···
Log in / Register

What engine does the Emgrand use?

3 Answers
LylaRose
07/29/25 3:51pm
The Emgrand engine is a naturally aspirated engine, independently developed by Geely Automobile, so it is a domestic engine. The engine model used in the Emgrand is JLY-4g15, with a maximum power of 80kW, a maximum horsepower of 109, and a maximum torque of 140N·m. Daily maintenance for the Emgrand's engine can be performed using the following methods: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, change the oil regularly based on usage conditions and keep the oil level moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine works properly but also extends the overall lifespan of the radiator and engine.
Was this review help?
5
1
Share
MasonDella
08/15/25 3:40am
The Emgrand typically comes equipped with engines developed by Geely itself, such as the 1.5L naturally aspirated JLγ-4G15 model, which delivers a maximum horsepower of 109 hp and features dual VVT technology to improve fuel efficiency. The daily driving experience feels sufficiently powerful. I test drove it, and it starts smoothly with quick response, making overtaking on highways effortless. Fuel consumption is well controlled, with 7-8L/100km in urban driving, and long-term maintenance is straightforward. The new version also offers a 1.4T turbocharged engine, which provides stronger power suitable for long-distance driving. It is recommended that owners regularly check the engine oil and air filter to prevent carbon buildup issues and extend the engine's lifespan. Overall reliability is high, with even a ten-year-old engine running smoothly.
Was this review help?
7
3
Share
Expand All
LillianLee
10/12/25 4:17am
My Emgrand is equipped with a 1.4T engine. After driving it for over four years, I can say its acceleration is impressive—just step on the gas, and it zooms ahead when overtaking. The daily fuel consumption is around 7L, dropping to 6L on long trips, saving me a lot of money. The engine runs quietly with no noise, and even with the AC on in summer, it doesn’t struggle. I’ve only replaced the brake pads and never had major issues. Maintenance costs are low, with regular servicing costing just a few hundred yuan. I’d recommend new owners use the gentle start mode to protect the engine. In congested city traffic, the power delivery is smooth, and the start-stop function works well without guzzling fuel. Overall, the driving experience is excellent.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

Must You Avoid Rolling Down Windows for Three Days After Tinting?

After applying car window tint, it is advisable to avoid rolling the windows up and down for several days, as the newly installed tint film requires 5-7 days to firmly adhere to the window. During this period, the film, which hasn't fully bonded, is prone to shifting. Additionally, the following precautions should be noted: 1. Avoid washing the car: It's important to refrain from washing the car within the first three days after tinting to prevent the film from peeling off due to moisture. 2. Defroster lines: Try not to use the rear window defroster for about a week. After tinting, you may notice a foggy appearance caused by water vapor—this is a normal part of the drying process. Excess moisture can also negatively affect the defroster lines. During this time, you can gently clean the tinted surface with a damp towel, sponge, or soft cloth. Moreover, the foggy appearance will gradually fade over time.
16
5
Share

What is the difference between a mechanical torque-sensing limited-slip differential and a Torsen differential?

Here are the differences between a mechanical torque-sensing limited-slip differential and a Torsen differential: 1. Nature: The Torsen differential functions as a differential when the differential torque inside is small, but automatically locks when the differential torque becomes too large, effectively improving the vehicle's off-road capability. Off-road vehicles with only electronic limited-slip are suitable for icy roads and light off-roading but not for extreme off-road conditions. 2. Principle: The Torsen differential operates based on the high internal friction torque (Mr) of the worm gear transmission pair for torque distribution. The internal friction torque (Mr) depends on the relative speed of the output shafts at both ends. When the speed difference between the two output shafts is small, the friction of the worm driven by the rear worm gear is also minimal. The differential spur gear absorbs the speed difference between the two output shafts. The mechanical limited-slip differential prevents tire slippage through mechanical principles, distributing driving force evenly to all four tires. Such off-road vehicles can handle high-intensity and prolonged off-road conditions, making them the most rugged off-road vehicles available.
19
5
Share

What brand is hfbos tire?

hfbos tire is a brand of Kumho Tire from South Korea. The history of Kumho Tire dates back to 1960. Currently, it has become one of the world's largest tire manufacturing enterprises. Kumho Tire has a complete production line, covering various categories such as passenger car tires, commercial vehicle tires, and high-tech tires. The following are the subsidiaries of Kumho Tire: 1. Kumho (China) Tire Sales Co., Ltd.: In May 2006, Kumho established a sales company in Shanghai, China, fully responsible for the sales of products from Kumho's four factories in China, implementing the separation of production and sales. 2. Kumho Tire Tianjin Factory: Adhering to the principle of 'Green Enterprise,' Kumho Tire Tianjin Factory strictly implements dust pollution prevention measures to ensure that all pollution emissions meet national environmental standards.
13
4
Share

Where is the fog light located on a car?

Car fog lights are located below the headlights, at the lowest part of the bumper closest to the ground. Fog lights are divided into front fog lights and rear fog lights. The fog light activation button is on the light control stalk. Locate the fog light symbol position and rotate the control ring to turn on the fog lights. The fog light switch has three positions: position 0 is off, the first position controls the front fog lights, and the second position controls the rear fog lights. When one position is engaged, the front fog lights work; when two positions are engaged, both front and rear fog lights operate together. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility such as fog or heavy rain, so fog light beams need to have strong penetration capability.
5
5
Share

What is the Impact of Unsprung Mass on Vehicle Performance?

Unsprung mass affects vehicle acceleration and handling. Below is an introduction to the relevant content: 1. Performance Enhancement: If a car is compared to a sprinter, then the unsprung mass is like running shoes—the lighter the shoes, the faster the sprinter runs. By replacing heavy components with lightweight aluminum alloy wheels and suspension parts (such as control arms and rocker arms), the unsprung mass can be effectively reduced, thereby improving the vehicle's acceleration and handling performance. 2. Other Effects of Unsprung Mass: When a vehicle is driven on the road, the suspension system continuously absorbs impacts from the road surface. The ideal comfort state for passengers is when the vehicle body remains relatively stationary to the road surface while the wheels move up and down with the road conditions. Achieving this purely through mechanical structures is nearly impossible, but by increasing the ratio of sprung mass to unsprung mass, the vehicle can come closer to this ideal driving state.
2
3
Share

What is the purpose of road width transition markings?

The purpose of setting road width transition markings is to alert drivers that there will be intersections, crosswalks, or other crossing facilities ahead, requiring them to slow down or stop to yield. Specific functions of road width transition markings: When vehicles pass through sections with longitudinal deceleration markings, drivers will visually perceive the lane gradually narrowing. This serves as a reminder for drivers to increase their attention, take deceleration measures in advance, and drive slowly. It helps prevent situations where drivers abruptly brake when approaching the stop line, avoiding potential accidents. These markings effectively prevent sudden braking by motor vehicle drivers before reaching the stop line. Pedestrians on crosswalks can clearly sense vehicles yielding, thereby feeling safer, reflecting a harmonious traffic environment between pedestrians and vehicles. Appearance of road width transition markings: Longitudinal deceleration markings consist of a series of diamond-shaped dashed lines parallel to the lane boundary lines. At the starting position of these markings, a 30-meter transition section is set, where the diamond-shaped dashed lines gradually widen from 10 cm to 30 cm. These markings are one of the new additions to the national standard for road traffic markings (GB5768.2-2009).
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.