What Effect Does Dashboard Wax Have on Plastic?

Engine Malfunction Light Keeps Flashing

Reasons for the engine malfunction light flashing: 1. The vehicle's malfunction light is usually triggered by the fuel emission system. When the light is on, try starting and turning off the vehicle three times, then observe whether the malfunction light remains illuminated. 2. If the light remains on, promptly visit a repair shop to check the fault codes to determine whether it's an engine issue or a sensor malfunction. If the light turns off, it might be a sporadic fault, and immediate inspection may not be necessary. 3. When the onboard computer receives parameters from the oxygen sensor indicating that the exhaust emissions significantly exceed national standards and cannot be adjusted back within the standard range, the engine control unit will activate the pollution emission warning light on the dashboard. This alerts the owner to visit a service station to inspect the cause of the engine pollution light.

10

2

Share

Car Won't Start Immediately After Being Turned Off

There are many reasons why a car won't start after being turned off, usually due to fuel injector leakage, a damaged carbon canister solenoid valve causing an overly rich fuel mixture, intake air temperature sensor issues, or possibly fuel quality problems and engine carbon buildup leading to an overly lean fuel mixture. Solutions when the car won't start after being turned off are as follows: 1. If you're out driving and the car won't start, don't panic. In the trunk of the car, find the tire wrench, or look for a hard object like a rock or brick by the roadside. Climb under the car and locate the fuel tank area - the fuel pump is positioned between the tank's triangular brackets. 2. When the carbon brushes and brush holder are stuck together, use the found wrench or rock to tap this area a few times, then try starting the car again - it should start smoothly.

5

0

Share

What is the difference between Ora R1 and Ora Black Cat?

There is no difference between Ora R1 and Ora Black Cat. Ora R1 has been renamed to Black Cat, and they are the same car. Here is some information about Ora R1: 1. Ora R1 is a new energy vehicle based on the ME platform, China's first dedicated electric vehicle platform created by Great Wall Motors, positioned as a 'new generation of electric mini cars.' 2. The new energy vehicle brand Ora held a launch event in Beijing for the ORA-R1, introducing four models: the Agile Edition, Fun Edition, Smart Edition, and Premium Edition. 3. With the launch of the Ora ORA brand, China's first dedicated electric vehicle platform, the ME platform, also made its debut. From the chassis to the interior and exterior, it incorporates advanced smart connectivity technologies, achieving substantial breakthroughs in space, safety, efficiency, and more.

2

5

Share

How Often Should Brake Fluid Be Replaced in a Sedan

Typically, the replacement interval for brake fluid is every 2 years or 50,000 kilometers, whichever comes first. The process of replacing brake fluid is as follows: 1. Start the engine and keep it idling, then unscrew the cap of the brake fluid reservoir. 2. Attach a transparent plastic tube to the bleeder screw of the wheel cylinder, with the other end of the tube placed into a container filled with brake fluid. 3. Loosen the bleeder valve and continuously press the brake pedal until no more brake fluid flows out, then tighten the bleeder valve. 4. Add an adequate amount of the specified brake fluid to the reservoir. Precautions for brake fluid replacement: 1. Air entering the brake system can affect braking performance. 2. Especially after replacing or topping up brake fluid, air in the hydraulic lines should be bled out. 3. During maintenance, if air enters the system due to disassembly of the hydraulic system, loose connections, or insufficient brake fluid, it should be promptly bled from the system.

14

3

Share

Reasons for Brake Master Cylinder Damage?

Reasons for brake master cylinder damage are as follows: 1. Dirty oil quality, leading to brake pipe blockage, causing excessive pressure in the master cylinder. Over time, braking becomes ineffective, and the oil pump is prone to damage. 2. Low oil quality or prolonged deterioration, making it easy to corrode the sealing rubber cup inside the master cylinder. Over time, this results in poor sealing, inability to retain oil, and loss of oil pressure. 3. Frequent lack of oil or dry grinding can cause wear on the rubber cup. 4. Frequent use of brakes can also be detrimental to the braking system. Here is more information about the brake master cylinder: 1. The brake master cylinder, also known as the "brake main cylinder" or "brake master cylinder," is a key component of the vehicle's braking system. 2. Depending on the vehicle type, it is divided into two types: air brake master cylinder and oil brake master cylinder. Generally, passenger vehicles such as cars and minivans mostly use oil brake master cylinders. 3. Commercial vehicles like trucks and tractors usually use air brake master cylinders.

14

3

Share

How to Reset the Tire Pressure Warning?

Here are the methods to reset the tire pressure warning indicator: 1. Reset the fault light to eliminate it. 2. Press and hold the SET button with the tire pressure symbol in front of the gear lever. If the tire pressure returns to normal, the warning light will be eliminated. 3. Press and hold the tire pressure monitoring button until the warning light goes off to reset it. 4. Reset it through the settings in the multifunction steering wheel or use a computer detector to reset it. The functions of the tire pressure monitoring system are as follows: 1. Prevent accidents. Safe driving is the most critical. The tire pressure monitoring system is an active safety device that can immediately alert when there are signs of danger in the tires, reminding the driver to take appropriate measures, thereby preventing serious accidents. 2. Extend tire lifespan. With the tire pressure monitoring system, the tires can always operate within the specified pressure and temperature range, reducing tire damage and extending their lifespan. 3. Make driving more economical. When the tire pressure is too low, the contact area between the tire and the ground increases, increasing friction resistance. When the tire pressure is 30% below the standard value, fuel consumption will increase by 10%. 4. Reduce wear on the suspension system. When the tire pressure is excessive, the tire's shock absorption effect is reduced, increasing the load on the vehicle's shock absorption system. Long-term use can cause significant damage to the engine chassis and suspension system.

4

3

Share

What Effect Does Dashboard Wax Have on Plastic?

Engine Malfunction Light Keeps Flashing

Car Won't Start Immediately After Being Turned Off

What is the difference between Ora R1 and Ora Black Cat?

How Often Should Brake Fluid Be Replaced in a Sedan

Reasons for Brake Master Cylinder Damage?

How to Reset the Tire Pressure Warning?

Can a C1 Driver's License Drive a 7-Seater Vehicle?

What is the purpose of the Lexus hold button?

What Causes Windshield Washer Fluid Leakage?

What are the symptoms of a bad inner tie rod end?