What engine does the Beidou Star x5 use?

2 Answers
Gutierrez
07/24/25 1:27am
Suzuki Beidou Star x5 is equipped with a 1.4L naturally aspirated engine across all models. The 1.4L naturally aspirated engine of the Suzuki Beidou Star x5 delivers 97 horsepower and a maximum torque of 120 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 3600 rpm. Here are some details about the model: 1. The Suzuki Beidou Star x5 measures 3400 mm in length, 1575 mm in width, and 1670 mm in height, with a wheelbase of 2335 mm. Despite its compact size, the interior space of the Suzuki Beidou Star x5 is sufficient for daily needs. 2. The Suzuki Beidou Star x5 has a fuel consumption of approximately 7.0L per 100 km, demonstrating good fuel efficiency. It features a MacPherson independent front suspension and a non-independent single trailing arm rear suspension.
Was this review help?
19
1
Share
DelJudah
08/10/25 9:06pm
I'm a car enthusiast. The Beidou Xing X5 uses the Suzuki K14B engine, which is a 1.4-liter inline-four gasoline engine. It delivers around 97 horsepower and approximately 120 Nm of torque, with a very reliable design. I remember this engine has been consistently used in the Beidou Xing series, and Suzuki's technology ensures a low failure rate. It is equipped with a VVT (Variable Valve Timing) system, which improves fuel efficiency, with the official fuel consumption data around 5.5 liters per 100 kilometers. In city driving, it starts smoothly and responds quickly, but acceleration at high speeds is a bit slower. Maintenance is also simple—regular oil changes and air filter replacements can keep it in good condition. Overall, the K14B engine is classic and durable, suitable for small car purposes, and worth considering if you're looking at used cars.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

When is it appropriate to use high beams?

High beams should be used under the following circumstances: 1. On roads without street lighting or with poor illumination, you may use high beams, but switch to low beams when encountering other vehicles or pedestrians to avoid dazzling them. 2. When unfamiliar with the road conditions and needing to read road signs or other indicators, you may use high beams but should quickly revert to low beams. 3. When overtaking, a vehicle should activate the left turn signal in advance and alternate between high and low beams or sound the horn to alert the vehicle ahead to yield. 4. On highways or in suburban areas without street lighting, high beams can be used to improve visibility, but switch to low beams when meeting oncoming traffic for safety and courtesy.
18
5
Share

Where is the tire pressure monitoring sensor installed?

Tire pressure monitoring sensors can be installed in different locations, which can be divided into built-in and external types. The built-in sensor is installed inside the tire, which is relatively more stable. The external type involves adding a sensor outside the valve stem. Below is an introduction to tire pressure monitoring: 1. The tire pressure monitoring device is a simpler tire pressure monitoring system that utilizes the existing sensing function of ABS to compare the rotation counts of the tires. A tire with insufficient pressure will have a shorter circumference, so if one of the four tires has insufficient pressure, its rotation count will differ from the others while driving. 2. The built-in sensor is installed inside the tire, which is relatively more stable, and the temperature data monitored will be more accurate. 3. The external type involves adding a sensor outside the valve stem, which is easy to install and can be done in minutes. However, there is a temperature monitoring difference of 2-3 degrees compared to the built-in type.
5
2
Share

What is the Toyota Alphard V6?

alphard Toyota V6 is a mid-to-large-sized MPV under the Toyota brand, known in Chinese as the Toyota "Alphard" based on phonetic translation. More details are as follows: 1. This vehicle is a high-end luxury MPV model under Toyota, introduced in 2002, and is currently sold in many countries and regions. 2. As a luxury MPV, the biggest highlight of this car is its comfort.
17
0
Share

How to Deal with Engine Shaking?

Here are the methods to deal with engine shaking: 1. Check if the idle speed motor has carbon deposits. 2. Check if the spark plugs have excessive carbon deposits and replace them if necessary. 3. Check the oil pressure, clean the oil circuit, and replace components if needed. 4. Check the working condition of the high-voltage wires and ignition coils. Below is some related information about engines: 1. The car engine is the device that provides power to the vehicle, determining its power, fuel efficiency, stability, and environmental performance. 2. Car engines are categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid motors. Among them, gasoline engines and diesel engines are both reciprocating piston internal combustion engines, converting the chemical energy of fuel into the mechanical energy of piston movement to output power.
2
0
Share

Is the Sylphy a model of Dongfeng Nissan?

The Sylphy is a compact sedan under Dongfeng Nissan. More information about the Sylphy is as follows: 1. The dimensions of this car are 4641*1815*1450 mm, with a wheelbase of 2712 mm. 2. The Sylphy is equipped with a 1.6-liter naturally aspirated engine codenamed HR16. This engine delivers 139 horsepower and a maximum torque of 169 Nm, with the maximum torque achieved at 4000 rpm and the maximum power at 6300 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The engine is paired with either a 5-speed manual transmission or a CVT transmission. 3. The front suspension of the Sylphy uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The use of a torsion beam at the rear helps to maximize rear passenger space and trunk capacity.
1
4
Share

Can Run-Flat Tires Be Repaired?

Whether a run-flat tire can be repaired depends on the extent of the damage. If it's a routine puncture on the tread, it can be repaired. The tread of a run-flat tire is no different from that of a regular tire, and the common repair method is using a mushroom plug. Below are scenarios where run-flat tires cannot be repaired: 1. The puncture is too large, exceeding 4.2 millimeters. If the puncture is on the sidewall, it cannot be repaired. 2. The tire was punctured and leaked air, causing damage while driving. If it has been repaired twice, it cannot be repaired again. 3. The mushroom plug repair method involves a mushroom-shaped rubber patch. The stem of the mushroom is placed on the outside of the leaking tire, the exposed part is trimmed, and the inside is bonded with a special adhesive. The stem of the mushroom serves as an external reinforcement.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.