···
Log in / Register

What engine does the Breeze use?

3 Answers
_travis
07/29/25 4:03pm
The Breeze's engine is domestically produced, utilizing Honda's technology. It is a turbocharged engine and belongs to the Earth Dreams series. The Breeze is equipped with the L15BT engine model. The 1.5T engine delivers a maximum power of 142 kW and a maximum torque of 243 Nm. The 2.0L engine produces a maximum power of 146 horsepower, and the additional electric motor provides a maximum power of 184 horsepower. For daily maintenance of the Breeze's engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD to SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB to CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear, forming sludge. In small amounts, the sludge remains suspended in the oil, but in large quantities, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates smoothly but also extends the overall lifespan of both the radiator and the engine.
Was this review help?
2
1
Share
MacSavannah
08/15/25 4:15am
The Honda Breeze primarily offers two engine options, with the more well-known ones being the 1.5-liter turbocharged engine and the 2.0-liter hybrid system. The 1.5T variant features Honda's L15B engine, delivering approximately 193 horsepower and utilizing i-VTEC technology, which intelligently adjusts the intake valves for quick response and powerful acceleration, making highway overtaking effortless. The hybrid version combines a 2.0-liter gasoline engine with an electric motor, and its e:HEV design enables silent driving in pure electric mode, reducing fuel consumption to below 5 liters, making it highly fuel-efficient. I find these technologies quite innovative, with the turbo minimizing lag and the hybrid battery being stable and reliable. In daily driving, the engine pairs smoothly with the CVT transmission. Compared to other SUVs, the Breeze's engine options are flexible, catering to different needs.
Was this review help?
8
0
Share
Expand All
VanCora
10/12/25 5:29am
Having driven the Honda Breeze for many years, I find its engine performance highly reliable. The 1.5T engine delivers ample power, making starts and uphill climbs effortless, with linear acceleration and no jerking in city driving. The hybrid version is even more worry-free, starting silently with sufficient electric-only range and reduced fuel consumption in traffic. Engine noise is well-controlled, and the transition to engine power at high speeds is smooth, with no noticeable vibrations. I find this design thoughtful, offering both strong power and comfort. Long-term fuel efficiency remains stable, with the 1.5T averaging around 8L/100km in the city and the hybrid 4-5L/100km, proving dependable on long trips. Maintenance is straightforward, requiring only regular oil changes, and I've encountered no major issues. Overall, the Honda Breeze's engine is highly practical, and I recommend it to those who value hassle-free driving.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

Is Wheel Alignment Necessary After Changing Tires?

Wheel alignment is not necessary after changing tires; only wheel balancing is required. Situations that do require wheel alignment include: 1. When the vehicle's steering wheel feels heavy, shakes, pulls to one side, is off-center, or doesn't return to position while driving; 2. Uneven tire pressure and tread wear; 3. Wheel vibration or wobbling; 4. The vehicle pulling to one side. The benefits of wheel alignment are: 1. Enhanced driving comfort; 2. Extended tire lifespan; 3. Improved straight-line stability; 4. Reduced wear on chassis suspension components; 5. Increased driving safety. The principle behind wheel alignment is to adjust the vehicle's four-wheel parameters to ensure optimal driving performance and reliability.
3
5
Share

What are the handling methods for a tire blowout on the highway?

Highway tire blowout handling methods are: 1. Maintain control of the steering wheel and gradually reduce speed; 2. Gradually move the vehicle to the right and stop; 3. Quickly place a warning triangle 100 meters behind the vehicle; 4. Replace with the spare tire and promptly exit the highway. Causes of tire blowouts include: 1. Tire leakage; 2. Excessive tire pressure; 3. Insufficient tire pressure; 4. Severe tire wear. Tire maintenance methods include: 1. Regularly remove debris from tire treads; 2. Periodically check tire pressure; 3. Inspect tire wear and replace when necessary; 4. Promptly repair punctures; 5. Immediately stop and check tire condition if abnormal tire conditions occur while driving.
14
0
Share

What causes abnormal engine noise after an oil change?

The reasons for abnormal engine noise after an oil change are: 1. Overfilling of engine oil; 2. Using oil with inappropriate viscosity. The procedure for changing engine oil is: 1. Start the engine to warm up and bring the transmission to operating temperature; 2. Remove the drain bolt to collect the old oil from the transmission; 3. After draining the old oil completely, remove the oil pan to replace the transmission filter; 4. Reinstall the oil pan and tighten the drain plug; 5. Add new transmission oil; 6. Start the vehicle and shift through all gears; 7. Check the automatic transmission fluid level and adjust if necessary. Precautions for oil change include: 1. Perform the change when the engine is warm to ensure complete drainage of old oil; 2. Add the correct amount of new oil; 3. After adding oil, start the engine to check for leaks, then run the engine for 3 minutes to confirm the oil level reaches the normal mark.
3
5
Share

What is the car depreciation rate?

Car depreciation rates are typically 11% for the first 3 years, 10% from the 4th year onward, and 9% for the subsequent 3 years. Below are the specific details about car depreciation rates: 1. Regulations: The depreciation rate is 11% for the first 3 years, 10% from the 4th year onward, and 9% for the subsequent 3 years. For the first 3 years, the annual depreciation rate is 11%, resulting in a total depreciation of 33% over 3 years. From the 4th year onward, the annual depreciation rate is 10%, leading to a total depreciation of 40%. For the subsequent 3 years, the annual depreciation rate is 9%, resulting in a total depreciation of 27%. According to tax regulations, the depreciation period for passenger cars is 5 years, with a residual value rate of 5%. 2. Impact: The higher the depreciation rate, the worse the vehicle's condition and the lower its residual value.
17
5
Share

What is Section Speed Measurement?

Section speed measurement refers to a method of detecting the average speed of motor vehicles passing through a road section (speed measurement section) between two adjacent speed monitoring points. Functions of the section speed measurement system: By setting up two cameras at two adjacent monitoring points on the same road section, a monitoring and snapshot system is established. This system conducts real-time monitoring and snapshots of vehicles passing through the checkpoint area twice to obtain information such as vehicle speed, traffic flow, license plate number, color, approximate physical dimensions, and driver characteristics. The collected information is then transmitted through a network to the database of the public security traffic command center and traffic control sub-center for data storage, query, comparison, and other processing. Advantages of section speed measurement: High measurement accuracy, stable and reliable speed detection, more comprehensive recorded data. Due to detector limitations, single-point checkpoint devices cannot guarantee 100% image capture of passing vehicles. It offers high measurement efficiency and diverse speed measurement capabilities.
4
1
Share

What is the real reputation of the Haval M6 Plus?

Haval M6 Plus is a car with strong overall performance and balanced capabilities, without any obvious shortcomings. Here is a detailed introduction to the Haval M6 Plus: 1. Largest in-class space: If comparable models are like one-bedroom apartments, then the Haval M6 is a two-bedroom apartment. This analogy is not an exaggeration. Due to adopting the chassis of the first-generation H6, the M6 has a body length of 4664 mm, which is generally more than 12 cm longer than comparable models. 2. Luxurious configurations: Equipped with a wet dual-clutch transmission and double-wishbone independent suspension. It also features practical configurations such as tire pressure display, 360-degree panoramic imaging, auto hold, hill start assist, hill descent control, keyless entry, steering wheel-mounted paddle shifters, and OTA upgrades.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.