What driving mode is generally used for urban driving?

1 Answers
BrookeLee
07/30/25 8:52am
ECO mode can be selected for urban driving. Introduction to ECO mode: ECO mode is a driving mode that leans more towards fuel efficiency compared to normal D-gear driving, with relatively slower acceleration; it is another special mode besides the S-gear that emphasizes a sense of acceleration, providing car owners with an additional choice. Categories of ECO mode: ECO mode is divided into active and passive types. For models with active ECO mode, there is usually a dedicated button, or a virtual button can be set in the intelligent driving mode selection system, allowing car owners to choose whether to turn on ECO mode. Usage method: When ECO mode is activated, it reduces the response rate of power output, minimizes unnecessary fuel injection, and makes the RPM smoother. It is generally recommended for stop-and-go traffic conditions in urban areas. Under ECO mode, the throttle response is less sensitive, and the power comes more gently. Even if the accelerator is pressed deeply, the sense of push-back is barely noticeable. Besides saving fuel consumption, it also enhances the driving experience.
Was this review help?
19
2
Share
More Forum Discussions

Is Filing Required for Motorcycle Wheel Hub Color Change?

Changing the color of a motorcycle's wheel hubs does not require filing, as long as the model, size, and dimensions of the wheel hubs remain unchanged. According to Article 6 of Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, no registration for modification is required. Conversely, if it exceeds 30%, filing is necessary, and registration must be completed within 10 days after the color change. Notes on Vehicle Color Change: Before changing the color of a motor vehicle, it is necessary to consult the local vehicle management office where the vehicle is registered to confirm whether the region permits color changes. If the region does not support this modification, filing procedures cannot be processed after the change, and the vehicle must be restored to its original color. Documents required for applying to change the body color of a motor vehicle: "Motor Vehicle Modification Registration Application Form." Identity proof of the motor vehicle owner and agent. Motor vehicle registration certificate. Motor vehicle driving license. Additionally, according to the "Motor Vehicle Registration Regulations," owners are no longer required to apply in advance to the vehicle management office. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply for modification registration with the vehicle management office. According to Article 10, registered motor vehicles must apply for modification registration with the local vehicle management office in the following cases: Change of body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change of use nature, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. Change of the motor vehicle owner's residence in or out of the vehicle management office's jurisdiction. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and signal lights as required. Other motor vehicles are prohibited from painting, installing, or using patterns, alarms, or signal lights exclusive to or similar to those of the aforementioned vehicles. Article 56 of the "Motor Vehicle Registration Regulations" states that if the body color is changed without completing the required modification registration, the public security traffic management department may issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color.
1
2
Share

What Maintenance Does a New Energy Vehicle Require?

New energy vehicle maintenance involves the following steps: 1. Avoid high-current discharge: When starting, carrying passengers, or going uphill, try to avoid sudden acceleration, which can cause instantaneous high-current discharge. High-current discharge can easily lead to the formation of lead sulfate crystals, damaging the physical performance of the battery plates. 2. Never store the vehicle with a depleted battery: A depleted battery state occurs when the battery is not promptly recharged after use. This state can lead to sulfation, blocking the ion channels, resulting in insufficient charging and reduced battery capacity. The correct practice is to charge the battery once a month when it is not in use to maintain its health. However, thanks to modern BMS (Battery Management System), even slightly prolonged charging will not affect the vehicle. 3. Master the correct charging time: During use, accurately determine the charging time based on actual conditions, considering frequency of use and mileage. If the battery gauge shows red and yellow lights during normal operation, it's time to charge. If only the red light remains, stop operation and charge as soon as possible, as excessive discharge can severely shorten battery life. Charging immediately after short usage is not advisable, nor should charging time be excessively long, as overcharging can cause the battery to overheat. Overcharging, over-discharging, and insufficient charging all reduce battery lifespan. Typically, the average charging time for a battery is around 10 hours. If the battery temperature exceeds 65°C during charging, stop the process. 4. Regularly check tire pressure: Maintain correct tire pressure by checking it every two weeks or at least once a month. Incorrect tire pressure can increase power consumption, reduce driving range, decrease comfort, shorten tire lifespan, and compromise safety. 6. Avoid direct sunlight: Never expose the electric vehicle to direct sunlight. High temperatures can increase internal battery pressure, leading to water loss, reduced battery activity, and accelerated plate aging. 7. Periodic inspections: If the vehicle's range suddenly drops significantly by over ten kilometers in a short period, it's likely that at least one battery in the pack is faulty. In such cases, promptly visit a sales center or authorized service center for inspection, repair, or battery pack reconfiguration.
7
2
Share

Can You Pass Subject 1 by Completing the Streamlined 500 Questions?

