What engine does the Dorcen G70s use?

3 Answers
StJasper
07/29/25 12:52pm
Dorcen G70s uses a Shenyang Mitsubishi engine with the model code 4G63S4T. Taking the 2019 Dorcen G70s as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4736mm in length, 1942mm in width, and 1672mm in height. It has a wheelbase of 2850mm, a minimum ground clearance of 196mm, a fuel tank capacity of 60 liters, and a curb weight of 1731kg. The 2019 Dorcen G70s features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine that delivers a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 250Nm, paired with an 8-speed automatic transmission.
Was this review help?
15
4
Share
LeCora
08/14/25 1:34am
I'm quite familiar with engine research. The Dorcen G70S typically uses a Shenyang Aerospace Mitsubishi 2.0T turbocharged engine, with a model like 4G63S4T, delivering around 190 horsepower, which is sufficient for daily family use and light off-roading. This engine is designed for stability, with early turbo engagement, providing decent acceleration response in urban driving conditions and no difficulty on highways. In terms of fuel consumption, it averages 8-9 liters per 100 kilometers, not particularly fuel-efficient, but 92-octane gasoline is adequate. Technically, it features a dual VVT system, optimizing fuel efficiency, and overall durability is good. Regular maintenance is recommended, using high-quality engine oil to prevent carbon buildup, which can avoid idle vibration issues. Engine noise control is average, and upgrading sound insulation would enhance comfort.
Was this review help?
3
0
Share
Expand All
AmeliaFitz
10/09/25 6:25am
I've been driving the Dorcen G70S for a while now. It's equipped with a 2.0T engine that delivers reliable and practical performance. It handles daily commutes in the city with ease, accelerates quickly for highway overtaking, and provides direct steering feedback. On long trips, my average fuel consumption is just over 7 liters per 100 km, rising slightly to around 9 liters in urban driving—typical for a midsize SUV. The engine runs quietly, warms up quickly, and offers a comfortable, noise-free ride. I've encountered minor issues a few times, like slight hesitation during cold starts, but a visit to the repair shop revealed it was due to aging spark plugs, which were replaced to fix the problem. Paying attention to fuel quality and avoiding low-grade gasoline can help extend the engine's lifespan. For an average family, it's a worry-free choice.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

Where is the fuel pump relay located in the 2011 Nissan Qashqai?

The fuel pump relay of the Nissan Qashqai is located in the engine compartment, beneath the intake pipe, next to the battery. A relay is an electronic control device that consists of a control system and a controlled system, commonly used in automatic control circuits. It essentially functions as an automatic switch that uses a smaller current to control a larger current, thereby playing roles such as automatic regulation, safety protection, and circuit switching in electrical circuits. Below are related details: 1. Principle: Electromagnetic relays generally consist of an iron core, coil, armature, and contact reeds. When a certain voltage is applied across the coil, a current flows through it, generating an electromagnetic effect. The armature is then attracted by the electromagnetic force, overcoming the tension of the return spring to move toward the iron core, thereby causing the moving contact of the armature to connect with the stationary contact (normally open contact). When the coil is de-energized, the electromagnetic attraction disappears, and the armature returns to its original position under the spring's reaction force, causing the moving contact to reconnect with the original stationary contact (normally closed contact). This process of connection and disconnection achieves circuit conduction and interruption. 2. Distinguishing 'Normally Open' and 'Normally Closed' Contacts: The stationary contact that remains disconnected when the relay coil is not energized is called the 'normally open contact'; the stationary contact that remains connected is called the 'normally closed contact'.
1
1
Share

What does the Elysian EV mode mean?

Elysian EV refers to the electric mode. When this mode is activated, the vehicle is driven by the generator, which is suitable for use in traffic congestion. Below are the specific details about the Elysian: 1. Powertrain: The Elysian is an MPV under Dongfeng Honda, equipped with a 2.0L L4 naturally aspirated engine, delivering a maximum horsepower of 146 HP and a maximum torque of 175 Nm, paired with a CVT transmission. 2. Body dimensions: The Elysian measures 4950mm in length, 1842mm in width, and 1711mm in height, with a wheelbase of 2900mm. It has a top speed of 160 km/h and a fuel tank capacity of 50L.
13
4
Share

Analysis of the Audi Q5 Chassis?

