What does vol mean?

1 Answers
OAdelyn
07/29/25 1:45am
The vol on the car is a button used to control the volume of the audio system. In automotive design, for the convenience of the driver to control the car's volume, a rotary button is set on the multifunction steering wheel, allowing the owner to adjust the volume by turning it up or down. The following is extended content: Rotary button on the center console: For the convenience of other passengers, a rotary button is also set on the center console, marked with plus and minus volume control keys, allowing direct adjustment of the car audio volume by rotating the button. Buttons on the steering wheel: The most convenient are the buttons located on the steering wheel, enabling the driver to operate directly while driving on the road without the need to look down for buttons, thereby improving driving safety.
Was this review help?
2
0
Share
More Forum Discussions

What are the regulations for license plate sealing screws?

License plate sealing screw regulations: 1. It is best to use the screws provided by the vehicle management office for the license plate. The vehicle management office usually provides 4 screws, which are printed with Chinese characters representing the local abbreviation and the code letters of the issuing authority; 2. If there are 4 holes in the installation position, four screws must be installed. If there are not, two screws must be installed. Failure to comply with the regulations will result in points deduction and fines. If the staff only provides 4 sealing screws but 8 are needed, you can request an additional 4 from the staff. If you choose to purchase sealing screws yourself, select screws with anti-theft notches to effectively prevent license plate theft. The regulations require that the license plate frame must be fixed and not allow the use of easily replaceable or detachable license plate frames.
20
1
Share

What are the normal parameters for the Cruze oil pressure sensor?

The repair manual indicates that the minimum oil pressure for the Cruze should not exceed 130 kPa, meaning the normal range is between 130 to 350 kPa. However, measurements should be taken at a coolant temperature of 80°C, with the standard value typically around 250 kPa. Below is relevant information about engine oil: 1. Function: Engine oil, or engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. 2. Classification: Gasoline engine oils are divided into mineral oils and synthetic oils, with synthetic oils further categorized into semi-synthetic and full-synthetic oils. 3. Composition: Engine oil consists of base oils and additives. Base oils are the primary component of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance of base oils, imparting new characteristics and forming an essential part of the lubricant.
11
4
Share

Should You Shift to Neutral When Waiting at a Red Light in an Automatic Car?

When waiting at a red light in an automatic car, shifting to neutral and engaging the handbrake is safer and more fuel-efficient. In neutral with the handbrake on, the passive wheel in the torque converter of the transmission idles without adding resistance to the engine operation, thereby reducing fuel consumption. If you wait in D (Drive) gear with the foot brake applied, the passive wheel in the torque converter remains fixed, creating a counterforce on the driving wheel that increases engine load, effectively hindering engine operation. Some modern vehicles feature an autohold function (automatic handbrake) that automatically applies the brakes when the vehicle comes to a stop, eliminating the need to shift from reverse or drive gears while maintaining the parked state.
19
0
Share

Where is the USB port located on the Roewe i6?

The USB port of the Roewe i6 is located in front of the gear lever. Here are the specific details about the USB port: 1. The USB port in cars is designed for transmitting audio data, and the current of the car's USB port can be either 5V/2.1A or 5V/0.5A. 2. The music formats supported by the USB port's multimedia player vary. Most cars support MP3 and WMA formats. 3. The player also has certain requirements for the music bitrate. When the bitrate exceeds the required range, the player cannot play the music. 4. If you use a USB flash drive to play songs, you can store the songs in the USB drive. It's better not to have too many formats, as the music format recognized by the car's computer is generally MP3.
3
2
Share

What is the parking method for automatic transmission cars?

Automatic transmission car parking method is: step on the brake to slow down to a stop; after stopping, shift into N gear; engage the handbrake; release the foot brake, confirm the vehicle is stationary; step on the foot brake again, shift into P gear, and turn off the engine. This method requires first shifting into N gear, then engaging the handbrake, followed by releasing the foot brake, stepping on the foot brake again to shift into P gear, and then turning off the engine. Automatic transmission usually refers to the car's automatic gear shifting mechanism, where the automatic transmission's control system automatically selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment of timing and gear shifting operations. Automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L.
15
5
Share

What kind of engine oil is used for the first maintenance of a new car?

The first maintenance of a new car uses the original factory engine oil, which is produced by oil manufacturers according to the requirements of the car manufacturers. The first maintenance items for a car include: 1. Changing the engine oil, oil filter, and cleaning the air filter, checking whether the generator belt and wiper blades are damaged; 2. Checking whether the levels of various fluids are normal; 3. Checking whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 4. Inspecting the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Checking whether all the switches and lights are working properly. Precautions for the first maintenance include: 1. Making an appointment in advance; 2. Bringing necessary items, such as the maintenance manual and vehicle registration; 3. Recording any faults or questions encountered during daily driving and informing the staff during the first maintenance registration.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.