What engine does Soueast Motors use?

1 Answers
DelAmir
07/29/25 11:23am
Soueast Motors' engines are produced by Shenyang Aerospace Mitsubishi Motors Co., Ltd., and are classified as domestically manufactured engines. The engine model used by Soueast Motors is the 4A91T, a 1.5T version with a maximum power output of 115KW, maximum horsepower of 156PS, and maximum torque of 215Nm. The maximum power speed is 5600rpm. For daily maintenance of Soueast Motors' engines, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various engine problems. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
Was this review help?
16
4
Share
More Forum Discussions

What is the tire model of the Mazda6 Atenza?

The Mazda6 Atenza 2.0L model uses tires with the specification 225/55R17, while the 2.5L model uses 225/45R19 tires. Here is some extended information about tires: 1. Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground. 2. They are typically installed on metal rims, supporting the vehicle body, cushioning external impacts, and ensuring contact with the road surface to maintain driving performance. Below is some extended information about the Mazda6 Atenza: 1. The Mazda6 Atenza is a mid-sized 4-door, 5-seater sedan with dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm. 2. In terms of power, the Mazda6 Atenza is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 116 kW and a maximum torque of 202 Nm. 3. Exterior-wise, it features Mazda's latest KODO design language, with a U-shaped front grille and LED headlights.
9
1
Share

What are the dimensions of the ninth-generation Accord?

The specific body dimensions of the Honda Accord ninth generation are as follows: 1. The Honda Accord ninth generation has a body length of 4930 mm, a width of 1845 mm, a height of 1470 mm, and a wheelbase of 2775 mm. 2. The fuel tank capacity of the Honda Accord ninth generation is 65 liters, the trunk capacity is 512 liters, and the curb weight is 1495 kg. Here is some additional information about the ninth-generation Accord: 1. The Honda Accord ninth generation is equipped with a 2.0L inline 4-cylinder naturally aspirated engine. 2. The engine has a maximum power of 114 kW at 6500 rpm, a maximum torque of 190 Nm at 4300 rpm. 3. The front suspension uses a MacPherson strut independent suspension, and the rear suspension uses a multi-link independent suspension.
8
2
Share

What are the dimensions of the BMW M8?

The specific dimensions of the BMW M8 are as follows: 1. The BMW M8 is divided into the Competition version and the standard version. 2. The body dimensions of the BMW M8 Competition are 5098mm, 1943mm, and 1423mm. 3. The body dimensions of the standard BMW M8 are 4873mm, 1912mm, and 1381mm. Below are the differences between the standard BMW M8 and the Competition version: 1. Different wheelbase: The BMW M8 Competition has a wheelbase of 3027mm, while the standard BMW M8 has a wheelbase of 2827mm. 2. Different maximum engine power: The BMW M8 Competition has a maximum engine power of 460kw, while the standard BMW M8 has a maximum engine power of 441kw. 3. The powertrain is the same; the BMW M8 Coupe M Sport version is equipped with a 3.0T inline six-cylinder turbocharged engine, with a maximum power of 340Ps and a maximum torque of 500Nm.
15
3
Share

What does the yellow triangle exclamation mark on the Kia K4 dashboard mean?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation marks: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. Transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which lights up when the tire pressure is too low. Check the vehicle's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the problem.
6
2
Share

Does the Geely GS have ESP?

Geely GS is equipped with an ESP system. The ESP dynamic stability system is standard across all models. The installation of ESP requires steering sensors, wheel sensors, skid sensors, lateral acceleration sensors, and others. Below are some relevant details: 1. ESP refers to the Electronic Stability Program, a patented technology by Bosch. The ESP system is essentially a traction control system, but unlike conventional traction control systems, ESP controls not only the drive wheels but also the driven wheels. 2. The function of ESP is to automatically intervene and correct the driver's actions when the vehicle is operated beyond its limits. 3. With ESP intervention, the system automatically controls throttle reduction and braking. This results in more controlled driving, making it difficult to perform skids, fishtails, or even drift maneuvers.
11
4
Share

How to Clear the Maintenance Information on the Volkswagen New Sagitar?

Here is the method to eliminate the maintenance reminder on the Volkswagen New Sagitar: 1. Turn off the ignition switch to ensure the vehicle is off. 2. Press and hold the "0.0" button on the dashboard. 3. While turning on the ignition switch, keep holding the "0.0" button without releasing it. 4. Pay attention to the information display on the dashboard; when text appears, release the "0.0" button. 5. Press the "0.0" button once again. 6. At this point, the maintenance light should be reset. If it hasn't reset, start the process from the beginning. Here is some related information: 1. When the maintenance light comes on, it indicates that the vehicle's scheduled maintenance period has arrived, and maintenance should be performed promptly. Not all vehicle models can be manually reset; some models require specialized equipment from the manufacturer to clear the code. 2. If you frequently drive in harsh environmental conditions, maintenance should be performed before the maintenance light comes on.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.