What engine does the Bestune T77 use?

Why does the reversing radar keep beeping?

Reasons why the reversing radar keeps beeping: 1. The reversing radar sensor is dirty; 2. Water ingress in the probe; 3. Malfunction of the reversing radar sensor or controller. The reversing radar, also known as the reverse collision avoidance radar or parking assist device, mainly consists of ultrasonic sensors, a controller, and a display unit. The reversing radar is a safety auxiliary device for parking or reversing a car. It can inform the driver of the surrounding obstacles through sound or more intuitive display, relieving the driver from the trouble of looking around when parking, reversing, and starting the vehicle, and helping the driver eliminate blind spots and blurred vision.

4

3

Share

Will Steering Hard Without Ignition Damage the Car?

No, but it may cause slight wear and tear. The steering will feel heavier because the power steering pump is not activated. Another scenario that may cause damage is turning the steering wheel while the vehicle is stationary. Below are some precautions regarding steering wheel operation: 1. While driving, avoid prolonged one-handed operation unless necessary, and do not rest your hand on the gear shift or window frame for extended periods. 2. Do not turn the steering wheel too forcefully or make sudden turns; avoid turning the steering wheel when the vehicle is stationary. 3. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and potential accidents.

17

2

Share

Does the Qoros 3s have a reversing camera?

The high-end version of the Qoros 3s is equipped with a reversing camera. Here are the specific details about the Qoros 3s: 1. Exterior: The Qoros 3s features the family-style front grille design, with sharp-looking headlights that incorporate LED light sources. The rear of the car has a full-bodied design, with taillights that showcase the typical Qoros design style, and the dual-exhaust layout adds a sporty feel to the vehicle. 2. Interior: The seats are made with a combination of leather and fabric materials. In terms of features, it includes a multimedia display screen, multifunction steering wheel, one-button start, and rear air vents.

10

0

Share

What are the dimensions of the Qoros 5 trunk space?

The trunk dimensions of the Qoros 5 are depth 900-1750mm, width 975mm, and height 785mm. Below are the specific details about the Qoros 5: 1. Exterior: The Qoros 5 features the family-style design on the front face, with sharp-looking headlights that incorporate LED light sources. At the rear, the car has a full-bodied design, with tail lights that showcase the typical Qoros design style, and the dual exhaust layout adds a sporty feel to the vehicle. 2. Powertrain: The Qoros 5 is equipped with a 1.6T turbocharged engine, paired with a 6-speed dual-clutch transmission.

13

5

Share

How to prevent rolling back when starting on a slope with an electronic handbrake?

If you need to park on a slope, after pulling the handbrake, you can place stones under the wheels to prevent the car from rolling back when the handbrake is not tight enough. During daily driving, you can prevent rolling back by coordinating the throttle and clutch. If the clutch coordination is not tight, you can pull the handbrake to prevent rolling back. If the engine stalls due to high gear and low speed on a slope, you should shift gears promptly. Generally, maintaining a high RPM on a slope makes it less likely to stall, and the RPM for shifting gears on a slope should be higher than on flat roads.

17

3

Share

What tests are included in vehicle testing?

Vehicle testing includes CW testing and live network testing. Here are the relevant introductions: 1. CW testing: This involves setting up a transmitting antenna in a typical area to emit a single-carrier signal, then conducting vehicle testing along a pre-set route, using a vehicle-mounted receiver to receive and record the signal field strength at various locations. CW testing offers convenient frequency and environment selection, and as it is an omnidirectional single-carrier test, it is relatively easier to avoid test errors caused by other radio wave interference and differences in antenna gain, ensuring good accuracy of the collected data. 2. Live network testing: This involves collecting and recording pilot signal power data from various base stations in an already operational CDMA network using a vehicle-mounted test phone. Since the path loss data is obtained from an actual network, the test data truly reflects the propagation of broadband signals in the local wireless environment.

10

0

Share

What engine does the Bestune T77 use?

Why does the reversing radar keep beeping?

Will Steering Hard Without Ignition Damage the Car?

Does the Qoros 3s have a reversing camera?

What are the dimensions of the Qoros 5 trunk space?

How to prevent rolling back when starting on a slope with an electronic handbrake?

What tests are included in vehicle testing?

What is the world's number one car brand?

What are the components of a parking sensor?

How to Change Lanes Before an Intersection When Driving?

What is the reason for no sound when the Qoros 5 connects to Bluetooth?