Audi Q5 chassis introduction is as follows: 1. Overview: It adopts a suspension combination of front five-link and rear trapezoidal link. The front suspension is a traditional double-wishbone suspension, with the upper and lower control arms simplified into two pull rods, allowing for more flexible suspension arrangement. The rear suspension consists of an H-shaped control arm, an upper control arm, and another upper control arm. 2. Subframe: The subframe features a frame shape reinforced with two diagonally arranged steel plates, enhancing the overall structure. The subframe is made of steel. 3. Front Suspension: The Audi Q5's front suspension is a five-link type, with the lower control arm and lower rear control arm made of aluminum. The steering tie rod and lower rear control arm have significant bends to prevent interference with the wheels when steering is at full lock, increasing the turning angle. The pivot axis of the lower rear control arm is diagonally arranged to withstand some longitudinal forces from the body. 4. Rear Subframe: The Q5's rear subframe is also frame-shaped, compared to the front subframe, it lacks the cross-reinforcing steel plates but appears larger and more robust. The rear subframe is also made of steel. 5. Rear Suspension: The Audi Q5's rear suspension is in a trapezoidal multi-link form. The H-shaped control arm, seemingly large and bulky, is actually a hollow structure, made of the same aluminum material as the wheel bearing housing. The connection point between the rear suspension spring and the hydraulic shock absorber differs, with an increased spring diameter sufficient to support the Q5's body. The hydraulic shock absorber connects through the H-shaped control arm to the wheel bearing housing.
17
5
Share

What causes intermittent idling vibration in Audi Q5?

Audi Q5 intermittent idling vibration may be caused by the following reasons: 1. Dirty air filter: The air filter is designed to protect the engine and reduce wear, usually replaced around 10,000 kilometers. If not replaced in time, insufficient air intake can cause low idle speed, leading to engine vibration. Solution: Replace the air filter. 2. Clogged fuel injectors: Fuel injectors are key components for fuel injection in cars, with a long service life of up to hundreds of thousands of kilometers. However, gum in gasoline can clog the injector nozzles, causing inconsistent fuel injection among injectors and uneven cylinder operation, resulting in engine vibration. Solution: Remove and clean them. 3. Ignition system issues: Check the condition of spark plugs, high-voltage wires, and ignition coils. Poor ignition system performance or weak spark plug firing can also cause such faults. Solution: Check if spark plugs are excessively carbon-fouled and replace them if necessary. 4. Unstable fuel pressure: If you have already cleaned engine carbon deposits, cleaned the throttle body, replaced gaskets and spark plugs, but still notice body vibration at idle, Solution: Check the fuel supply pressure and intake pressure sensors for normal operation. Abnormal fuel pump pressure or incorrect intake pressure sensor readings can all cause body vibration.
17
2
Share

How Many Cylinders Does the Arrizo 5 Engine Have?

The domestically produced Arrizo 5 is equipped with a four-cylinder engine, featuring an inline-four design with a displacement of 1.5 liters. The car's power performance ranks above average among models in the same price range and class, and the engine also incorporates fuel-saving technology. Here is some additional information: 1. Function of a 4-cylinder engine: A 4-cylinder engine provides power for the car. During the engine operation, it allows gasoline to burn and expand within a sealed cylinder, generating thermal energy that pushes the piston to perform work, thereby converting thermal energy into mechanical energy. 2. Composition of a 4-cylinder engine: The components of a 4-cylinder engine mainly include the cylinder block, crankcase, cylinder head, and cylinder gasket. A 4-cylinder engine can refer to both the power generation device and the entire machine including the power unit. The main part of the engine is the cylinder, which is the source of the car's power. Cylinders can be categorized into general-type cylinders and deep-skirt-type cylinders, among others.
19
0
Share

What Causes Intermittent Idle Vibration in the Mazda Atenza?

If a car experiences body vibration during idle, it is highly likely due to suboptimal performance of certain automotive components, such as unstable oil pressure, aging engine parts, excessively dirty engine throttle, or excessive carbon buildup in the fuel injectors. Below are detailed explanations: 1. Unstable Oil Pressure: If you have already cleaned the engine carbon deposits, cleaned the throttle, replaced the oil pads and spark plugs, but still notice body vibration during idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump supply pressure or incorrect values and poor performance of the intake pressure sensor can both cause body vibration. The best solution is to check the oil pressure and replace the components if necessary. 2. Aging Engine Components: Components like engine mounts aging can cause body vibration. Engine mounts are essentially the shock absorption system of the engine, responsible for absorbing minor vibrations during engine operation. If the engine mounts are faulty, these vibrations will be transmitted to the steering wheel and the cabin. 3. Excessive Carbon Buildup in the Engine Throttle or Fuel Injectors Causing Vibration: When there is excessive carbon buildup, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean mixture during cold starts and making it difficult to start. After starting, the gasoline adsorbed on the carbon deposits will be sucked into the cylinders by the engine's vacuum suction force for combustion, enriching the mixture. This causes the engine's combustible mixture to alternate between lean and rich, leading to idle vibration. The solution is to clean the fuel system and check if the idle control valve has carbon buildup, which should be cleaned thoroughly.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.