The streamlined 500 questions are designed to help students save practice time by eliminating simple common-sense questions, rarely tested questions, and questions with obvious answers. Therefore, completing the streamlined 500 questions should be sufficient to pass Subject 1. However, specific cases require specific analysis, and it's essential to read each question carefully during the exam. Additional reference materials are as follows: Driving Test Tips: Do not cross solid lines or pass over dashed lines; yield more to obstacles ahead. Turn left first, then right; when encountering water, maintain a low gear and steady speed; yield to those cutting in line. Use low gear for sufficient power when going uphill and to reduce accidents when going downhill; give way to special vehicles. On the road, pay attention to markings and signs; when overtaking, keep to the right. In case of a flat tire, stabilize the steering and gently apply the brakes. Do not drive assembled vehicles on the road; doing so will result in license revocation. Do not stop at gas stations or fire hydrants; if stopping is necessary, maintain a distance of 30 meters. On curves, keep to the right, avoid overtaking or occupying lanes, and park at least 50 meters away. On mountain roads, do not overtake; give way to the side with the cliff. When crossing water, stop first, then look twice before proceeding. Encountering deer means wildlife; encountering cattle means livestock. Pay attention to yellow road signs indicating children, pedestrians, and bicycles.
17
3
Share

What is the wading depth of the Lavida?

The maximum wading depth of the Volkswagen Lavida is 300mm. The wading depth of the Volkswagen Lavida is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally speaking, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Volkswagen Lavida is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in the water, which could cause severe engine damage due to water ingress. Judge the underwater road conditions based on the passage of the vehicle ahead and choose a suitable entry point. Observe the path taken by other vehicles and drive slowly along the same path, avoiding sudden acceleration or deceleration. For roads prone to water accumulation, observe warning water level markers, trees, and other reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Understand your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed recklessly; instead, choose an alternative route.
15
5
Share

How long does it usually take to receive a text message after running a red light?

After running a red light, you will generally receive a notification within 3 to 7 days, with the latest being around 13 days. However, some cities have now introduced "instant electronic police capture alerts," where you can receive a text message notification within 5-10 minutes of being captured. However, this notification does not equate to a traffic violation; it is merely a capture alert. Whether it is ultimately deemed a violation will take 3-7 days to confirm. If it is indeed a violation, you will receive another text message notification. For traffic violations captured by surveillance cameras, vehicle owners usually do not receive the violation text message immediately. There is a delay, and the length of this delay can vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center. After aggregation, it is then handed over to the relevant traffic police department staff for verification. Once the violation is confirmed, the system will automatically query the corresponding vehicle owner's mobile phone number based on the license plate information. Only then will the violation details be sent to the vehicle owner via text message. After receiving the violation text message, the vehicle owner must settle all previous violations within one month before the annual vehicle inspection. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation text message is received after 15 days, it is likely that no violation was recorded. Traffic violation query methods: Traffic violation queries refer to checking motor vehicle violations of traffic management through online or terminal methods. Methods for querying traffic violations include website queries, phone queries, text message queries, mobile app queries, and offline terminal queries. Website query: You can search for "vehicle violation query" and input your vehicle information to check. Phone query: You can call the local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location of the violation or the vehicle license plate issuance location. For on-site violations, such as those directly caught by a traffic officer, they must be processed at the violation location. Text message query: Open your phone's text message interface; enter "WZ [license plate number] [license plate color]" in the message content; input 1062650001 as the recipient and click send. Mobile app query: Open the "Traffic Management 12123" app, select "violation query," and find any unprocessed violations to clear them. Offline terminal query: You can visit the local traffic management hall and use the self-service query machine to input your license plate number and check recent violation records.
9
0
Share

Why does the Geely Emgrand make noise when shifting into reverse gear?

Geely Emgrand makes noise when shifting into reverse gear mainly due to transmission issues. Here are the solutions for the noise when shifting into reverse gear in the Geely Emgrand: The transmission has many components, and the causes of noise are complex. When analyzing and diagnosing, pay attention to: whether the noise is related to specific speeds, such as some planetary gears being more noticeable around 50Km/h. Whether it is related to certain gears, which is crucial for diagnosing transmission faults. If noise occurs in a specific gear, it is likely related to the components affecting that gear's transmission. If noise occurs in all gears, it is often due to issues with the constant-mesh gear shaft or insufficient transmission oil. Whether it is related to specific actions, such as shifting gears, starting, rapid acceleration, rapid deceleration, or turning, which are effective ways to diagnose abnormal noises. Changing speed and direction is particularly important for diagnosing rear axle issues. Here are the solutions for difficulty in shifting gears after wading in the Geely Emgrand: Difficulty in shifting gears after wading in the Geely Emgrand is caused by the clutch sticking due to water ingress, leading to incomplete disengagement. The only solution is to replace the clutch disc and pressure plate. Avoid shifting gears while wading. Driving in low gear at a slow speed is the safest way to wade through water. Before wading, assess the water depth, flow speed, underwater conditions, and the width of the entry and exit points, as well as the road conditions, to determine if it is safe to proceed.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.