What engine does the Explorer use?

3 Answers
DelAva
07/29/25 3:27pm
The Explorer is equipped with two types of engines: one is a 2.3-liter turbocharged engine, and the other is a 3.5-liter turbocharged engine. Both engines are paired with a 6-speed automatic transmission. The Explorer is an imported SUV from Ford, classified as a mid-to-large-size SUV. It features an all-wheel-drive system, specifically an on-demand AWD system, which is more than sufficient for urban SUVs. The Explorer has a wheelbase of 2,860 mm, offering a spacious interior. Its overall dimensions are 5,064 mm in length, 2,005 mm in width, and 1,798 mm in height.
Was this review help?
1
1
Share
MacGabriela
08/14/25 8:22am
I've been driving the Ford Explorer for almost two years now, and I feel its 2.3T four-cylinder engine is particularly powerful. The acceleration from a standstill is very smooth, and overtaking is completely effortless. My fuel consumption is around 11-12 liters per 100km in the city, and it can drop to about 9 liters on the highway, which is quite worry-free. The engine sound is a bit loud during cold starts, but it becomes very quiet when driving. For regular maintenance, I always go to the 4S dealership, with minor services costing around 800 yuan. Despite the car's large size, the engine tuning is very smart, making it stable even when climbing hills. Last time, when our family went on a road trip fully loaded, we drove continuously for five hours without any power degradation. The reliability is truly impressive.
Was this review help?
11
2
Share
Expand All
Mason
10/11/25 8:36am
The Explorer offers a diverse engine lineup, with the mainstay being the 2.3T four-cylinder EcoBoost, delivering a maximum power of 203 kW, paired with a 10AT transmission for smooth and linear power delivery. The top-tier ST version is equipped with a 3.0T V6 twin-turbo engine, boasting an impressive 400 horsepower. The hybrid variant features a 3.3-liter V6 combined with an electric motor. These engines utilize all-aluminum block and direct injection technology to reduce weight and enhance efficiency. I recall the 2011 model used a 3.5-liter V6 naturally aspirated engine, which was later gradually replaced by turbocharged options. Ford has a knack for engine tuning, ensuring strong low-end torque and responsive driving. The new models also feature optimized emission systems to meet China's National VI standards.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

What are the methods for parallel parking entry and exit?

First, you must understand parallel parking. After parking, there is a reference point at the rear of the car corresponding to the horizontal line of the parking space for operation. Exiting is simple: turn the steering wheel fully to the left, and when the left side of the car's front aligns with the roadside line ahead, straighten the wheel and proceed straight.
3
5
Share

Where is the air intake located on the Magotan?

It is located at the grille area. You can identify the intake system by spotting a thick tube connected to the engine (intake pipe) along with an air filter box, which then connects to the grille. The air intake utilizes forward motion to collect and channel air into the engine or ventilation system. Primary functions of automotive air intake: Air delivery: Supplies clean, dry, sufficient, and stable air to the engine to meet its operational requirements, preventing contaminants and large particulate matter from entering the combustion chamber, which could cause abnormal engine wear. Noise reduction: Another critical role of the intake system is to minimize noise and regulate airflow. Excessive noise not only affects the vehicle externally but also impacts cabin noise levels, significantly influencing ride comfort. The design quality of the intake system directly affects engine power output and acoustic performance, which correlates with overall vehicle comfort. Properly designed muffler components can reduce subsystem noise and enhance the vehicle's NVH (Noise, Vibration, and Harshness) performance.
4
5
Share

What does it mean when 6 warning lights are on in a Magotan?

There are many possible reasons for the engine warning light to come on in a Magotan. It could be due to wiring issues, sensor malfunctions, control module failures, poor fuel quality, unclean engine cylinders, or carbon deposits. It is recommended to visit a 4S shop or repair facility as soon as possible to inspect the relevant modules and components. Below is some relevant information: Notes: If other warning lights remain on, it is necessary to have the corresponding modules and components checked at a 4S shop or repair facility. If only the engine warning light is on, try restarting the vehicle and observe whether the light remains on. If the engine warning light turns off, there is no issue. However, if it stays on, the engine-related components and modules should be inspected at a 4S shop or repair facility. Magotan: The Volkswagen Magotan is closely related to the Passat B6, known as the Future B6, and is the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, "Mai" symbolizes confidence, decisiveness, and dynamism, while "Teng" represents soaring, surpassing, and passion.
10
2
Share

What are the reasons for the engine light to come on in a Mazda6?

The reasons for the engine light to come on in a Mazda6 are: 1. Damaged ignition coil or large spark plug gap; 2. Short circuit in the engine wiring; 3. Leakage in the ignition system; 4. Faulty oxygen sensor or failed catalytic converter; 5. Poor performance of the fuel pressure regulator or dirty fuel filter. The solutions for the engine light to come on in a Mazda6 are: 1. Open WDS for fault diagnosis; 2. Check the solenoid valve and wiring harness; 3. Repair the wiring harness and replace the PCM. Taking the 2015 Mazda6 as an example, its body dimensions are: length 4670mm, width 1780mm, height 1435mm, wheelbase 2675mm, and fuel tank capacity 64L. The 2015 Mazda6 is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 147PS, maximum power of 108kW, and maximum torque of 183Nm.
7
0
Share

What brand is the audio system in the Magotan 330 Luxury model?

The audio system in the Magotan 330 Luxury model is from the Dynaudio brand. Car audio systems are installed to alleviate the monotony of driving and traveling for both the driver and passengers. For music-loving car owners, listening to music while driving can be particularly enjoyable, but it's important to keep the volume at a reasonable level to avoid compromising driving safety. Here is some relevant information: Audio Brand: Initially, car audio systems started with AM radios, later evolving to AM/FM radios, cassette players, and then to CD players compatible with DCC and DAT digital audio. Today, car audio systems have reached high standards in sound quality, operation, and vibration resistance, capable of withstanding the bumps of rough roads while ensuring stable performance and perfect sound quality. Components of Car Audio Systems: Head Unit: The source of car audio. Head units include RADIO-only units, RADIO plus MP3 units, CD units, MP3 plus CD changers, CD plus navigation units, and CD/DVD/car MP5 units, DVD players, etc. Speakers: The sound-producing units of car audio systems, converting electrical energy into sound waves. These include tweeters, mid-range speakers, woofers, and subwoofers.
12
1
Share

How to Match the Tire Pressure Sensor for Buick LaCrosse?

Buick LaCrosse tire pressure sensor replacement and matching method is as follows: 1. With the vehicle ignition on, turn the left stalk on the steering wheel to select and enter the tire pressure display column. 2. Press the SET/CRL button on the left stalk (for about 2 to 3 seconds). 3. The onboard computer prompts for tire pressure monitoring relearning, select Yes (enter tire pressure monitoring relearning mode), (otherwise no learning). 4. The horn beeps twice, indicating that tire pressure monitoring relearning is in progress. (The onboard computer also displays: Tire pressure learning). 5. The vehicle's left turn auxiliary light stays on, and the left mirror turn signal stays on, indicating that the left front tire pressure relearning is in progress. At this time, increase (inflate) or decrease (deflate) the left front tire pressure for about 5 seconds (or +8KPa value). This completes the relearning process for the left front tire pressure monitoring, and the horn beeps to prompt entry into the tire pressure learning mode. 6. The horn beeps twice, and the turn signal stays on for about 3 seconds, indicating that the four-tire pressure monitoring relearning is complete.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.