What engine does Dongfeng Shuai Ke use?

2 Answers
Menezes
07/28/25 11:03pm
Dongfeng Shuai Ke's engine is produced by Mianyang Xinchen Power Machinery Co., Ltd., and it is a domestic engine. The 1.5L version of Dongfeng Shuai Ke uses the 4A15 engine model, with a maximum torque of 132 Nm and a maximum horsepower of 102. The 1.6L version uses the TU5JP4 engine model, with a maximum torque of 150 Nm and a maximum horsepower of 113. For daily maintenance of the Dongfeng Shuai Ke engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
16
2
Share
OLouis
08/12/25 3:29am
As an experienced driver, I've found that the Dongfeng Sokon typically uses a 1.6-liter four-cylinder gasoline engine, with models like the DFMB16. In daily driving, the engine provides adequate power, with stable starts and moderate acceleration, making it suitable for urban commuting or cargo transport. In terms of fuel consumption, it averages about 7-8 liters per 100 kilometers in the city and drops to 6-7 liters on highways—not exceptionally economical but not wasteful either. For maintenance, I change the regular engine oil every 5,000 kilometers and check the spark plugs and air filter to prevent carbon buildup from affecting performance. Overall, it's quite reliable, capable of running over 100,000 kilometers with few issues. In cold winters, it starts a bit slower and requires preheating to avoid shaking. This engine is a mainstream choice among domestic vehicles, offering good value for money, making it suitable for family users and small business owners.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What are the three oil filters?

Oil three filters refer to the air filter, oil filter and fuel filter. The functions of the three oil filters are as follows: 1. Ensure the air entering the engine is clean. There is a lot of dust suspended in the air, mainly composed of silicon dioxide, which is a substance harder than metal. Installing an air filter can reduce the wear of parts such as cylinders, pistons and piston rings. 2. Ensure fuel cleanliness and prevent vapor lock. During the storage, transportation and refueling process of gasoline, it is inevitable that some impurities and water will be mixed in. These impurities will be brought into the fuel supply system and engine cylinders along with the fuel, accelerating cylinder wear. Before gasoline enters the fuel pump, it must be filtered to ensure the normal operation of the fuel supply system. 3. Filter the oil to ensure the normal operation of the engine. During the use of internal combustion engines, mechanical impurities such as dust, metal wear debris, and carbon deposits will continuously mix into the oil. At the same time, the oxidation of the oil by air and combustion exhaust gas will gradually produce colloids in the oil. The mixture of mechanical impurities and colloids will also form sludge, which will not only accelerate the wear of moving parts but also easily cause oil passage blockage. To ensure the cleanliness of the oil, the engine is equipped with an oil filter in the lubrication system.
16
0
Share

How to adjust the air conditioning for cooling in a Toyota Levin car?

Press the A/C button located at the lower right corner of the center console screen to turn on the air conditioning, then rotate the right circular knob to the blue zone. The car will start cooling. Here are some related information: 1. The car air conditioning has both cooling and heating systems. The heating system utilizes the car's own heat cycle and does not require the compressor to work. The A/C button activates the air conditioning cooling function, and pressing it means the compressor starts working, which will increase fuel consumption. 2. Choose an appropriate temperature when using the car air conditioning. Setting the temperature too low can affect your health, so it's important to adjust the temperature properly. Normally, the temperature inside the car should be 5°C–6°C different from the outside temperature. 3. Try not to use the air conditioning when driving at low speeds. If you encounter traffic congestion, avoid increasing the engine speed to enhance the air conditioning efficiency, as this can negatively impact the lifespan of both the engine and the air conditioning compressor. 4. Do not turn off the engine before turning off the air conditioning. Some car owners often remember to turn off the air conditioning only after turning off the engine, which is harmful to the engine. This is because the next time the car starts, the engine will have to bear the load of the air conditioning, and such a high load can damage the engine.
2
4
Share

What does 4WD mean when it appears on the car?

4WD stands for four-wheel drive, which is the abbreviation of the English term 4-wheel-drive. Four-wheel drive systems include full-time 4WD, part-time 4WD, and on-demand 4WD. The specific introductions are as follows: 1. Full-time 4WD: Vehicles equipped with a full-time 4WD system are always in four-wheel drive. This system is commonly found in some luxury SUV models, such as the BMW X5 and Audi Q7. 2. Part-time 4WD: This system allows drivers to switch between 4WD and 2WD via a switch inside the vehicle. Most off-road vehicles with part-time 4WD also feature a low-range 4WD function. When switched to low-range 4WD, the wheel torque is further amplified, helping the vehicle escape difficult terrain. Vehicles with part-time 4WD include the Toyota Land Cruiser Prado and Jeep Wrangler. 3. On-demand 4WD: This system is typically used in some urban SUVs or front-wheel-drive vehicles with transverse-mounted engines. Vehicles with on-demand 4WD usually operate in front-wheel drive mode, and power is distributed to the rear wheels only when the front wheels slip or during full-throttle acceleration. On-demand 4WD has lower costs and fuel consumption, making it suitable for urban SUVs and sedans.
11
4
Share

What Causes High Fuel Consumption in the Buick Excelle?

The main reasons for high fuel consumption in the Buick Excelle are: 1. Poor fuel flow: Excessive carbon buildup can clog the fuel system, leading to increased fuel consumption. 2. Brake abnormalities: If the brake pads fail to retract properly, the vehicle may remain in a braking state while driving. 3. Spark plug malfunction: Typically, spark plugs need replacement after 20,000-30,000 kilometers. If you notice unusually high fuel consumption, check if the spark plugs are igniting properly. 4. Dirty air filter: Timely replacement of the air filter during vehicle maintenance is crucial, as a clogged filter can restrict airflow and increase fuel consumption.
10
5
Share

How to Understand Driving on the Right Side of the Road?

Driving on the right side of the road means that vehicles travel on the right side of the road. Most countries adopt right-hand traffic, with the steering wheel on the left. Due to historical conventions, the United Kingdom practices left-hand traffic, using vehicles with the steering wheel on the right. Only a few countries like Japan, the UK, and Commonwealth nations follow this driving style, where the steering wheel is on the right. Introduction: There are two vehicle traffic systems in the world: left-hand traffic and right-hand traffic. Currently, nearly 90% of countries adopt right-hand traffic. Right-hand Traffic: At present, China adopts right-hand traffic. Right-hand traffic is more conducive to human coordination in gear manipulation, allowing for more flexible use of various functions on the center console. The drawback is that since human vision is predominantly right-eye dominant, in right-hand traffic situations where an oncoming vehicle is on the left and obscured by a vehicle ahead, observation and reaction might be slightly slower. Left-hand Traffic: The core of left-hand traffic is based on human instinctive reactions. Because the human heart is on the left side, when drivers encounter danger, they instinctively lean or turn left to protect the heart, avoiding more severe chain accidents by steering toward the center of the road in emergencies. The disadvantage is that it requires using the left hand to control the gear, which may require an adaptation period for human coordination.
2
3
Share

Can a 10-year-old Golf still be driven?

Generally, the normal service life of a car is fifteen years, after which it requires biannual inspections. Here are the specific details: 1. Mileage: The lifespan of a car is related to its mileage. Under normal usage, it can be driven until the end of its service life. If driven 100,000 kilometers per year, it may need to be scrapped before reaching 10 years. 2. Golf Introduction: This car boasts impressive power performance. Despite being a compact sedan, its 1.4T engine and 7-speed dual-clutch transmission deliver performance comparable to B-segment cars. Additionally, the engine utilizes direct injection technology, which enhances fuel efficiency.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.