What engine does the Changan Oushang X5 use?

2 Answers
DelHayden
07/24/25 6:00am
JL473ZQ2 is the engine model used in the Changan Oushang X5, with a maximum horsepower of 180 hp, a maximum power of 132 KW, a maximum power speed of 5500 rpm, and a peak torque of 300 N.m. The Changan Oushang X5 is domestically produced, and the engine is independently manufactured by Changan Company, with the factory located in Chongqing. For the daily maintenance of the Changan Oushang X5's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid faults, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When engine oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it will either burst the filter element or open the safety valve, allowing the oil to pass through the bypass valve and still bring contaminants back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it remains suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.
Was this review help?
7
1
Share
MacGraham
08/11/25 1:42am
The Changan Oshan X5 is primarily equipped with the Blue Whale NE series 1.5-liter turbocharged engine, which as a car enthusiast I love discussing in detail. This model, codenamed NE15TG, features direct fuel injection and dual VVT technology, delivering a maximum output of around 180 horsepower and torque close to 300 Nm. On the road, it offers quick power response, making starts and overtaking incredibly smooth. Paired with a 7-speed wet dual-clutch transmission, the acceleration process is both stable and efficient. In terms of fuel economy, real-world testing shows a combined fuel consumption of 7.5 liters per 100 kilometers, with good fuel-saving performance on long trips. During maintenance, it's recommended to check the spark plugs and fuel system, as the engine is generally stable and reliable. Compared to other SUVs like the Haval H6, it has slightly higher power but falls a bit short in noise control, though the daily driving experience is very comfortable.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

What are the consequences of overdue vehicle inspection?

If a vehicle fails to undergo annual inspection on time, accidents will not be covered by insurance, and if it goes without inspection for three cycles, it will be forcibly scrapped. The following are detailed explanations about overdue vehicle inspections: 1. No insurance coverage: Insurance companies will refuse claims for uninspected vehicles, as clearly stated in the insurance contract terms. If a traffic accident occurs when the insured vehicle has not undergone the required annual inspection or fails the inspection, or if the vehicle does not have a valid driving license under other circumstances, the insurer will not bear the liability for compensation. 2. Forced scrapping: According to Article 4 of the 'Mandatory Scrapping Standards for Motor Vehicles', if a vehicle fails to obtain the inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection validity period, it will be forcibly scrapped.
13
1
Share

What is the actual fuel consumption of the Ford Equator?

Ford Equator is equipped with a 2.0T engine, with a combined fuel consumption of around 8.3 liters per 100 kilometers. The manufacturer recommends using gasoline with an octane rating of 92# or above. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance leads to increased fan speed and lower temperature settings to achieve a cooling effect. 2. Frequent hard braking: Repeated hard braking is a primary reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement vehicles: For vehicles exposed to direct sunlight, avoid turning on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
1
3
Share

Can You Use Windshield Wipers in Snow?

It is advisable to avoid using windshield wipers during snowy conditions. Instead, lift the wiper blades to prevent them from freezing to the windshield. Placing a layer of newspaper or a specialized snow cover on the front windshield is recommended for easier snow removal. Here are some tips for using wipers in snowy weather: 1. Do not immediately use the wipers or attempt to manually force them. When the car is covered in snow and the windshield has significant accumulation, avoid using the wipers right away to remove snow, as this can tear the rubber surface of the wiper blades, rendering them ineffective or even damaging them. 2. The correct approach is to start the car, turn on the heater to blow warm air onto the front windshield, and then use a brush or dry towel to remove the snow. If there is ice, you can use an ice scraper or plastic scraper to clear the residue.
16
3
Share

What is the Function of the Steering Linkage?

The function of the steering linkage is to transmit the force and motion output from the steering gear to the steering knuckles on both sides of the steering axle, causing the steering wheels to pivot. It ensures that the turning angles of the two wheels change in a specific relationship, minimizing relative sliding between the wheels and the ground during vehicle steering. The steering linkage primarily consists of the pitman arm, drag link, steering knuckle arm, left and right tie rod arms, and the tie rod. The drag link is made of a steel tube with enlarged ends. The ball joints at both ends comprise a ball stud, ball socket, spring seat, spring, and plug, connecting to the pitman arm and steering knuckle arm, respectively. The tie rod connects the left and right tie rod arms and consists of the tie rod body and threaded ends. Each end contains a ball stud, ball socket, and spring, among other components. The ends are threaded into the tie rod body with opposite threads—one right-handed and the other left-handed. By loosening the clamp bolt and rotating the tie rod body, the overall length of the tie rod can be adjusted to set the toe-in.
20
0
Share

Does Canceling a Subject 3 Appointment Affect the Next Reservation?

Canceling a Subject 3 appointment does not affect the next reservation. Generally, canceled driving test appointments are not counted. Successfully canceling a scheduled appointment does not impact future reservations. Canceling an appointment is equivalent to not taking the test and will not be counted toward the five-attempt limit. Each subject allows only three cancellations. If the cancellation is not due to failing the test, you can immediately reschedule. If you have only successfully submitted a reservation request, you can cancel it directly online. If the appointment has been successfully scheduled and you have received an SMS notification, the student must bring their ID card to the vehicle management office to complete the cancellation procedure. Note that this must be done before the day before the exam. Late cancellations or failure to complete the cancellation process will be treated as absenteeism. The vehicle management office uses an online exam reservation system to process exam reservation procedures for applicants who have completed registration according to regulations. The specific process and details are as follows: Based on the exam schedule, the system accepts exam reservation applications from applicants and stops accepting them five days before the exam. If the exam schedule is not fully booked, the acceptance period can be extended until three days before the exam. The system automatically sorts reservation applicants based on the following rules: For first-time Subject 3 exam reservations, sorting is based on the driver's license application acceptance time. For non-first-time Subject 3 reservations or reservations for other subjects, sorting is based on the date of the last exam taken. For applicants who successfully reserved an exam but canceled or missed it due to personal reasons, sorting is based on the cancellation or absenteeism time. If both rules 2 and 3 apply, sorting is based on the most recent time. Based on the exam schedule and applicant sorting, the system determines the exam reservation results, notifies applicants via SMS, and publishes the results online for applicants to check and download/print reservation vouchers. For exam reservation cancellation requests submitted on or before the deadline, the cancellation is processed directly (only once). For requests submitted after the deadline, the applicant must visit the city vehicle management office's service hall to cancel the exam in person.
14
3
Share

What Causes the Battery Light on the Car Dashboard to Illuminate?

Here are the reasons that cause the battery light on the car dashboard to illuminate: 1. Battery failure, such as depleted power or a dead battery. Solution: Use a multimeter to test the battery voltage. If the voltage is low, recharge it; if the battery is dead, replace it. 2. Loose or oxidized battery terminals, leading to poor contact, which can also trigger the battery light. Solution: Clean and tighten the battery connections. 3. A loose alternator belt or tensioner causing the charging system to malfunction and the battery light to illuminate. Solution: Replace the belt or adjust the tensioner. 4. Faulty alternator voltage regulator or excitation circuit malfunction leading to abnormal operation and the battery light turning on. Solution: Troubleshoot the alternator.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.