What does XL mean in 2.0XL?

What is the replacement interval for the brake discs on a Hyundai Verna?

The replacement interval for the brake discs on a Hyundai Verna is between 70,000 to 80,000 kilometers. The brake disc is a circular disc that, when the brakes are applied, is clamped by the brake caliper to slow down or stop the vehicle. Taking the 2020 Hyundai Verna as an example, it is classified as a compact car with the following dimensions: length 4300mm, width 1705mm, height 1460mm, a wheelbase of 2570mm, a fuel tank capacity of 43 liters, and a curb weight of 990kg. The 2020 Hyundai Verna features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L naturally aspirated engine producing a maximum horsepower of 95PS, a maximum power output of 70kW, and a peak torque of 132.4Nm, paired with a 5-speed manual transmission.

19

1

Share

Where is the 15e4e engine produced?

15e4e engine is produced by SAIC Motor's Lingang factory, which is a 1.5L turbocharged engine. The function of the engine is to convert the heat energy of gasoline and diesel into mechanical energy by expanding the gas after combustion in a sealed cylinder to push the piston to do work. The maintenance methods of the engine are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the scale in the radiator; 4. Regularly clean the carbon deposits in the engine; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable speed. The types of engines include: 1. Gasoline engine and diesel engine; 2. Water-cooled engine and air-cooled engine; 3. Single-cylinder engine and multi-cylinder engine; 4. Single-row engine and double-row engine; 5. Naturally aspirated engine, turbocharged engine and supercharged engine.

13

5

Share

How to Properly Break In a New Car?

Nowadays, breaking in a new car is different from before. Car engines have undergone cold running-in treatment before leaving the factory, so there are fewer precautions during the break-in period. However, no matter what, you should still remember the following points in the initial stage of a new car: 1. Regarding speed, do not exceed two-thirds of the maximum speed, and keep the engine RPM below 3000-3500 (different car manufacturers have different requirements for engine RPM). Avoid sudden acceleration and hard braking. 2. Do not overload the car, and regularly check tire pressure, coolant, and brake fluid. 3. When driving downhill for a long distance, pay attention to controlling the speed. Do not suddenly use engine braking to decelerate. For manual transmission models, anticipate gear shifts in advance and avoid shifting at inappropriate speeds.

8

5

Share

What is the battery model for the Mistra car key?

The battery model for the Mistra car key is CR2032, which is a standard small-sized button cell. Taking the 2021 Mistra as an example, it is a mid-size sedan with the following dimensions: length 4780mm, width 1815mm, height 1460mm, a wheelbase of 2770mm, and a curb weight of 1357kg. The 2021 Mistra features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T turbocharged engine that delivers a maximum horsepower of 170PS, a maximum torque of 253Nm, and a maximum power output of 125kW, paired with a 7-speed dual-clutch transmission.

3

Share

What are the hazards of not performing wheel alignment?

The hazards of not performing wheel alignment include: 1. Heavy steering, shaking, deviation, misalignment, or failure to return to center; 2. Uneven tire wear. Wheel alignment involves adjusting the geometric angles of the tires, steering, and suspension components to ensure tight contact between the tires and the ground. Situations that require wheel alignment include: 1. Damage to the chassis and suspension due to accidents; 2. Replacement of steering system and components; 3. Uneven wear on the front or rear tires; 4. Replacement or adjustment of the suspension system; 5. The vehicle pulling to the left or right when driving straight. Benefits of wheel alignment: 1. Significant benefits for tires; 2. Improved handling; 3. Enhanced fuel efficiency; 4. Ensured driving safety.

4

3

Share

What kind of engine does Borgward use?

Borgward vehicles are equipped with turbocharged direct injection engines. The engine displacement varies depending on the model. Specific models are as follows: 1. The Borgward BX7 uses a 2.0L turbocharged direct injection engine, delivering powerful performance with 28T165kW and 300N·m. 2. The Borgward BX7TS is equipped with a 2.0T turbocharged direct injection engine, with a maximum power of 180kW and a maximum torque of 340Nm, achieving 0-100km/h acceleration in just 9.0 seconds. 3. The Borgward BX5 features a 1.4T turbocharged direct injection engine, with a maximum power of 110kW and a maximum torque of 250N·m. 4. The Borgward BX6 is powered by a 2.0T turbocharged engine across the entire lineup, with a maximum output of 224 horsepower and a peak torque of 300N·m.

3

Share

What does XL mean in 2.0XL?

What is the replacement interval for the brake discs on a Hyundai Verna?

Where is the 15e4e engine produced?

How to Properly Break In a New Car?

What is the battery model for the Mistra car key?

What are the hazards of not performing wheel alignment?

What kind of engine does Borgward use?

What transmission does the Fengshen AX7 use?

What to Do If the Vehicle Registration Certificate Is Lost

How to Turn Off the Rear Wiper of Qoros 5?

What are the differences between Mercedes-Benz C-Class and E-Class?