What engine does the BMW X5 use?

1 Answers
DeLeonardo
07/29/25 11:28am
BMW X5 is equipped with 2.0T and 3.0T turbocharged engines. The relevant introduction is as follows: 1. BMW X5 is a mid-size SUV launched by BMW. In terms of power, this car has launched two power models, equipped with 2.0T turbocharged engine and 3.0T turbocharged engine respectively. Among them, the maximum power of the 2.0T turbocharged engine is 195kw, and the maximum torque is 400 Nm. The maximum power of the 3.0T turbocharged engine is 250kw, and the maximum torque is 450 Nm. 2. In terms of transmission, both models are matched with an 8-speed automatic manual transmission. The two turbocharged engines equipped in the BMW X5 also adopt the double Vanos variable valve timing system for intake and exhaust valves. This engine adopts a high-pressure injection device, which can precisely control fuel injection according to the working conditions of the engine.
Was this review help?
10
0
Share
More Forum Discussions

How to Use the One-Touch Power Window Function?

To use the one-touch power window function: 1. Pull the window button up directly to raise the window to the top, then release after 3 to 5 seconds; 2. Press the window button down to lower the window to the bottom, then release after 3 to 5 seconds; 3. Press the one-touch button to activate the function. Cars equipped with one-touch power windows have two buttons for window control. The first button position operates like a regular power window, while the second position allows the window to automatically open or close completely with a single press and release. The one-touch power window function is designed for the convenience of drivers and passengers, preventing distractions from manually operating the windows and enhancing safety. It also features an anti-pinch function. Note that only the driver's side typically has the one-touch function.
10
4
Share

What does 'used cars only sold locally' mean?

'Used cars only sold locally' means that consumers who purchase vehicles from this dealer must register and license the car within the same city. This is to prevent malicious competition among 4S stores in different regions, as the state strictly regulates sales area restrictions. When buying a used car, inspect the body: Check if the car body has been damaged in a collision. Stand at one corner of the front and look toward the rear, observing the seams of the body. If they are not straight, have uneven gaps, curved lines, or if the decorative strips are falling off or appear mismatched, it may indicate that the car has been in an accident or undergone repairs. When buying a used car, inspect the interior: Worn pedal mats, dirty seats, and scuffed door handles all suggest that the car has been driven for a considerable distance. If the seller provides seat covers, be sure to check the original seat cushions.
13
0
Share

What are the symptoms of a faulty Focus intake solenoid valve?

Common symptoms of a faulty intake solenoid valve include: 1. Abnormal engine operation or insufficient power; 2. Uneven engine performance and rhythmic shaking at high, medium, and low speeds, with black smoke and backfiring from the muffler; 3. Increased fuel consumption; 4. In severe cases, the engine may fail to start. Effects on power when the intake solenoid valve is faulty: 1. Inability to accurately detect the intake air volume; 2. Difficulty starting the vehicle normally, causing engine idle vibration. Main causes of a faulty intake solenoid valve: 1. Solenoid valve malfunction itself; 2. Loose connections; 3. Open circuits in the wiring. Solutions for solenoid valve damage are as follows: 1. If the solenoid valve itself is faulty, replace it directly; 2. If there is a loose connection, simply tighten it; 3. If caused by an open circuit, repair the wiring.
19
3
Share

Can the Manual Transmission Clutch Get Water Inside?

Manual transmission clutches can indeed get water inside, especially when driving through water. If not careful, water can enter the clutch. Phenomena caused by water in the clutch: The clutch plates may stick together, making gear shifting difficult or impossible while driving, accompanied by gear collision sounds in the transmission. After driving through deep water, if you notice noises when accelerating or even inability to engage gears, it's likely due to water in the clutch. Precautions after water enters the clutch: There is a small hole on the clutch gear where water can automatically drain out, allowing quick dehydration. Since the clutch operates at high temperatures, moisture can also evaporate easily. Typically, any water in the clutch will evaporate within a day.
8
4
Share

What to Do When the Trunk Button of a Buick Excelle Fails to Open the Trunk?

Reasons why the trunk button of a Buick Excelle fails to open the trunk: First, consider whether the car key battery is dead. However, if you can remotely unlock or lock the car doors, it proves that the battery is not the issue. Then, you need to check whether the remote key button is damaged or if there is a problem with the trunk's wiring. Below are some precautions regarding the use of the trunk: 1. Store extremely heavy items with caution. 2. Do not place flammable or explosive items in the trunk. If the temperature inside the car becomes too high, it can easily cause items to spontaneously combust or explode, endangering the vehicle and personal safety. 3. Be cautious when placing valuables and take measures to protect your property. 4. Perishable food items are also not recommended for storage in the trunk.
20
3
Share

Does the Transmission Filter Need to Be Replaced?

Transmission filters need to be replaced. Generally, they are replaced along with the transmission fluid, approximately every two years or after driving 40,000-60,000 kilometers. Relevant information is as follows: 1. The transmission filter, also known as the transmission filter screen, is installed inside the transmission and serves a filtering function. It filters out oil contaminants and impurities in the transmission, thereby protecting the transmission. 2. Over time, friction between metal components in the transmission generates fine debris, and the transmission fluid also accumulates contaminants. These impurities are easily intercepted and filtered by the transmission filter screen, preventing transmission failures. However, as time passes, more and more impurities accumulate, gradually clogging the transmission filter screen, reducing its filtering efficiency. These impurities then adhere to other components in the transmission, accelerating wear and significantly shortening the transmission's lifespan. Remember to check the condition of the filter screen and replace it when necessary.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.