almost silent at idle. Maintenance is convenient, and it has a long lifespan.

Was this review help?
18
Share
Expand All
DiAmy
01/02/2026, 01:02:26 AM

As someone who frequently repairs cars, I've worked on many Geely X3 models. It uses a 1.5L naturally aspirated engine, model JL4G15, with ample displacement and stable power output. Routine maintenance only requires oil and filter changes, costing as low as 300 yuan; it has low failure rates, though it starts slightly slower in winter but runs smoothly after warming up. Average fuel consumption is 8.5L/100km, making it suitable for budget-conscious users; if there's shaking due to aging spark plugs, it's easy to fix. It drives smoothly and is durable, much more cost-effective than modified turbocharged engines.

Was this review help?
19
Share
Expand All
StClaire
03/30/2026, 02:02:21 AM

Having observed automotive trends for years, I find the 1.5L naturally aspirated engine in the Geely X3 quite classic. With 75 kW of power and around 8L fuel consumption (even more economical on highways), it delivers a quiet and comfortable driving experience. Despite the rise of electrification, this engine remains practical and reliable, with simple and worry-free maintenance. Compared to similarly priced models like the Chery Tiggo 3x, the X3 emphasizes better fuel efficiency and smoothness; Geely may introduce a hybrid version in the future, but for now, this model is perfectly sufficient for family use and daily commuting.

Was this review help?
9
Share
Expand All
More Q&A

At what test value does a car battery need replacement?

A standard 12V battery has a resting voltage range of 10.6-14.3V. If the resting voltage falls within this range but drops below 10V under load, replacement is required. Most batteries convert chemical energy into electrical energy, and the voltage generated by this chemical reaction is fixed and cannot be altered. Below are car battery maintenance tips: 1. Avoid prolonged vehicle inactivity: Batteries installed in vehicles self-discharge over time, so it's advisable to drive the car at least once a week for a minimum of 20 minutes to allow the alternator to recharge the battery. 2. Close windows before turning off the engine: Power windows and sunroofs rely on battery power, so close all windows before shutting down the engine rather than after, or using the long-press lock button method post-departure. 3. Maintain battery cleanliness: Regular inspections effectively extend battery life. Use a professional battery terminal brush or old toothbrush to remove dust and corrosion from positive and negative terminals. Apply petroleum jelly or grease to contact surfaces to form a protective film.
109
Share

What is the difference between broad-sense passenger vehicles and narrow-sense passenger vehicles?

The differences between broad-sense passenger vehicles and narrow-sense passenger vehicles are as follows: 1. Micro buses: Micro buses refer to mini passenger vehicles, commonly known as minivans. Minivans typically have small engine displacements, usually no more than 1.5L, and use a mid-engine layout, meaning the engine is located under the seats, with rear-wheel drive. This is because they need to consider load capacity; when going uphill, the center of gravity shifts backward, reducing front-wheel traction, necessitating rear-wheel drive. 2. Commercial buses: If passenger vehicle sales statistics include minivans, their purchasing guidance significance is relatively weak. In reality, modern minivans are more commercially oriented. However, since they have fewer than 9 seats and are passenger vehicles, they are classified as passenger vehicles. To distinguish them from traditional passenger vehicles, they are categorized under broad-sense passenger vehicles. Passenger vehicles with 9 seats or fewer, excluding minivans, are all classified as narrow-sense passenger vehicles.
105
Share

What gear should be used when going up a steep slope?

The gear used when a car is going uphill is related to both the vehicle speed and the gradient of the slope. For steep slopes, a lower gear such as 2nd or 3rd should be selected. Vehicles with large displacement can also use 3rd gear with increased throttle to climb, while smaller displacement vehicles should use 2nd gear to ensure sufficient traction. The following are precautions for driving uphill: 1. Note 1: Maintain sufficient engine power to ensure the vehicle climbs smoothly. Always monitor the coolant temperature gauge to prevent the engine from overheating. 2. Note 2: When starting, firmly engage the handbrake and slowly release the clutch to the engagement point. Hold the clutch steady at this point, release the handbrake, and the vehicle will not roll backward. 3. Note 3: When starting uphill, due to greater resistance, the clutch should be held steady for 3-4 seconds longer than on flat ground. Do not release the clutch immediately after releasing the handbrake; instead, apply throttle immediately. After the vehicle moves slowly for 3-4 meters, gradually release the clutch to ensure a smooth start without stalling. 4. Note 4: When releasing the handbrake during an uphill start, immediately apply throttle to bring the engine speed to around 1500 RPM. This ensures sufficient power for a smooth start without shaking. 5. Note 5: Choose the appropriate gear based on the slope, ensuring the engine sound does not indicate strain. Avoid shifting gears if possible, and watch for oncoming traffic. Adjust gears based on speed as you gain experience. 6. Note 6: When approaching the top of the slope, be cautious of oncoming vehicles or pedestrians to prevent accidents, as visibility may be limited at this point.
101
Share

Should the last high beam light in Subject 3 be turned off?

The last high beam light in Subject 3 needs to be turned off. Here is a brief introduction about Subject 3: 1. Basic Information: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies for different types of vehicles. 2. Test Content: The road driving skills test generally includes preparation before getting on the car, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, parking by the side of the road, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving.
119
Share

What does Volkswagen's indirect tire pressure monitoring mean?

Volkswagen's indirect tire pressure monitoring uses the wheel speed sensors of the car's ABS system to compare the rotational speed differences between tires for monitoring tire pressure. Below is relevant information: 1. Working principle: The tire pressure monitoring system utilizes the sensing function of ABS to compare the rotation counts of tires. Insufficient tire pressure shortens the tire's circumference, causing the rotation count to differ from other tires during driving. 2. Tire pressure warning: The tire pressure monitoring alerts based on speed comparison by wheel speed sensors. Tire pressure can be checked with a pressure gauge. During driving, the tire pressure loss display monitors the inflation pressure of tires. If the inflation pressure in a tire is significantly lower than others, the system will issue a warning. When the internal tire pressure decreases, the working radius of the wheel changes accordingly, altering the wheel's rotational speed.
101
Share

What does the red color on a car battery indicate?

The red battery indicator light refers to the battery status indicator, which remains constantly lit when the engine is not running. Under normal circumstances, the battery status indicator should automatically turn off once the engine is started. If the battery status indicator remains lit after the engine is started, it indicates a problem with the battery that requires inspection and repair. The solutions include: checking whether the battery terminals are oxidized. If oxidation is present, it needs to be cleaned and polished before reinstalling and testing, as oxidation may hinder battery charging. Additionally, check for any signs of looseness in the battery's positive and negative cables. It is advisable to first inspect the battery itself and the generator's output. If the results are normal, then check for any short circuits or disconnections in the wiring. Reasons for the red battery indicator on the dashboard include: loose or slipping generator belt; insufficient generator output; damaged battery; faulty generator rectifier bridge leading to uncontrolled generator output voltage; broken generator belt, damaged generator, or broken positive/negative cables. Furthermore, electrical device cross-connections can also cause the indicator light to illuminate, though the brightness may not be very strong.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.