What engine does the Fiesta use?

1 Answers
McEmilia
07/30/25 3:19am
The Fiesta's engine is produced by Changan Ford and is a domestically manufactured engine. The Fiesta's engine model is GTDIQ3A. The 1.0T version has a maximum power of 92KW and a maximum torque of 170Nm. The 1.5L version has a maximum power of 76KW and a maximum torque of 1385Nm. The 1.3L version has a maximum power of 63KW and a maximum torque of 123Nm. For daily maintenance of the Fiesta's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
19
1
Share
More Forum Discussions

What are the causes of insufficient turbocharging?

Insufficient power in a turbocharged vehicle may be due to air leakage caused by inadequate sealing of the boost pump or leaks in the intake piping. Another possibility is an issue with the turbocharger itself, such as insufficient lubrication or wear of the turbine, leading to suboptimal turbine speed and reduced boost pressure. Timely inspection and repair are recommended. The main functions of turbocharging are: 1. Increasing the engine's air intake: This enhances the engine's power and torque, making the vehicle more powerful. 2. Delivering greater power output: After installing a turbocharger, an engine's maximum power can increase by 40% or more compared to without the turbocharger. This means the same engine can output significantly more power after being turbocharged.
18
0
Share

Where is the OBD interface of the Buick Excelle?

The OBD interface of the Buick Excelle is located behind the coin box on the driver's side. Here is some extended information about the Buick Excelle: 1. Introduction: The new Buick Excelle embodies dynamic aesthetics that not only please the senses but also touch the soul. Inheriting the exterior design philosophy of the Buick family, the new Excelle perfectly showcases the aesthetic taste of Italy's top design masters, seamlessly blending innovative aesthetics with elegant simplicity, naturally exuding a poised demeanor. 2. Exterior: Inside the cabin, the design follows the dual "H" concept, striving to create a harmonious and spacious driving and riding space. Beneath its refreshed appearance, the new Excelle is equipped with a brand-new chassis system, simultaneously enhancing driving pleasure and safety performance, making the charm of technology within easy reach. The luxury and comfort standards of mid-size sedans are thus redefined.
2
5
Share

What does yielding when meeting vehicles mean?

Yielding when meeting vehicles means that when vehicles meet, one must stop to let the other vehicle pass first. Below are the precautions for meeting vehicles: 1. Observe surrounding vehicle conditions: This includes observing the model, speed, and load of the oncoming vehicle, the width and condition of the road ahead, the situation of pedestrians and vehicles on the roadside, as well as parked vehicles and obstacles. 2. Estimate a safe distance: Through observation and comparison, estimate the approximate position and road occupation when the two vehicles meet, leaving an appropriate lateral safety gap. 3. Reduce speed: Slow down when meeting vehicles. If conditions are poor as the meeting approaches, control the speed even more, avoiding blind encounters. If necessary, stop first to ensure a smooth meeting between the two vehicles.
1
0
Share

What is the reason for the left side being too wide when reversing into the parking space?

The left side being too wide when reversing into the parking space is because the steering wheel was turned back too early. Below are the detailed descriptions of the driver's license examination subjects: 1. Subject 1: Examination on road traffic safety laws, regulations, and related knowledge. The structure of the question bank and basic question types are formulated by the Ministry of Public Security, and provincial public security traffic management departments establish the examination question bank for their respective provinces (autonomous regions, municipalities) based on local conditions. 2. Subject 2: Examination on site driving skills, including test items such as reversing into the parking space, stopping and starting on a slope, turning at a right angle, driving along curves, and parallel parking. 3. Subject 3: Examination on road driving skills. 4. Subject 4: Safe and civilized driving knowledge, test items: knowledge related to safe and civilized driving.
2
2
Share

Where to Insert a USB Drive in Audi Q3?

Audi Q3 does not have a USB port. Here is some relevant information about the Audi Q3: 1. Although there is no USB port, you can connect your phone via Bluetooth to play music, or download music to an SD card and insert it into the car's SD card slot to play the music stored on the SD card. 2. If the owner insists on using a USB drive to listen to music, there is a port in the armrest box of the high-end models, and the owner can use the included data cable to connect the USB drive. 3. The Audi Q3 will be tuned for a more dynamic driving performance, with a luxurious and distinctive exterior, and will be equipped with adaptive dampers, similar to those found in the TT.
8
0
Share

What are the functions of different gears?

Introduction to the functions of car gears is as follows: 1. N gear (neutral): Neutral gear, which functions the same as the neutral gear in a manual transmission, used for temporary parking. Another function is that if the engine suddenly stalls while driving and you want to restart the engine while moving, you need to shift into N gear. 2. P gear (parking): Parking gear, used when the engine is turned off for parking or the car is stationary. When the vehicle is stopped, you need to shift into P gear to power off, remove the key, and lock the doors. 3. D gear (drive): Drive gear, used for driving on general road surfaces, also one of the most commonly used gears. It can automatically switch to a comfortable working state based on road conditions and vehicle speed.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.