What engine does the CDX use?

1 Answers
DeAndrew
07/24/25 9:22pm
The CDX is equipped with a 1.5T turbocharged engine and a 2.0L hybrid powertrain with an electric motor. In terms of power, the 1.5T engine delivers a maximum power output of 134 kW, while the 2.0L engine produces a maximum power of 158 kW. The CDX is a compact SUV under the GAC Acura brand, with body dimensions of 4496 mm in length, 1840 mm in width, and 1615 mm in height, and a wheelbase of 2660 mm. In terms of exterior design, the Acura CDX features the brand's signature diamond-shaped pentagon front grille, with sleek lines and a sporty, dynamic appearance. The taillight design echoes the headlights, and the dual exhaust pipes add a bold touch.
Was this review help?
1
3
Share
More Forum Discussions

What causes abnormal noise and failure to start when igniting a Jeep Compass?

The following are the reasons why a Jeep Compass may produce abnormal noise and fail to start when igniting: Dead battery: A depleted battery due to reasons like leaving headlights on for an extended period or reaching the end of the battery's lifespan (generally recommended to replace every 2 years). Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures. Checking for a dead battery is simple—just press the horn to find out. Incorrect gear position: For automatic transmission vehicles, the gear must be in P (Park) or N (Neutral) to start. If it's in R (Reverse) or D (Drive), the vehicle won't start. Some manual transmission vehicles may also fail to start if the clutch isn't pressed. If during repairs, water and mud are found in the fuel tank, using such contaminated fuel will only damage the vehicle. Always refuel at reputable gas stations; when traveling, you can use a gauze wrapped around the fuel nozzle to filter impurities. Avoid adding water or low-quality antifreeze to the vehicle, as extremely cold winter conditions can freeze the entire cooling system, crack the engine, render the water pump inoperable, prevent ignition, and damage other engine components.
2
2
Share

What is the reason for the knocking noise during cold start of Passat?

Passat's knocking noise during cold start is caused by the lack of lubrication in the starter's internal gears, leading to sticking and affecting the timely return of the gears. Low engine speed: When the flywheel engine starts, the starter rotates to drive the flywheel and start the engine. At this time, the engine speed is driven by the starter, so the engine speed is lower than the starter speed. When the engine speed after starting is higher than the starter speed, manually operate the ignition switch to turn off the power and shut down the starter. Starter lubrication failure: Due to the internal dirt of the starter and the failure of the lubricating oil, the flywheel engine drives the starter to operate at its own speed. Because of the speed difference between the two, the starter will produce the heard "dirty" sound. When the starter and engine are in a hot state, this noise will stop, but there will be severe noise every time it starts. To remove this noise, the starter can only be cleaned and maintained or replaced, but the cleaning and maintenance effect will not be very good, and the noise will soon return.
3
1
Share

How many gears does the Audi A4 transmission have?

Audi A4L is equipped with a 7-speed dual-clutch transmission. Mechanical transmission: The dual-clutch transmission in the Audi A4L is a type of mechanical automatic transmission. This type of transmission differs significantly from traditional automatic transmissions. The dual-clutch transmission does not use a torque converter from the outset, as it is not produced based on an automatic transmission. Automatic transmission: Since this type of transmission does not use the transmission gears of an automatic transmission, it also eliminates the gear-shifting process of an automatic transmission. The gear-shifting jerk is significantly reduced, but the transmission's jerkiness is still quite noticeable when the car is driving at low speeds.
12
4
Share

What is the engine displacement of the BMW 520?

The maximum power is 177 horsepower, with a peak torque of 230 N·m. Powertrain Technology: The 520 fully incorporates BMW EfficientDynamics technology, including brake energy regeneration, electric power steering with speed adaptation, intelligent air flap control, and low rolling resistance tires, among others. The BMW 520 is a sedan model in the BMW 5 Series, produced by BMW, with its most notable feature being the inline 6-cylinder engine paired with an 8-speed automatic transmission, delivering a maximum power of 177 horsepower. Exterior Changes: Like other BMW 5 Series models, the 520 also underwent a transformation from the sharp styling of the previous generation to a more elegant appearance. The overall design leans towards the styling of the new 7 Series and 3 Series. The domestically produced new 5 Series has a wheelbase extended by 140mm compared to the standard version, reaching 3108mm, making the rear seat space exceptionally spacious.
6
3
Share

What is the issue with the Jaguar XF exhaust valve malfunction?

If the Exhaust Gas Recirculation (EGR) valve does not close tightly, some exhaust gas will enter the engine intake pipe through the EGR valve when the engine is idling. Reduction in air-fuel mixture: Since the amount of air-fuel mixture is minimal during engine idling, the exhaust gas entering the intake pipe dilutes the concentration of the mixture, significantly affecting the engine's idle operation. This can cause the engine to idle very unstably or even stall. Exhaust Gas Recirculation: Symptoms of EGR valve malfunction. In many engines, the EGR system routes exhaust gas from one cylinder's exhaust manifold to the EGR valve. For example, in a 4-cylinder inline engine, the EGR pipe is typically connected to the exhaust manifold of the first or fourth cylinder.
7
5
Share

What Causes the Rear Wheel Noise When Turning in Honda CR-V 4WD Version?

The noise when turning is caused by the steering resistance pump reaching its limit. Check the tire bolts: When car tires come into contact with the ground, they produce various levels of noise due to the type of road, uneven surfaces, vehicle speed, tire type, and the tire's own air pressure. Therefore, no matter how perfect a car is, it cannot completely eliminate the noise generated between the tires and the ground during driving. It is necessary to check whether the tire bolts are tightened to eliminate the noise symptoms. Gear shifting and overspeeding: When turning, determine the appropriate speed and steering timing based on the width of the road, the degree of the curve, and traffic conditions. The steering wheel rotation should match the vehicle speed. If the speed is fast, the steering wheel should also be turned quickly. Avoid sudden braking or gear shifting while driving through curves. Take the opportunity to glance at the rearview mirror to be aware of any following vehicles.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.