What engine does the GAC Trumpchi GM6 use?

2 Answers
DePaul
08/26/25 2:48am
GAC Trumpchi GM6 car engine is jointly developed by SAIC Group and General Motors, and is produced by SAIC's engine factory. The engine model of GAC Trumpchi GM6 is 18K4C, with a maximum power of 124kw, maximum torque of 250Nm, maximum power speed of 5500rpm, and maximum torque speed of 170 Nm. For daily maintenance of the GAC Trumpchi GM6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust system and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and keep the oil volume moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to pass through the bypass valve and bring contaminants back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
Was this review help?
13
1
Share
DiPiper
09/08/25 2:53am
The GAC Trumpchi GM6 is equipped with a 1.5-liter turbocharged engine independently developed by GAC, with a model designation like 4A15J1. It delivers a maximum horsepower of approximately 169 PS and a torque of 270 N·m, featuring direct fuel injection technology for smooth and powerful performance. This engine has optimized fuel injection and turbocharger systems, providing quick acceleration response with no lag during city driving and effortless performance during highway cruising. Compared to older MPV engines, it shows significant improvements in noise control and vibration suppression, ensuring a quiet and comfortable cabin experience, making it ideal for long family trips. Additionally, the engine utilizes an aluminum alloy cylinder block to reduce weight and enhance efficiency, with an average fuel consumption of 7-8L/100km, offering excellent cost-effectiveness. For maintenance, it is recommended to perform inspections every 5,000 kilometers with reasonable oil change intervals. Overall, this engine is one of the core highlights of the GM6, boasting mature and reliable technology that helps owners save on operating costs.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What is the displacement of the Buick Regal?

The Buick Regal is equipped with two engine displacement options: 1.5T and 2.0T. Below are the specific details of the Buick Regal: 1. Engine: The 1.5T engine has a maximum power output of 125 kW and a maximum torque of 252 Nm, while the 2.0T engine delivers a maximum power of 192 kW and a maximum torque of 350 Nm. 2. Transmission: Both engines are paired with a 9-speed automatic manual transmission. The two engines in the Regal utilize direct fuel injection and turbocharging technology. Direct fuel injection provides better atomization, allowing the fuel to disperse into uniform small droplets during the engine's operation.
9
2
Share

What is the National Emission Standard for VI?

VI refers to China VI, where VI stands for the Roman numeral six. Below is relevant information about China VI: 1. Compared to China V fuels, China VI fuels can reduce particulate emissions by up to 10%, significantly decreasing pollutant levels in vehicle exhaust. 2. The China VI emission standard represents a 40%~50% improvement over the current China V standard, surpassing Euro 6 standards and being comparable to U.S. levels. 3. Under the China VI standard, the upper limits for aromatic hydrocarbon content in ethanol gasoline are reduced by 12.5%, olefin content by 25%, and benzene content by 20%.
20
5
Share

How to Determine When Fuel Injectors Need Cleaning?

When fuel injectors become dirty, the car will exhibit the following noticeable symptoms: 1. Increased engine noise, especially noticeable at lower gears and below 2500 RPM. 2. Unresponsive throttle, resulting in less smooth driving. There is a noticeable lag after pressing the accelerator, and the engine RPM rises slowly when revving in neutral. 3. Idle vibration, particularly noticeable when starting. There may be slight misfiring when shifting at low gears and low RPM. Here is some information about cleaning: 1. Cleaning interval: Clean every 40,000 to 60,000 kilometers. 2. Price: Cleaning at a 4S shop costs around 1000 RMB.
5
1
Share

How to use the air conditioning in Nissan Qashqai?

Nissan Qashqai air conditioning usage instructions are as follows: 1. Cooling/Heating: Adjust ventilation and fan speed. For cooling, press the "A/C" button (no need for heating), then set the temperature to desired level. 2. Dehumidification/Defogging: Set ventilation mode to front defroster (FRONT), adjust fan speed, and turn on the "A/C" button. Note: For quick defrosting of the windshield exterior, set both temperature and fan speed to maximum. 3. Air conditioning settings: You can set to external circulation mode, adjust ventilation mode, fan speed and temperature.
20
1
Share

What Causes Car Shaking at High Speeds?

High-speed car shaking can be attributed to the following reasons: 1. Uneven brake disc surfaces with excessive radial runout. During braking, the inconsistent contact between brake pads and discs causes fluctuating braking force, resulting in body vibration—especially noticeable during light braking. 2. Significant deviation in wheel alignment data. This makes the vehicle harder to control during acceleration, accompanied by slight vibrations. 3. Improper tire pressure (either too high or too low). Overinflated tires intensify shaking at higher speeds, while underinflated tires cause the vehicle to pull to one side. 4. Abnormal tire wear. Irregular tire surface wear due to misaligned wheels or rim deformation leads to body vibration during driving.
14
4
Share

How to Use the Auto Start-Stop Function in Volkswagen Passat?

Volkswagen Passat's auto start-stop function is located next to the gear lever on the center console and is operated via a mechanical button. Generally, vehicles equipped with an auto start-stop system have this function enabled by default, requiring no additional action. Here are some tips for using the auto start-stop function: 1. Turning it off: The owner needs to manually turn it off each time they drive. To disable it permanently, a visit to a 4S dealership is required for settings adjustment. 2. For vehicles without hill start assist, it's advisable to turn off this function when starting on a slope to prevent the vehicle from rolling backward. 3. During heavy traffic holidays, it's best to disable this function to avoid slower starts.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.