What engine does the FAW Besturn X40 use?

1 Answers
VanBennett
07/29/25 9:01pm
FAW Besturn X40 is equipped with a 1.6L naturally aspirated engine across all variants, delivering a maximum power of 114 horsepower and a peak torque of 155 N·m. This engine can output its maximum power at 5,500 rpm and reach peak torque at 3,600 rpm. The Besturn X40 is a compact SUV with body dimensions of 4,310mm in length, 1,780mm in width, and 1,680mm in height, featuring a wheelbase of 2,600mm. In terms of exterior design, the Besturn X40 showcases a dynamic and rugged styling with an overall posture full of agility. The vehicle inherits the distinctive hexagonal front grille from the Besturn family, offering strong recognition. Its sleek and streamlined headlights exhibit a strong personality, brimming with inspiration, appearing both intelligent and sporty.
Was this review help?
14
4
Share
More Forum Discussions

What Items Are Included in a Car's First Maintenance Service

Primarily, it involves changing the engine oil and oil filter, followed by some complimentary inspection items as listed below. Tire Pressure Check: If the tire pressure of a newly purchased car hasn't been checked, it's usually not at the standard level. Lighting Check: To identify any non-functioning lights. Undercarriage Inspection: Mainly checking for any impacts, deformations, or oil-leaking components under the chassis. Fluid Level Checks: Inspecting whether fluids are insufficient or leaking. Computer Diagnostic Data Flow: Checking if the working data from various sensors is normal. Below is additional information: Car Maintenance: Refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of a car, also known as vehicle upkeep.
1
2
Share

Does the Radiator Need Cleaning?

The radiator needs cleaning. If left uncleaned for a long time, it can easily develop rust and scale, which significantly reduces the cooling system's heat dissipation efficiency and may cause the radiator to boil over. In severe cases, it can damage the engine. Cleaning steps: 1. Ensure the engine is cooled down and turned off; 2. Remove the radiator cap, making sure the engine is cool; 3. Open the drain plug at the bottom of the radiator to let the coolant flow into a bucket; 4. Close the drain plug and fill the radiator with water; 5. Start the engine, turn on the heater control system, add cooling system cleaner, and let the engine idle for 30 minutes; 6. Turn off the engine, let it cool for 5 minutes, then drain the liquid from the radiator; 7. Close the drain plug, fill the radiator with water, let the engine idle for 5 minutes, and then refill with the appropriate compound.
1
4
Share

Where is the cabin air filter located in the Mitsubishi Outlander?

The cabin air filter in the Mitsubishi Outlander is located behind the glove box on the passenger side. The functions of the cabin air filter include: 1. Providing fresh air; 2. Absorbing harmful substances; 3. Filtering solid particles. Taking the 2021 Mitsubishi Outlander as an example, it belongs to the compact SUV category with the following dimensions: length 4705mm, width 1810mm, height 1710mm, and a wheelbase of 2670mm. The fuel tank capacity is 63 liters. The 2021 Mitsubishi Outlander features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine producing a maximum horsepower of 166PS, maximum power of 122kW, and maximum torque of 201Nm, paired with a 6-speed continuously variable transmission.
12
1
Share

What are the reasons for the surge in failure rate of GAC Trumpchi GM6?

The reasons for the surge in failure rate of GAC Trumpchi GM6 are as follows: Weak power: All models of Trumpchi M6 are equipped with a 1.5T turbocharged engine, paired with a 6-speed manual or 7-speed wet dual-clutch transmission, delivering a maximum horsepower of 169 and a peak torque of 265 Nm. Although the power parameters seem decent, the vehicle actually feels sluggish during acceleration, and the power reserve for high-speed overtaking is slightly insufficient. Gear shifting possible after engine shutdown, posing serious safety hazards: The gear lever locking design of Trumpchi GM6 has obvious defects. The issue manifests as the gear lever easily disengaging from its original position when lightly shaken up and down after parking and turning off the engine. If in doubt, one can test this with an actual vehicle. Such a defect carries severe safety risks. For instance, if a child accidentally moves the gear lever from 'P' to 'N', causing the vehicle to roll, the consequences would be unimaginable.
4
0
Share

What is the top speed of the Yuan Pro?

The top speed of the Yuan Pro is 160km/h. The BYD Yuan Pro adopts a new family-style design similar to the Han EV, featuring a closed grille paired with a silver trim strip that runs across the front face, giving it a very fashionable visual effect. The headlight cluster continues the design of the previous Yuan EV, using full LED light sources and including an automatic headlight function. The dual-tone front bumper has air intake decorations on both sides, presenting an overall look that is refined and sharp. Below is an introduction to the Yuan Pro: Side Profile: The sharp waistline of the Yuan Pro effectively highlights its youthful and dynamic style, with dual-tone mirror housings and a color-blocking design on the C-pillar, both carried over from the Yuan EV. Body Dimensions: The Yuan Pro measures 4375mm in length, 1785mm in width, and 1680mm in height, with a wheelbase of 2535mm.
4
5
Share

Gear Explanation for the Haval Chitu?

Haval Chitu generally uses first gear at speeds below 10 km/h, which is also the starting gear for the vehicle. When the speed is between 10 km/h and 20 km/h, the gear can be shifted to second gear. As the speed increases further to between 20 km/h and 40 km/h, third gear should be engaged. For speeds exceeding 40 km/h up to 60 km/h, fourth gear is appropriate, and fifth gear can be used for higher speeds. Below is an extended explanation: Manual and automatic transmissions differ: When driving a manual transmission, gear shifting requires manual intervention, whereas an automatic transmission can shift gears automatically based on speed. To be precise, each gear in a manual transmission corresponds to a specific speed range, and it is advisable to follow this practice. However, during everyday driving, frequent gear shifting may not be necessary, which is why many drivers simply use a middle gear continuously—this explains why third gear is considered the universal gear.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.