What does Yinglang GT represent?

How to Correct Late Steering When Reversing into a Parking Space?

The mnemonic for correcting early or late steering when reversing is: if you steer too early and the right side is narrow, turn the wheel back to the left; if you steer too late and the left side is narrow, keep the wheel turned fully to the right. Additionally, it's important to control the speed with the clutch pedal. Only when the speed is sufficiently low will you have enough time to make corrections. When checking the rearview mirrors, you don't necessarily need to sit up straight. Slightly leaning your head forward can help you accurately observe the position of the car body relative to the parking space corner. The correction methods for early or late steering when reversing into a parking space are as follows: 1. Steering too early: If the distance between the car body and the right front corner of the parking space is less than 30 cm, you can turn the wheel back by half a turn if it's slightly less than 30 cm. If you're about to hit the corner, straighten the wheel. 2. Observing through the left and right rearview mirrors: Observe the position of the car body relative to the boundary lines through the left and right rearview mirrors. When the car body is almost parallel to the lines, straighten the wheel.

11

4

Share

Why Can't the Automatic Transmission Gear Be Engaged?

The reasons why the automatic transmission gear cannot be engaged are: 1. Internal failure of the gearshift assembly; 2. Malfunction of the internal control module of the transmission; 3. Failure of the transmission gear position switch. An automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. The steps to start an automatic transmission vehicle are: 1. After the driver sits in the driver's seat, press the start button directly; 2. Depress the brake pedal and press the start button to ignite and start the engine; 3. Release the foot brake and let the vehicle warm up in place; 4. Depress the brake pedal again and shift to D gear; 5. Release the handbrake and slowly release the foot brake to start the vehicle.

15

0

Share

How to Check an Automotive Electronic Voltage Regulator?

Automotive electronic voltage regulator inspection method is: 1. Connect the tester's positive terminal to the regulator's positive post, ground to the regulator's ground post, and use a wire to connect the field terminal to the carbon brush; 2. Use a test lamp to check if the carbon brush has power - if the bulb lights up, the electronic regulator is functioning normally; if not, it indicates damage. The working principle of an automotive electronic voltage regulator is: When the engine's output voltage becomes low or fails due to other reasons, the battery will generate current in the generator's windings. The electronic regulator then cuts off this reverse current to prevent excessive current in the motor windings from damaging the generator. The electronic voltage regulator is an alternator with intuitive charging indication and fault display functions.

7

4

Share

What are the reasons for severe carbon buildup in fuel injectors?

The reasons for severe carbon buildup in fuel injectors are: 1. Insufficient oxygen supply, which prevents complete combustion of the gas in the cylinder; 2. Frequent driving in congested road conditions, where fuel enters the combustion chamber but fails to burn completely. The fuel injector is located on the intake manifold of the direct-injection cylinder block, and its functions are: 1. To facilitate complete combustion; 2. To supply fuel to the engine. The working principle of a fuel injector is: When the electromagnetic coil is energized, it generates suction, lifting the needle valve and opening the injection hole. Fuel is sprayed at high speed through the annular gap between the needle valve head and the injection hole, forming a mist.

10

5

Share

How to Replace Refrigerant in a Car Air Conditioner?

To replace the refrigerant in a car air conditioner, follow these steps: 1. Evacuate the system and close the manual valves on the pressure gauge along with the high and low-pressure manual valves; 2. Connect one end of the hose to the injection valve fitting of the refrigerant canister; 3. Open the refrigerant canister, loosen the nut on the pressure gauge hose to allow some gas to escape, then close it; 4. Open the high-pressure side manual valve and invert the canister; 5. Inject the specified amount of liquid refrigerant, then close the refrigerant injection valve and the high-pressure manual valve. To determine if the car air conditioner lacks refrigerant: 1. If bubbles continuously appear in the sight glass during normal operation, it indicates insufficient refrigerant; 2. If no bubbles appear in the sight glass during normal operation but briefly appear when the air conditioner stops, it indicates the refrigerant level is normal.

9

5

Share

What are the symptoms of a faulty ABS pump?

When the ABS pump fails, the following symptoms may occur: 1. During emergency braking, the system cannot prevent wheel lock-up, posing a safety hazard; 2. The ABS warning light will illuminate, and the brake pads may fail to reset. The functions of ABS include: 1. Maximizing braking efficiency to reduce braking time and distance; 2. Effectively preventing vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; 3. Allowing steering control during emergency braking for improved maneuverability. Common causes of ABS pump failure are: 1. Faulty ABS wheel speed sensors; 2. ABS wiring connection issues; 3. ABS control unit programming errors; 4. ABS master cylinder malfunction.

4

2

Share

What does Yinglang GT represent?

How to Correct Late Steering When Reversing into a Parking Space?

Why Can't the Automatic Transmission Gear Be Engaged?

How to Check an Automotive Electronic Voltage Regulator?

What are the reasons for severe carbon buildup in fuel injectors?

How to Replace Refrigerant in a Car Air Conditioner?

What are the symptoms of a faulty ABS pump?

What level of SUV is the CHR?

What to Do When Engine Coolant Temperature is Too High?

Does It Matter If the Tread Patterns of the Rear Tires Are Inconsistent?

What Causes the Engine Fault Light to Illuminate and the Car to Shake?