···
Log in / Register

What does Xingyue Evo mean?

1Answers
LaDonovan
07/28/2025, 03:25:33 AM

Xingyue Evo means the evolved version of Xingyue. Here are the specific details: 1. Automotive aspects: Equipped with a Zhiqing 2.0T turbocharged engine + Aisin 8AT for strong sports performance. It can achieve 0-100 km/h acceleration in 6.8 seconds. Xingyue is a high-end sports SUV, a new flagship SUV from Geely built with technical excellence. Based on the CMA architecture, this coupe SUV offers two engine options: the JLH-3G15TD 1.5T engine and Volvo's 2.0TD engine, with maximum power outputs of 177 horsepower (130 kW) and 238 horsepower (175 kW), respectively. 2. Configuration: Features include a flat-bottom multifunction steering wheel, Valeo matrix headlights, premium Bose audio system, Paris fragrance system, sports suede memory seats, ICC intelligent navigation, APA fully automatic intelligent parking, AEB urban pre-collision safety, LKA lane-keeping system, Bosch 9.3 generation ESP system, 22 top-tier industry sensors, and L2-level intelligent driving capabilities.

Was this review help?
117
Share
More Q&A

What is the maximum validity period of a temporary license plate?

Temporary license plates have a maximum validity period of 90 days. A temporary license plate is a provisional vehicle travel certificate issued by the vehicle management department of public security authorities when a car has not yet been officially registered due to certain procedures being processed. Temporary license plates are divided into: 1. Temporary license plates for administrative jurisdictions; 2. Temporary license plates for cross-administrative jurisdictions; 3. Temporary license plates for testing purposes; 4. Temporary license plates for special-type motor vehicles. The materials required to apply for a temporary license plate include: 1. Identity documents of the vehicle owner and the agent; 2. Proof of the vehicle's origin; 3. The whole vehicle factory qualification certificate for domestically produced motor vehicles, or the import certificate for imported motor vehicles; 4. The vehicle identification code and engine number rubbing. There are two temporary license plates in total, one to be affixed to the lower left or right corner of the front windshield, and the other to the lower left corner of the rear windshield.
109
Share

Which province does the 'Jin' license plate belong to?

The 'Jin' license plate belongs to Shanxi Province. The license plate numbers for various regions in Shanxi Province are as follows: Jin A - Taiyuan City, Jin B - Datong City, Jin C - Yangquan City, Jin D - Changzhi City, Jin E - Jincheng City, Jin F - Shuozhou City, Jin H - Xinzhou City, Jin J - Lvliang City, Jin K - Jinzhong City, Jin L - Linfen City, Jin M - Yuncheng City. Precautions for license plate installation are: 1. License plate installation position: The front license plate should be installed in the middle or right side of the front, and the rear license plate should be installed in the middle or left side of the rear; 2. License plate installation requirements: Special sealing devices for motor vehicle license plates must be used, with complete sealing and firm installation; 3. Requirements for installing license plate brackets: The inner edge of the license plate bracket should be more than 5 millimeters away from the edge of the motor vehicle number characters.
109
Share

What Are the Effects of Excessive Engine Oil on the Engine?

Excessive engine oil can have the following effects on the engine: 1. Reduced power output; 2. Exceeding emission standards, impacting the environment; 3. Decreased performance and potential damage to the catalytic converter; 4. Increased noise, elevated crankcase pressure, and higher engine temperatures; 5. Generation of excessive oil vapor, leading to carbon buildup on the throttle, valves, and engine. Methods to address excessive engine oil include: 1. Draining the oil by removing the oil drain plug; 2. Using an oil pump to extract the excess oil. The functions of engine oil are: 1. To separate the surfaces of moving parts, reducing wear; 2. To carry heat back to the oil pan and dissipate it into the air, aiding the radiator in cooling the engine; 3. To transport carbon deposits, sludge, and metal wear particles back to the oil pan through circulation, keeping the working surfaces of parts clean.
108
Share

Why Can't the Car Trunk Close Suddenly?

The reasons why the car trunk suddenly cannot close are: 1. The automatic lift switch uses an overly stiff spring rod; 2. The closing limit rubber block does not match the locking mechanism properly; 3. The trunk control circuit is faulty; 4. The trunk hydraulic support rod is faulty. The methods to open the car trunk are: 1. Open the car door, pull up the button below the handle forcefully, then push the trunk upwards; 2. Press the one-touch trunk opening button in the middle of the car key, hold it for about three seconds, and the trunk will open. The car trunk is a place for storing spare items and transporting goods, including: 1. The car's spare tire; 2. The vehicle's first aid kit; 3. The onboard tool kit; 4. The triangle warning sign; 5. The fire extinguisher; 6. The car refrigerator; 7. The emergency pull cord for the fuel tank cap.
112
Share

What are the reasons for the car engine light to come on?

The reasons for the car engine light to come on include: 1. Poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinder, resulting in carbon deposits; 2. Carbon deposits in the intake tract and piston top causing poor atomization and incomplete combustion; 3. Excessive mileage of the engine, weakening the working characteristics of the spark plugs; 4. Faulty ignition coils causing poor ignition and incomplete combustion; 5. Excessive vehicle age leading to mechanical aging, poor engine condition, and suboptimal combustion and ignition. The engine is the device that provides power to the car, determining its power, fuel economy, stability, and environmental friendliness. Its types include diesel engines, gasoline engines, electric vehicle motors, and hybrid engines.
106
Share

What are the differences between Mercedes-Benz C-Class and A-Class?

The differences between Mercedes-Benz C-Class and A-Class are: 1. Different models: Mercedes-Benz C-Class belongs to the mid-size car category; A-Class belongs to the compact car category. 2. Different body dimensions: Mercedes-Benz C-Class has a body size of 4784mm in length, 1810mm in width, and 1457mm in height; A-Class has a body size of 4622mm in length, 1796mm in width, and 1454mm in height. 3. Different drive modes: Mercedes-Benz C-Class is front-engine rear-wheel drive; A-Class is front-engine front-wheel drive. Both Mercedes-Benz C-Class and A-Class belong to Beijing Benz's vehicle lineup. Other models under Beijing Benz include: Mercedes-Benz GLC, Mercedes-Benz S-Class, Mercedes-Benz B-Class, Vito, and Maybach S-Class.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.