What engine does the Audi Q5L use?

1 Answers
VonSpencer
07/25/25 11:52am
Audi Q5L uses the third-generation EA888 2.0T engine. An engine is a machine that converts other forms of energy into mechanical energy. It can refer to both the power generation device and the entire machine including the power unit. Types of engines include internal combustion engines, external combustion engines, gas turbines, and electric motors. The Audi Q5L has dimensions of 4753mm in length, 1893mm in width, and 1659mm in height, with a wheelbase of 2908mm. It is equipped with a 7-speed dual-clutch transmission, reaching a top speed of 210 km/h, and features a 5-door, 5-seat SUV body type.
Was this review help?
3
3
Share
More Forum Discussions

What is the difference between automatic and manual car air conditioning?

The difference between automatic and manual car air conditioning lies in their functionality: Automatic car air conditioning can be set to a specific temperature value via the intelligent computer system according to the owner's needs. The system then automatically controls the output power of the air conditioning compressor and the airflow volume to adjust the temperature to the set value. Manual air conditioning, on the other hand, only allows for the adjustment of cold or warm air and cannot precisely control the temperature. Car air conditioning is designed to regulate and control the temperature, humidity, air cleanliness, and airflow within the car cabin to an optimal state. It provides a comfortable environment for passengers, reduces travel fatigue, creates favorable working conditions for the driver, and ensures safe driving.
7
0
Share

How to Check if a Car Has Gas?

The method to check if a car has gas is: look at the fuel gauge on the dashboard. If the illuminated bars reach the 'F' position, it means the tank is full; the closer the illuminated bars are to the 'E' position, the less fuel remains, indicating the need for a timely refill. The fuel gauge is used to indicate the amount of fuel in the car's fuel tank. The function of its low fuel level warning device is to immediately illuminate an alarm when the fuel in the tank falls below a certain specified level, alerting the driver. Reasons for an inaccurate fuel gauge include: 1. Poor contact or severe wear of the fuel level sensor's sliding resistor; 2. Abnormalities in the instrument circuit or loose and aged electrical components; 3. Deformation of the fuel tank or abnormal bracket; 4. Loose connections or open circuits inside the engine module; 5. Loose grounding wires of the fuel level sensor or fuel pump wiring harness in the car.
9
2
Share

Where is the navigation SD card for the Cadillac XT5?

The navigation SD card for the Cadillac XT5 is located on the lower side of the in-car navigation system, marked with 'GPS'. The Cadillac XT5 is a mid-size 5-door, 5-seat SUV with body dimensions of 4813mm in length, 1903mm in width, 1682mm in height, and a wheelbase of 2857mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 174kW and a maximum torque of 350Nm. The drive system is front-wheel drive, with a MacPherson independent suspension at the front and a five-link independent suspension at the rear.
14
1
Share

What Do the Icons on the Car Dashboard Mean?

Car dashboard icons refer to: 1. Daily indicators: Common ones include high/low beam light indicators, seat belt reminder, turn signal indicators, and parking brake indicators; 2. Warning indicators: Common ones include fuel level indicators, engine oil indicators, and coolant level indicators; 3. Fault indicators: Common ones include bulb failure indicators, cruise control indicators, gear shift indicators, and brake pad wear indicators. Methods for maintaining the car dashboard include: 1. Dampen a cloth with clean tap water and wipe the car dashboard; 2. Apply an anti-scratch protective film on the dashboard screen; 3. Spray a cleaning agent on the dashboard and wipe it off with a soft cloth.
19
2
Share

Where to Place the ETC on the Car Window?

The installation position of the ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with anti-explosion film or those that have been retrofitted with anti-explosion film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, the agent must also bring their valid ID card. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card under the personal name of someone aged between 18 and 60 is required for deducting highway tolls. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which can reduce the driver's field of vision. If this is not considered during ETC installation, it can increase the driver's blind spots. Installing it behind the rearview mirror on the right side can help avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic toll payment for the wrong vehicle. The ETC lane recognition speed is 20 kilometers per hour; driving too fast may prevent the system from reading the vehicle's device information, leading to a failed toll deduction. Additionally, insufficient balance on a debit card linked to ETC can also cause toll deduction failures.
12
3
Share

How to Open the Front Hood of a Lavida XR?

To open the front hood of a Lavida XR: 1. Locate the handle on the left side of the driver's seat; 2. Pull the handle down, and the front hood will automatically open slightly; 3. Reach into the gap to find the spring latch and release it. Taking the 2017 Lavida XR Comfort Edition as an example, it is a compact car with dimensions of 4445mm in length, 1765mm in width, and 1485mm in height, with a wheelbase of 2610mm. The 2017 Lavida XR Comfort Edition is equipped with a 1.2T turbocharged engine, delivering a maximum power of 81kW at 5000rpm.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.